1kg ABS Filament 1.75mm – Red

Eligible for FREE SHIPPING

$35.00 CAD

BotFeeder Original ABS Filament

Engineer Grade
Impact Resistance
Heat Resistance
Outdoor & Indoor
Compatible with most 3D printers on the market

Temp. & Tips

At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.

This profile is optimized based on UFO 3D Printer. A good reference point of where to start.
3D printer type: delta
Nozzle size: 0.30 mm
Resolution: 0.10 mm
Extrusion temperature: 250 C
Print bed temperature: 110 C
Print speed: 65 mm/sec (default speed)
Adhesion type: brim
Retraction distance: 4.5 mm
Retraction speed: 100 mm/sec
Prime: no
Support infill: 15%
Support pattern: zig zag
Support angle: 50 degree
Dense support layer: 2
Dense Infill: 60%
Upper separation layer: 1 to 2 (or 0.20 mm)
Lower separation layer: 1 to 2 (or 0.20 mm)

Printing Notes

  1. Extrusion Temperature: 250 to 260C
  2. Print Bed Temperature: 110 to 120C
  3. If you are printing white at 250C, black will require ~5 degree more.
  4. Let print bed cool down to room temperature before removing your print.
  5. Must print with heated print bed.
  6. Works great on glass platform, PEI, blue tape, buildtak, and kapton tape.
  7. Adhesion solution: hair spray, ABS juice, and glue stick
  8. If wrapping occurs, print using raft.
  9. Enclosure improves print quality.
  10. First layer usually 5 to 10 C higher than subsequent layers.
  11. First layer usually print at 35mm/sec or slower.
  12. ABS absorbs heat and so benefits from additional active cooling.
  13. ABS adsorbs ~5% of moisture.  Un-used spool should store in container or plastic bag.
  14. Use Acetone to smooth out the print.
  15. Sand the print down with 300-grit sandpaper before acrylic painting.
  16. Longer life span compared to PLA.
  17. More flexible compared to PLA.
  18. Can also read article on how to print with BotFeeder ABS
Materials Quality

Material Grade: Chi Mei Polylac PA-747
Filament Diameter: 1.75mm or 2.90mm
Diameter Tolerance: +/- 0.03mm
Roundness Tolerance: +/- 0.05mm
Filament Weight: 1kg
Spool Length x Width: 190mm x 85mm
Spool Hole Diameter: 38mm
Spool Weight: 500g

BotFeeder Original ABS is Made to Perfection.

Raw Material

The premium ABS grade is selected based on providing engineering needs. All virgin ABS pellets are supplied by Chi Mei Corp. a globally well-known company manufactures polylac (ABS).

Natural Color Pigment

All color pigments are extracted from nature. NOT chemical engineered pigment.  During the process of 3D printing, you'll noticed a pleasant sweet scent in the air.

Filtration Treatment

Before production, all ABS pellets and color pigments undergo a filtration process to remove any larger particles that might clogged the nozzle during printing.

Anti-Moist Treatment

All raw materials have undergone dying treatment before production, as the practice of which prevents 'bubbles' occurrence during extrusion due to moisture content within the raw materials.

Coloring Masterbatch

Identical colors from spool to spool.

Diameter Control

An important machine in our production are the laser measurement systems used to check the diameter of our filament real time during production. It’s measured over 1000 times per second and helps us guarantee that each spool of BotFeeder 3d printing filament produced within tolerance. We can guarantee 0.03mm +/- on both 2.90mm and 1.75mm BotFeeder 3D Printer Filament, which means you can rest assured that your printer is extruding the exact amount of material.

Enhanced Spool Holder

In combination with a specially design spool and stronger material the BotFeeder spool is able to withstand the impact from dropping on the floor. From an in-house test, a typical 1kg spool of filament did not break/snap after 12 drops.

Vacuum Sealed Packaging

Within minutes of production a spool of BotFeeder 3d printing filament is wrapped with a protective film and then sealed airtight with a double barrier foil. To ensure minimal moisture, we upgraded to a large pack of desiccant.  To go the extra mile, we’ll also seal the fancy cardboard box that we use to ship our product. You can make sure BotFeeder 3d printing filament is fresh and ready for 3d printing when you’re done unboxing.

BotFeeder Filament Packaging

In-House Production

All BotFeeder 3D Printer Filaments are produced in our own production facility, situated in the Taiwan. Since no external parties are involved in the making of BotFeeder filament we can ensure consistent quality on every order.

In-House Testing

The BotFeeder Testlab features a wide range of popular 3D printers. We’re continuously testing on our 3D printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community. If your not sure how to print with our materials on your 3D printer, please contact us at

The following printers are used in our lab

  • Ultimaker Original
  • Ultimaker 2
  • Makerbot Replicator 2X
  • Lulzbot Mini
  • Original Pursa I3
  • Creality CR-10
  • Solidoodle 3
  • UFO Standard (Delta & E3D hot-end)
  • Rapidbot 2

Companies who are interested in having their 3D printer(s) featured in our testlab can contact us at


Storing Your Filament

Please note that improper storage may damage your filament. To maintain its original quality, it's strongly recommended that the filament be stored in the following conditions:

  • A dehumidifier cabinet or a dry and circulated area
  • Room temperature
  • Avoid direct sunlight or heat source

Selecting A Printer Location

Please note poor printer location will have a negative effect on your print result and possible of damaging your filament. To select the most ideal location for your printer, please follow this guide.

  • Consistent temperature
  • Stable air flow
  • Away from furniture for safety

Avoid Tangling Your Filament

When unpacking, changing filament or unloading, It is strongly suggested to get a good grip at the end of the filament at all times in order to prevent tangling. The spool holder is specifically designed with 2 holes of each side, allowing you to secure the end of the filament by threading into it. or you can simply 3D print a "Filament clip" that is attached to the spool holder itself.

BotFeeder PLA Colour Code & Filament Tracker

If Filament Gets Damp

Dry it slowly in room temperature. Please note that heat drying the filament will damages its quality by making it become brittle. The preferred method of drying your filament is to put in a dehumidifier cabinet or in an airtight bag with a few packs of desiccants. It's recommended to maintain a humidity level of 25% or less.


To take an extra step for your safety, BotFeeder 3D Printer Filaments are being tested on an annually basis by SGS. On top of that, all our filaments are manufactured in compliance of RoHS (Restriction of Hazardous Substances).  Why is it important?  It basically means the filaments are free from lead and other potentially hazardous substances including cadmium, mercury and chromium VI, among others.

SGS Certification

Material Science

BotFeeder was founded as a brand of Liing Shian Colorant Manufacturer which have been active in the masterbatch, and pigment & chemical auxiliaries for the plastics processing industry. Our knowhow, network and partnerships is driving material innovations and quality. You can expect BotFeeder to keep on developing interesting new materials, which will be tested on a variety of printers to make sure it’ll get the job done.

    Hot Items
    700g PLA Filament 1.75mm – Silky Pearl White
    700g PLA Filament 1.75mm – Metallic Copper
    1kg PLA Filament 1.75mm – Light Tan (Skin)
    1kg ABS Filament 1.75mm – Gray
    1kg PLA Filament 1.75mm – Caramel