

PURE PLA is a 100% renewable, biodegradable 3D printing material that is easier on the environment. It has a quick transition from molten to solid, enabling it to provide more detail than other plastics.
Our PURE PLA, or Polylactic Acid, is among the most popular 3D printing materials in the world because it is easy to print and strong. PURE PLA is a hard plastic that produces a barely noticeable, but quite pleasant, sugary smell when extruding.
Our PURE PLA is made from 100% Virgin NatureWorks™ Ingeo PLA.
Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.
- Kids-friendly; low VOC
- Easy to use
- More brittle than ABS
- Smooth with sandpaper
- Paints with acrylic
- Compatible with most desktop 3D printers
- Certified by SGS
- Backed by our 15 days warranty
If you're interested in maintaining your filaments in top condition, check out our Filament Care page.
Health Check
If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".
- Eye, nose and throat irritation
- Headache, loss of concentration and nausea
- Allergic skin reaction
- Dizziness
SETTINGS
At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.
Our Recommendation Settings
Extrusion temperature: 200 to 220 C
Print bed temperature: 66 to 70 C (optional)
Print speed: 30 to 90 mm/sec
Layer thickness: 0.05 to 0.40 mm
Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?
DELIVERY
> View our full list of delivery rates to the USA and Canada.
We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.
For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.
For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.
15 DAYS WARRANTY
BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.
Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.
- Kids-friendly; low VOC
- Easy to use
- More brittle than ABS
- Smooth with sandpaper
- Paints with acrylic
- Compatible with most desktop 3D printers
- Certified by SGS
- Backed by our 15 days warranty
If you're interested in maintaining your filaments in top condition, check out our Filament Care page.
Health Check
If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".
- Eye, nose and throat irritation
- Headache, loss of concentration and nausea
- Allergic skin reaction
- Dizziness
SETTINGS
At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.
Our Recommendation Settings
Extrusion temperature: 200 to 220 C
Print bed temperature: 66 to 70 C (optional)
Print speed: 30 to 90 mm/sec
Layer thickness: 0.05 to 0.40 mm
Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?
DELIVERY
> View our full list of delivery rates to the USA and Canada.
We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.
For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.
For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.
15 DAYS WARRANTY
BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.
Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.
- Kids-friendly; low VOC
- Easy to use
- More brittle than ABS
- Smooth with sandpaper
- Paints with acrylic
- Compatible with most desktop 3D printers
- Certified by SGS
- Backed by our 15 days warranty
If you're interested in maintaining your filaments in top condition, check out our Filament Care page.
Health Check
If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".
- Eye, nose and throat irritation
- Headache, loss of concentration and nausea
- Allergic skin reaction
- Dizziness
SETTINGS
At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.
Our Recommendation Settings
Extrusion temperature: 200 to 220 C
Print bed temperature: 66 to 70 C (optional)
Print speed: 30 to 90 mm/sec
Layer thickness: 0.05 to 0.40 mm
Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?
DELIVERY
> View our full list of delivery rates to the USA and Canada.
We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.
For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.
For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.
15 DAYS WARRANTY
BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.
Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.
- Kids-friendly; low VOC
- Easy to use
- More brittle than ABS
- Smooth with sandpaper
- Paints with acrylic
- Compatible with most desktop 3D printers
- Certified by SGS
- Backed by our 15 days warranty
If you're interested in maintaining your filaments in top condition, check out our Filament Care page.
Health Check
If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".
- Eye, nose and throat irritation
- Headache, loss of concentration and nausea
- Allergic skin reaction
- Dizziness
SETTINGS
At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.
Our Recommendation Settings
Extrusion temperature: 200 to 220 C
Print bed temperature: 66 to 70 C (optional)
Print speed: 30 to 90 mm/sec
Layer thickness: 0.05 to 0.40 mm
Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?
DELIVERY
> View our full list of delivery rates to the USA and Canada.
We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.
For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.
For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.
15 DAYS WARRANTY
BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.
Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.
- Kids-friendly; low VOC
- Easy to use
- More brittle than ABS
- Smooth with sandpaper
- Paints with acrylic
- Compatible with most desktop 3D printers
- Certified by SGS
- Backed by our 15 days warranty
If you're interested in maintaining your filaments in top condition, check out our Filament Care page.
Health Check
If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".
- Eye, nose and throat irritation
- Headache, loss of concentration and nausea
- Allergic skin reaction
- Dizziness
SETTINGS
At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.
Our Recommendation Settings
Extrusion temperature: 200 to 220 C
Print bed temperature: 66 to 70 C (optional)
Print speed: 30 to 90 mm/sec
Layer thickness: 0.05 to 0.40 mm
Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?
DELIVERY
> View our full list of delivery rates to the USA and Canada.
We usually dispatch orders sam day or the next working day. Delivery time vary based on selected service and destination.
For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.
For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.
15 DAYS WARRANTY
BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.
Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.
- Kids-friendly; low VOC
- Easy to use
- More brittle than ABS
- Smooth with sandpaper
- Paints with acrylic
- Compatible with most desktop 3D printers
- Certified by SGS
- Backed by our 15 days warranty
If you're interested in maintaining your filaments in top condition, check out our Filament Care page.
Health Check
If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".
- Eye, nose and throat irritation
- Headache, loss of concentration and nausea
- Allergic skin reaction
- Dizziness
SETTINGS
At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.
Our Recommendation Settings
Extrusion temperature: 200 to 220 C
Print bed temperature: 66 to 70 C (optional)
Print speed: 30 to 90 mm/sec
Layer thickness: 0.05 to 0.40 mm
Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?
DELIVERY
> View our full list of delivery rates to the USA and Canada.
We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.
For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.
For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.
15 DAYS WARRANTY
BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.
Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.
- Kids-friendly; low VOC
- Easy to use
- More brittle than ABS
- Smooth with sandpaper
- Paints with acrylic
- Compatible with most desktop 3D printers
- Certified by SGS
- Backed by our 15 days warranty
If you're interested in maintaining your filaments in top condition, check out our Filament Care page.
Health Check
If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".
- Eye, nose and throat irritation
- Headache, loss of concentration and nausea
- Allergic skin reaction
- Dizziness
SETTINGS
At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.
Our Recommendation Settings
Extrusion temperature: 200 to 220 C
Print bed temperature: 66 to 70 C (optional)
Print speed: 30 to 90 mm/sec
Layer thickness: 0.05 to 0.40 mm
Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?
DELIVERY
> View our full list of delivery rates to the USA and Canada.
We usually dispatch orders sam day or the next working day. Delivery time vary based on selected service and destination.
For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.
For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.
15 DAYS WARRANTY
BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.
Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.
- Kids-friendly; low VOC
- Easy to use
- More brittle than ABS
- Smooth with sandpaper
- Paints with acrylic
- Compatible with most desktop 3D printers
- Certified by SGS
- Backed by our 15 days warranty
If you're interested in maintaining your filaments in top condition, check out our Filament Care page.
Health Check
If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".
- Eye, nose and throat irritation
- Headache, loss of concentration and nausea
- Allergic skin reaction
- Dizziness
SETTINGS
At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.
Our Recommendation Settings
Extrusion temperature: 200 to 220 C
Print bed temperature: 66 to 70 C (optional)
Print speed: 30 to 90 mm/sec
Layer thickness: 0.05 to 0.40 mm
Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?
DELIVERY
> View our full list of delivery rates to the USA and Canada.
We usually dispatch orders sam day or the next working day. Delivery time vary based on selected service and destination.
For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.
For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.
15 DAYS WARRANTY
BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.
Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.
- Kids-friendly; low VOC
- Easy to use
- More brittle than ABS
- Smooth with sandpaper
- Paints with acrylic
- Compatible with most desktop 3D printers
- Certified by SGS
- Backed by our 15 days warranty
If you're interested in maintaining your filaments in top condition, check out our Filament Care page.
Health Check
If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".
- Eye, nose and throat irritation
- Headache, loss of concentration and nausea
- Allergic skin reaction
- Dizziness
SETTINGS
At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.
Our Recommendation Settings
Extrusion temperature: 200 to 220 C
Print bed temperature: 66 to 70 C (optional)
Print speed: 30 to 90 mm/sec
Layer thickness: 0.05 to 0.40 mm
Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?
DELIVERY
> View our full list of delivery rates to the USA and Canada.
We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.
For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.
For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.
15 DAYS WARRANTY
BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.
Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.
- Kids-friendly; low VOC
- Easy to use
- More brittle than ABS
- Smooth with sandpaper
- Paints with acrylic
- Compatible with most desktop 3D printers
- Certified by SGS
- Backed by our 15 days warranty
If you're interested in maintaining your filaments in top condition, check out our Filament Care page.
Health Check
If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".
- Eye, nose and throat irritation
- Headache, loss of concentration and nausea
- Allergic skin reaction
- Dizziness
SETTINGS
At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.
Our Recommendation Settings
Extrusion temperature: 200 to 220 C
Print bed temperature: 66 to 70 C (optional)
Print speed: 30 to 90 mm/sec
Layer thickness: 0.05 to 0.40 mm
Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?
DELIVERY
> View our full list of delivery rates to the USA and Canada.
We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.
For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.
For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.
15 DAYS WARRANTY
BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.
Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.
- Kids-friendly; low VOC
- Easy to use
- More brittle than ABS
- Smooth with sandpaper
- Paints with acrylic
- Compatible with most desktop 3D printers
- Certified by SGS
- Backed by our 15 days warranty
If you're interested in maintaining your filaments in top condition, check out our Filament Care page.
Health Check
If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".
- Eye, nose and throat irritation
- Headache, loss of concentration and nausea
- Allergic skin reaction
- Dizziness
SETTINGS
At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.
Our Recommendation Settings
Extrusion temperature: 200 to 220 C
Print bed temperature: 66 to 70 C (optional)
Print speed: 30 to 90 mm/sec
Layer thickness: 0.05 to 0.40 mm
Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?
DELIVERY
> View our full list of delivery rates to the USA and Canada.
We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.
For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.
For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.
15 DAYS WARRANTY
BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.
Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.
- Kids-friendly; low VOC
- Easy to use
- More brittle than ABS
- Smooth with sandpaper
- Paints with acrylic
- Compatible with most desktop 3D printers
- Certified by SGS
- Backed by our 15 days warranty
If you're interested in maintaining your filaments in top condition, check out our Filament Care page.
Health Check
If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".
- Eye, nose and throat irritation
- Headache, loss of concentration and nausea
- Allergic skin reaction
- Dizziness
SETTINGS
At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.
Our Recommendation Settings
Extrusion temperature: 200 to 220 C
Print bed temperature: 66 to 70 C (optional)
Print speed: 30 to 90 mm/sec
Layer thickness: 0.05 to 0.40 mm
Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?
DELIVERY
> View our full list of delivery rates to the USA and Canada.
We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.
For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.
For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.
15 DAYS WARRANTY
BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.
Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.
- Kids-friendly; low VOC
- Easy to use
- More brittle than ABS
- Smooth with sandpaper
- Paints with acrylic
- Compatible with most desktop 3D printers
- Certified by SGS
- Backed by our 15 days warranty
If you're interested in maintaining your filaments in top condition, check out our Filament Care page.
Health Check
If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".
- Eye, nose and throat irritation
- Headache, loss of concentration and nausea
- Allergic skin reaction
- Dizziness
SETTINGS
At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.
Our Recommendation Settings
Extrusion temperature: 200 to 220 C
Print bed temperature: 66 to 70 C (optional)
Print speed: 30 to 90 mm/sec
Layer thickness: 0.05 to 0.40 mm
Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?
DELIVERY
> View our full list of delivery rates to the USA and Canada.
We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.
For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.
For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.
15 DAYS WARRANTY
BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.
Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.
- Kids-friendly; low VOC
- Easy to use
- More brittle than ABS
- Smooth with sandpaper
- Paints with acrylic
- Compatible with most desktop 3D printers
- Certified by SGS
- Backed by our 15 days warranty
If you're interested in maintaining your filaments in top condition, check out our Filament Care page.
Health Check
If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".
- Eye, nose and throat irritation
- Headache, loss of concentration and nausea
- Allergic skin reaction
- Dizziness
SETTINGS
At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.
Our Recommendation Settings
Extrusion temperature: 200 to 220 C
Print bed temperature: 66 to 70 C (optional)
Print speed: 30 to 90 mm/sec
Layer thickness: 0.05 to 0.40 mm
Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?
DELIVERY
> View our full list of delivery rates to the USA and Canada.
We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.
For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.
For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.
15 DAYS WARRANTY
BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.
Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.
- Kids-friendly; low VOC
- Easy to use
- More brittle than ABS
- Smooth with sandpaper
- Paints with acrylic
- Compatible with most desktop 3D printers
- Certified by SGS
- Backed by our 15 days warranty
If you're interested in maintaining your filaments in top condition, check out our Filament Care page.
Health Check
If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".
- Eye, nose and throat irritation
- Headache, loss of concentration and nausea
- Allergic skin reaction
- Dizziness
SETTINGS
At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.
Our Recommendation Settings
Extrusion temperature: 200 to 220 C
Print bed temperature: 66 to 70 C (optional)
Print speed: 30 to 90 mm/sec
Layer thickness: 0.05 to 0.40 mm
Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?
DELIVERY
> View our full list of delivery rates to the USA and Canada.
We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.
For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.
For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.
15 DAYS WARRANTY
BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.
Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.
- Kids-friendly; low VOC
- Easy to use
- More brittle than ABS
- Smooth with sandpaper
- Paints with acrylic
- Compatible with most desktop 3D printers
- Certified by SGS
- Backed by our 15 days warranty
If you're interested in maintaining your filaments in top condition, check out our Filament Care page.
Health Check
If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".
- Eye, nose and throat irritation
- Headache, loss of concentration and nausea
- Allergic skin reaction
- Dizziness
SETTINGS
At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.
Our Recommendation Settings
Extrusion temperature: 200 to 220 C
Print bed temperature: 66 to 70 C (optional)
Print speed: 30 to 90 mm/sec
Layer thickness: 0.05 to 0.40 mm
Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?
DELIVERY
> View our full list of delivery rates to the USA and Canada.
We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.
For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.
For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.
15 DAYS WARRANTY
BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.
Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.
- Kids-friendly; low VOC
- Easy to use
- More brittle than ABS
- Smooth with sandpaper
- Paints with acrylic
- Compatible with most desktop 3D printers
- Certified by SGS
- Backed by our 15 days warranty
If you're interested in maintaining your filaments in top condition, check out our Filament Care page.
Health Check
If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".
- Eye, nose and throat irritation
- Headache, loss of concentration and nausea
- Allergic skin reaction
- Dizziness
SETTINGS
At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.
Our Recommendation Settings
Extrusion temperature: 200 to 220 C
Print bed temperature: 66 to 70 C (optional)
Print speed: 30 to 90 mm/sec
Layer thickness: 0.05 to 0.40 mm
Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?
DELIVERY
> View our full list of delivery rates to the USA and Canada.
We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.
For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.
For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.
15 DAYS WARRANTY
BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.
Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.
- Kids-friendly; low VOC
- Easy to use
- More brittle than ABS
- Smooth with sandpaper
- Paints with acrylic
- Compatible with most desktop 3D printers
- Certified by SGS
- Backed by our 15 days warranty
If you're interested in maintaining your filaments in top condition, check out our Filament Care page.
Health Check
If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".
- Eye, nose and throat irritation
- Headache, loss of concentration and nausea
- Allergic skin reaction
- Dizziness
SETTINGS
At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.
Our Recommendation Settings
Extrusion temperature: 200 to 220 C
Print bed temperature: 66 to 70 C (optional)
Print speed: 30 to 90 mm/sec
Layer thickness: 0.05 to 0.40 mm
Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?
DELIVERY
> View our full list of delivery rates to the USA and Canada.
We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.
For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.
For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.
15 DAYS WARRANTY
BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.
Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.
- Kids-friendly; low VOC
- Easy to use
- More brittle than ABS
- Smooth with sandpaper
- Paints with acrylic
- Compatible with most desktop 3D printers
- Certified by SGS
- Backed by our 15 days warranty
If you're interested in maintaining your filaments in top condition, check out our Filament Care page.
Health Check
If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".
- Eye, nose and throat irritation
- Headache, loss of concentration and nausea
- Allergic skin reaction
- Dizziness
SETTINGS
At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.
Our Recommendation Settings
Extrusion temperature: 200 to 220 C
Print bed temperature: 66 to 70 C (optional)
Print speed: 30 to 90 mm/sec
Layer thickness: 0.05 to 0.40 mm
Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?
DELIVERY
> View our full list of delivery rates to the USA and Canada.
We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.
For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.
For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.
15 DAYS WARRANTY
BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.
Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.
- Kids-friendly; low VOC
- Easy to use
- More brittle than ABS
- Smooth with sandpaper
- Paints with acrylic
- Compatible with most desktop 3D printers
- Certified by SGS
- Backed by our 15 days warranty
If you're interested in maintaining your filaments in top condition, check out our Filament Care page.
Health Check
If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".
- Eye, nose and throat irritation
- Headache, loss of concentration and nausea
- Allergic skin reaction
- Dizziness
SETTINGS
At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.
Our Recommendation Settings
Extrusion temperature: 200 to 220 C
Print bed temperature: 66 to 70 C (optional)
Print speed: 30 to 90 mm/sec
Layer thickness: 0.05 to 0.40 mm
Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?
DELIVERY
> View our full list of delivery rates to the USA and Canada.
We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.
For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.
For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.
15 DAYS WARRANTY
BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.
Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.
- Kids-friendly; low VOC
- Easy to use
- More brittle than ABS
- Smooth with sandpaper
- Paints with acrylic
- Compatible with most desktop 3D printers
- Certified by SGS
- Backed by our 15 days warranty
If you're interested in maintaining your filaments in top condition, check out our Filament Care page.
Health Check
If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".
- Eye, nose and throat irritation
- Headache, loss of concentration and nausea
- Allergic skin reaction
- Dizziness
SETTINGS
At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.
Our Recommendation Settings
Extrusion temperature: 200 to 220 C
Print bed temperature: 66 to 70 C (optional)
Print speed: 30 to 90 mm/sec
Layer thickness: 0.05 to 0.40 mm
Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?
DELIVERY
> View our full list of delivery rates to the USA and Canada.
We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.
For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.
For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.
15 DAYS WARRANTY
BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.