Pre-order June/July 1kg PLA Filament 1.75mm – Coke Red
Estimated Delivery: June to July 2021
All pre orders are final sale. No exchange or refund.
Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. PLA is made for one purpose: safety. There's nothing more important than your healthy.
- Kids-friendly; low VOC
- Easy to use
- More brittle than ABS
- Smooth with sandpaper
- Paints with acrylic
- Compatible with most desktop 3D printers
- Certified by SGS
- Backed by our 15 days warranty
If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".
- Eye, nose and throat irritation
- Headache, loss of concentration and nausea
- Allergic skin reaction
Our Recommendation Settings
Extrusion temperature: 200 to 220 C
Print bed temperature: 66 to 70 C (optional)
Print speed: 30 to 90 mm/sec
Layer thickness: 0.05 to 0.40 mm
Access our full printing setting profile, and tricks & tips on printing PLA, check out: How to print with BotFeeder PLA?