1kg PLA Filament 1.75mm – Lemon Yellow
Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. PLA is made for one purpose: safety. There's nothing more important than your healthy.
- Kids-friendly; low VOC
- Easy to use
- More brittle than ABS; stronger than PURE PLA
- Smooth with sandpaper
- Paints with acrylic
- Compatible with most desktop 3D printers
- Certified by SGS
- Backed by our 15 days warranty
If you're interested in maintaining your filaments in top condition, check out our Filament Care page.
If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".
- Eye, nose and throat irritation
- Headache, loss of concentration and nausea
- Allergic skin reaction
At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.
Our Recommendation Settings
Extrusion temperature: 200 to 220 C
Print bed temperature: 66 to 70 C (optional)
Print speed: 30 to 90 mm/sec
Layer thickness: 0.05 to 0.40 mm
Access our full printing setting profile, and tricks & tips on printing PLA, check out: How to print with BotFeeder PLA?
We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.
For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.
For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.
15 DAYS WARRANTY
BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.