Pre Order

.
Pre-order June/July 1kg PLA Filament 1.75mm – Piano White

Estimated Delivery: June to July 2021

All pre orders are final sale. No exchange or refund.


Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. PLA is made for one purpose: safety. There's nothing more important than your healthy.


  • Kids-friendly; low VOC
  • Easy to use
  • More brittle than ABS; stronger than PURE PLA
  • Smooth with sandpaper
  • Paints with acrylic
  • Compatible with most desktop 3D printers
  • Certified by SGS
  • Backed by our 15 days warranty

If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


Health Check

If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

  • Eye, nose and throat irritation
  • Headache, loss of concentration and nausea
  • Allergic skin reaction
  • Dizziness
    SETTINGS

    At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


    Our Recommendation Settings

    Extrusion temperature: 200 to 220 C
    Print bed temperature: 66 to 70 C (optional)
    Print speed: 30 to 90 mm/sec
    Layer thickness: 0.05 to 0.40 mm


    Access our full printing setting profile, and tricks & tips on printing PLA, check out: How to print with BotFeeder PLA?


    DELIVERY

    > View our full list of delivery rates to the USA and Canada.


    We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.


    For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


    For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.


    15 DAYS WARRANTY

    BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.


    > View more information

      $15.99 CAD
      Pre-order June/July 1kg PLA Filament 1.75mm – Jet Black

      Estimated Delivery: June to July 2021

      All pre orders are final sale. No exchange or refund.


      Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. PLA is made for one purpose: safety. There's nothing more important than your healthy.


      • Kids-friendly; low VOC
      • Easy to use
      • More brittle than ABS
      • Smooth with sandpaper
      • Paints with acrylic
      • Compatible with most desktop 3D printers
      • Certified by SGS
      • Backed by our 15 days warranty

      If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


      Health Check

      If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

      • Eye, nose and throat irritation
      • Headache, loss of concentration and nausea
      • Allergic skin reaction
      • Dizziness
        SETTINGS

        At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


        Our Recommendation Settings

        Extrusion temperature: 200 to 220 C
        Print bed temperature: 66 to 70 C (optional)
        Print speed: 30 to 90 mm/sec
        Layer thickness: 0.05 to 0.40 mm


        Access our full printing setting profile, and tricks & tips on printing PLA, check out: How to print with BotFeeder PLA?


        DELIVERY

        > View our full list of delivery rates to the USA and Canada.


        We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.


        For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


        For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.


        15 DAYS WARRANTY

        BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.


        > View more information

          $15.99 CAD
          Pre-order June/July 1kg PLA Filament 1.75mm – Gray

          Estimated Delivery: June to July 2021

          All pre orders are final sale. No exchange or refund.


          Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. PLA is made for one purpose: safety. There's nothing more important than your healthy.


          • Kids-friendly; low VOC
          • Easy to use
          • More brittle than ABS; stronger than PURE PLA
          • Smooth with sandpaper
          • Paints with acrylic
          • Compatible with most desktop 3D printers
          • Certified by SGS
          • Backed by our 15 days warranty

          If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


          Health Check

          If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

          • Eye, nose and throat irritation
          • Headache, loss of concentration and nausea
          • Allergic skin reaction
          • Dizziness
            SETTINGS

            At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


            Our Recommendation Settings

            Extrusion temperature: 200 to 220 C
            Print bed temperature: 66 to 70 C (optional)
            Print speed: 30 to 90 mm/sec
            Layer thickness: 0.05 to 0.40 mm


            Access our full printing setting profile, and tricks & tips on printing PLA, check out: How to print with BotFeeder PLA?


            DELIVERY

            > View our full list of delivery rates to the USA and Canada.


            We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.


            For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


            For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.


            15 DAYS WARRANTY

            BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.


            > View more information

              $15.99 CAD
              Pre-order June/July 1kg PLA Filament 1.75mm – Coke Red

              Estimated Delivery: June to July 2021

              All pre orders are final sale. No exchange or refund.


              Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. PLA is made for one purpose: safety. There's nothing more important than your healthy.


              • Kids-friendly; low VOC
              • Easy to use
              • More brittle than ABS
              • Smooth with sandpaper
              • Paints with acrylic
              • Compatible with most desktop 3D printers
              • Certified by SGS
              • Backed by our 15 days warranty

              If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


              Health Check

              If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

              • Eye, nose and throat irritation
              • Headache, loss of concentration and nausea
              • Allergic skin reaction
              • Dizziness
                SETTINGS

                At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                Our Recommendation Settings

                Extrusion temperature: 200 to 220 C
                Print bed temperature: 66 to 70 C (optional)
                Print speed: 30 to 90 mm/sec
                Layer thickness: 0.05 to 0.40 mm


                Access our full printing setting profile, and tricks & tips on printing PLA, check out: How to print with BotFeeder PLA?


                DELIVERY

                > View our full list of delivery rates to the USA and Canada.


                We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.


                For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.


                15 DAYS WARRANTY

                BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.


                > View more information

                  $15.99 CAD
                  Pre-order June/July 1kg PLA Filament 1.75mm – Sapphire

                  Estimated Delivery: June to July 2021

                  All pre orders are final sale. No exchange or refund.


                  Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.


                  • Kids-friendly; low VOC
                  • Easy to use
                  • More brittle than ABS
                  • Smooth with sandpaper
                  • Paints with acrylic
                  • Compatible with most desktop 3D printers
                  • Certified by SGS
                  • Backed by our 15 days warranty

                  If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                  Health Check

                  If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                  • Eye, nose and throat irritation
                  • Headache, loss of concentration and nausea
                  • Allergic skin reaction
                  • Dizziness
                    SETTINGS

                    At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                    Our Recommendation Settings

                    Extrusion temperature: 200 to 220 C
                    Print bed temperature: 66 to 70 C (optional)
                    Print speed: 30 to 90 mm/sec
                    Layer thickness: 0.05 to 0.40 mm


                    Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?


                    DELIVERY

                    > View our full list of delivery rates to the USA and Canada.


                    We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.


                    For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                    For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.


                    15 DAYS WARRANTY

                    BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.


                    > View more information

                      $15.99 CAD
                      Pre-order June/July 1kg PLA Filament 1.75mm – Macaron Pink

                      Estimated Delivery: June to July 2021

                      All pre orders are final sale. No exchange or refund.


                      Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.


                      • Kids-friendly; low VOC
                      • Easy to use
                      • More brittle than ABS
                      • Smooth with sandpaper
                      • Paints with acrylic
                      • Compatible with most desktop 3D printers
                      • Certified by SGS
                      • Backed by our 15 days warranty

                      If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                      Health Check

                      If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                      • Eye, nose and throat irritation
                      • Headache, loss of concentration and nausea
                      • Allergic skin reaction
                      • Dizziness
                        SETTINGS

                        At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                        Our Recommendation Settings

                        Extrusion temperature: 200 to 220 C
                        Print bed temperature: 66 to 70 C (optional)
                        Print speed: 30 to 90 mm/sec
                        Layer thickness: 0.05 to 0.40 mm


                        Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?


                        DELIVERY

                        > View our full list of delivery rates to the USA and Canada.


                        We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.


                        For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                        For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.


                        15 DAYS WARRANTY

                        BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.


                        > View more information

                          $15.99 CAD
                          Pre-order June/July 1kg PLA Filament 1.75mm – Lemon Yellow

                          Estimated Delivery: June to July 2021

                          All pre orders are final sale. No exchange or refund.


                          Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. PLA is made for one purpose: safety. There's nothing more important than your healthy.


                          • Kids-friendly; low VOC
                          • Easy to use
                          • More brittle than ABS; stronger than PURE PLA
                          • Smooth with sandpaper
                          • Paints with acrylic
                          • Compatible with most desktop 3D printers
                          • Certified by SGS
                          • Backed by our 15 days warranty

                          If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                          Health Check

                          If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                          • Eye, nose and throat irritation
                          • Headache, loss of concentration and nausea
                          • Allergic skin reaction
                          • Dizziness
                            SETTINGS

                            At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                            Our Recommendation Settings

                            Extrusion temperature: 200 to 220 C
                            Print bed temperature: 66 to 70 C (optional)
                            Print speed: 30 to 90 mm/sec
                            Layer thickness: 0.05 to 0.40 mm


                            Access our full printing setting profile, and tricks & tips on printing PLA, check out: How to print with BotFeeder PLA?


                            DELIVERY

                            > View our full list of delivery rates to the USA and Canada.


                            We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.


                            For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                            For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.


                            15 DAYS WARRANTY

                            BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.


                            > View more information

                              $15.99 CAD
                              Pre-order June/July 1kg PLA Filament 1.75mm – Jade

                              Estimated Delivery: June to July 2021

                              All pre orders are final sale. No exchange or refund.


                              Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. PLA is made for one purpose: safety. There's nothing more important than your healthy.


                              • Kids-friendly; low VOC
                              • Easy to use
                              • More brittle than ABS; stronger than PURE PLA
                              • Smooth with sandpaper
                              • Paints with acrylic
                              • Compatible with most desktop 3D printers
                              • Certified by SGS
                              • Backed by our 15 days warranty

                              If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                              Health Check

                              If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                              • Eye, nose and throat irritation
                              • Headache, loss of concentration and nausea
                              • Allergic skin reaction
                              • Dizziness
                                SETTINGS

                                At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                Our Recommendation Settings

                                Extrusion temperature: 200 to 220 C
                                Print bed temperature: 66 to 70 C (optional)
                                Print speed: 30 to 90 mm/sec
                                Layer thickness: 0.05 to 0.40 mm


                                Access our full printing setting profile, and tricks & tips on printing PLA, check out: How to print with BotFeeder PLA?


                                DELIVERY

                                > View our full list of delivery rates to the USA and Canada.


                                We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.


                                For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                                For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.


                                15 DAYS WARRANTY

                                BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.


                                > View more information

                                  $15.99 CAD
                                  Pre-order June/July 1kg PLA Filament 1.75mm – Sky Blue

                                  Estimated Delivery: June to July 2021

                                  All pre orders are final sale. No exchange or refund.


                                  Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.


                                  • Kids-friendly; low VOC
                                  • Easy to use
                                  • More brittle than ABS
                                  • Smooth with sandpaper
                                  • Paints with acrylic
                                  • Compatible with most desktop 3D printers
                                  • Certified by SGS
                                  • Backed by our 15 days warranty

                                  If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                                  Health Check

                                  If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                                  • Eye, nose and throat irritation
                                  • Headache, loss of concentration and nausea
                                  • Allergic skin reaction
                                  • Dizziness
                                    SETTINGS

                                    At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                    Our Recommendation Settings

                                    Extrusion temperature: 200 to 220 C
                                    Print bed temperature: 66 to 70 C (optional)
                                    Print speed: 30 to 90 mm/sec
                                    Layer thickness: 0.05 to 0.40 mm


                                    Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?


                                    DELIVERY

                                    > View our full list of delivery rates to the USA and Canada.


                                    We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.


                                    For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                                    For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.


                                    15 DAYS WARRANTY

                                    BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.


                                    > View more information

                                      $15.99 CAD
                                      Pre-order June/July 1kg PLA Filament 1.75mm – Turquoise

                                      Estimated Delivery: June to July 2021

                                      All pre orders are final sale. No exchange or refund.


                                      Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. PLA is made for one purpose: safety. There's nothing more important than your healthy.


                                      • Kids-friendly; low VOC
                                      • Easy to use
                                      • More brittle than ABS; stronger than PURE PLA
                                      • Smooth with sandpaper
                                      • Paints with acrylic
                                      • Compatible with most desktop 3D printers
                                      • Certified by SGS
                                      • Backed by our 15 days warranty

                                      If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                                      Health Check

                                      If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                                      • Eye, nose and throat irritation
                                      • Headache, loss of concentration and nausea
                                      • Allergic skin reaction
                                      • Dizziness
                                        SETTINGS

                                        At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                        Our Recommendation Settings

                                        Extrusion temperature: 200 to 220 C
                                        Print bed temperature: 66 to 70 C (optional)
                                        Print speed: 30 to 90 mm/sec
                                        Layer thickness: 0.05 to 0.40 mm


                                        Access our full printing setting profile, and tricks & tips on printing PLA, check out: How to print with BotFeeder PLA?


                                        DELIVERY

                                        > View our full list of delivery rates to the USA and Canada.


                                        We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.


                                        For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                                        For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.


                                        15 DAYS WARRANTY

                                        BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.


                                        > View more information

                                          $15.99 CAD
                                          Pre-order June/July 1kg neoPLA Filament 1.75mm - Jet Black

                                          Estimated Delivery: June to July 2021

                                          All pre orders are final sale. No exchange or refund.


                                          Are you having a hard time removing supports from a complex model? neoPLA is the solution for you. neoPLA makes it so much easier to remove support structures. Imagine the time you saved, you can spend them with your family.


                                          • Upgrade version of our Pure PLA
                                          • Easy to remove support structure even at high density
                                          • Improved strength comparable to ABS
                                          • Smooth with sandpaper
                                          • Paints with acrylic
                                          • Compatible with most desktop 3D printers
                                          • Certified by SGS
                                          • Backed by our 15 days warranty

                                          If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                                          Health Check

                                          If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                                          • Eye, nose and throat irritation
                                          • Headache, loss of concentration and nausea
                                          • Allergic skin reaction
                                          • Dizziness
                                            SETTINGS

                                            At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                            Our Recommendation Settings

                                            Extrusion temperature: 185 to 220 C
                                            Print bed temperature: 60 to 65 C (optional)
                                            Print speed: 30 to 90 mm/sec
                                            Layer thickness: 0.05 to 0.40 mm


                                            Access our full printing setting profile, and tricks & tips on printing neoPLA, check out: How to print with BotFeeder neoPLA?


                                            DELIVERY

                                            > View our full list of delivery rates to the USA and Canada.


                                            We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.


                                            For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                                            For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.


                                            15 DAYS WARRANTY

                                            BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.


                                            > View more information

                                              $31.99 CAD
                                              Pre-order June/July 1kg neoPLA Filament 1.75mm – Gray

                                              Estimated Delivery: June to July 2021

                                              All pre orders are final sale. No exchange or refund.


                                              Are you having a hard time removing supports from a complex model? neoPLA is the solution for you. neoPLA makes it so much easier to remove support structures. Imagine the time you saved, you can spend them with your family.


                                              • Upgrade version of our Pure PLA
                                              • Easy to remove support structure even at high density
                                              • Improved strength comparable to ABS
                                              • Smooth with sandpaper
                                              • Paints with acrylic
                                              • Compatible with most desktop 3D printers
                                              • Certified by SGS
                                              • Backed by our 15 days warranty

                                              If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                                              Health Check

                                              If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                                              • Eye, nose and throat irritation
                                              • Headache, loss of concentration and nausea
                                              • Allergic skin reaction
                                              • Dizziness
                                                SETTINGS

                                                At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                                Our Recommendation Settings

                                                Extrusion temperature: 185 to 220 C
                                                Print bed temperature: 60 to 65 C (optional)
                                                Print speed: 30 to 90 mm/sec
                                                Layer thickness: 0.05 to 0.40 mm


                                                Access our full printing setting profile, and tricks & tips on printing neoPLA, check out: How to print with BotFeeder neoPLA?


                                                DELIVERY

                                                > View our full list of delivery rates to the USA and Canada.


                                                We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.


                                                For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                                                For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.


                                                15 DAYS WARRANTY

                                                BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.


                                                > View more information

                                                  $31.99 CAD
                                                  Pre-order June/July 1kg neoPLA Filament 1.75mm – Piano White

                                                  Estimated Delivery: June to July 2021

                                                  All pre orders are final sale. No exchange or refund.


                                                  Are you having a hard time removing supports from a complex model? neoPLA is the solution for you. neoPLA makes it so much easier to remove support structures. Imagine the time you saved, you can spend them with your family.


                                                  • Upgrade version of our Pure PLA
                                                  • Easy to remove support structure even at high density
                                                  • Improved strength comparable to ABS
                                                  • Smooth with sandpaper
                                                  • Paints with acrylic
                                                  • Compatible with most desktop 3D printers
                                                  • Certified by SGS
                                                  • Backed by our 15 days warranty

                                                  If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                                                  Health Check

                                                  If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                                                  • Eye, nose and throat irritation
                                                  • Headache, loss of concentration and nausea
                                                  • Allergic skin reaction
                                                  • Dizziness
                                                    SETTINGS

                                                    At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                                    Our Recommendation Settings

                                                    Extrusion temperature: 185 to 220 C
                                                    Print bed temperature: 60 to 65 C (optional)
                                                    Print speed: 30 to 90 mm/sec
                                                    Layer thickness: 0.05 to 0.40 mm


                                                    Access our full printing setting profile, and tricks & tips on printing neoPLA, check out: How to print with BotFeeder neoPLA?


                                                    DELIVERY

                                                    > View our full list of delivery rates to the USA and Canada.


                                                    We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.


                                                    For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                                                    For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.


                                                    15 DAYS WARRANTY

                                                    BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.


                                                    > View more information

                                                      $31.99 CAD