neoPLA

neoPLA is a 100% renewable, biodegradable 3D printing material that is easier on the environment. It has a quick transition from molten to solid, enabling it to provide more detail than other plastics.

Our neoPLA, or Polylactic Acid, is among the most popular 3D printing materials in the world because it is easy to print and strong. neoPLA is a hard plastic that produces a barely noticeable, but quite pleasant, sugary smell when extruding.

Major advantages compared with other PLAs.

1) Easy removal of supports

2) Better surface finishing

3) Stronger PLA

Our neoPLA is made from 100% Virgin NatureWorks™ Ingeo PLA.


Are you having a hard time removing supports from a complex model? neoPLA is the solution for you. neoPLA makes it so much easier to remove support structures. Imagine the time you saved, you can spend them with your family.


  • Upgrade version of our Pure PLA
  • Easy to remove support structure even at high density
  • Improved strength comparable to ABS
  • Smooth with sandpaper
  • Paints with acrylic
  • Compatible with most desktop 3D printers
  • Certified by SGS
  • Backed by our 60 days warranty

If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


Health Check

If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

  • Eye, nose and throat irritation
  • Headache, loss of concentration and nausea
  • Allergic skin reaction
  • Dizziness
    SETTINGS

    At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


    Our Recommendation Settings

    Extrusion temperature: 185 to 220 C
    Print bed temperature: 60 to 65 C (optional)
    Print speed: 30 to 90 mm/sec
    Layer thickness: 0.05 to 0.40 mm


    Access our full printing setting profile, and tricks & tips on printing neoPLA, check out: How to print with BotFeeder neoPLA?


    DELIVERY

    > View our full list of delivery rates to the USA and Canada.


    We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


    For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


    For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


    60 DAYS WARRANTY

    BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


    > View more information

      Sold Out

      Are you having a hard time removing supports from a complex model? neoPLA is the solution for you. neoPLA makes it so much easier to remove support structures. Imagine the time you saved, you can spend them with your family.


      • Upgrade version of our Pure PLA
      • Easy to remove support structure even at high density
      • Improved strength comparable to ABS
      • Smooth with sandpaper
      • Paints with acrylic
      • Compatible with most desktop 3D printers
      • Certified by SGS
      • Backed by our 60 days warranty

      If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


      Health Check

      If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

      • Eye, nose and throat irritation
      • Headache, loss of concentration and nausea
      • Allergic skin reaction
      • Dizziness
        SETTINGS

        At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


        Our Recommendation Settings

        Extrusion temperature: 185 to 220 C
        Print bed temperature: 60 to 65 C (optional)
        Print speed: 30 to 90 mm/sec
        Layer thickness: 0.05 to 0.40 mm


        Access our full printing setting profile, and tricks & tips on printing neoPLA, check out: How to print with BotFeeder neoPLA?


        DELIVERY

        > View our full list of delivery rates to the USA and Canada.


        We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


        For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


        For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


        60 DAYS WARRANTY

        BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


        > View more information

          Sold Out

          Are you having a hard time removing supports from a complex model? neoPLA is the solution for you. neoPLA makes it so much easier to remove support structures. Imagine the time you saved, you can spend them with your family.


          • Upgrade version of our Pure PLA
          • Easy to remove support structure even at high density
          • Improved strength comparable to ABS
          • Smooth with sandpaper
          • Paints with acrylic
          • Compatible with most desktop 3D printers
          • Certified by SGS
          • Backed by our 60 days warranty

          If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


          Health Check

          If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

          • Eye, nose and throat irritation
          • Headache, loss of concentration and nausea
          • Allergic skin reaction
          • Dizziness
            SETTINGS

            At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


            Our Recommendation Settings

            Extrusion temperature: 185 to 220 C
            Print bed temperature: 60 to 65 C (optional)
            Print speed: 30 to 90 mm/sec
            Layer thickness: 0.05 to 0.40 mm


            Access our full printing setting profile, and tricks & tips on printing neoPLA, check out: How to print with BotFeeder neoPLA?


            DELIVERY

            > View our full list of delivery rates to the USA and Canada.


            We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


            For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


            For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


            60 DAYS WARRANTY

            BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


            > View more information

              Sold Out

              Are you having a hard time removing supports from a complex model? neoPLA is the solution for you. neoPLA makes it so much easier to remove support structures. Imagine the time you saved, you can spend them with your family.


              • Upgrade version of our Pure PLA
              • Easy to remove support structure even at high density
              • Improved strength comparable to ABS
              • Smooth with sandpaper
              • Paints with acrylic
              • Compatible with most desktop 3D printers
              • Certified by SGS
              • Backed by our 60 days warranty

              If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


              Health Check

              If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

              • Eye, nose and throat irritation
              • Headache, loss of concentration and nausea
              • Allergic skin reaction
              • Dizziness
                SETTINGS

                At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                Our Recommendation Settings

                Extrusion temperature: 185 to 220 C
                Print bed temperature: 60 to 65 C (optional)
                Print speed: 30 to 90 mm/sec
                Layer thickness: 0.05 to 0.40 mm


                Access our full printing setting profile, and tricks & tips on printing neoPLA, check out: How to print with BotFeeder neoPLA?


                DELIVERY

                > View our full list of delivery rates to the USA and Canada.


                We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                60 DAYS WARRANTY

                BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                > View more information

                  Sold Out

                  Are you having a hard time removing supports from a complex model? neoPLA is the solution for you. neoPLA makes it so much easier to remove support structures. Imagine the time you saved, you can spend them with your family.


                  • Upgrade version of our Pure PLA
                  • Easy to remove support structure even at high density
                  • Improved strength comparable to ABS
                  • Smooth with sandpaper
                  • Paints with acrylic
                  • Compatible with most desktop 3D printers
                  • Certified by SGS
                  • Backed by our 60 days warranty

                  If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                  Health Check

                  If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                  • Eye, nose and throat irritation
                  • Headache, loss of concentration and nausea
                  • Allergic skin reaction
                  • Dizziness
                    SETTINGS

                    At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                    Our Recommendation Settings

                    Extrusion temperature: 185 to 220 C
                    Print bed temperature: 60 to 65 C (optional)
                    Print speed: 30 to 90 mm/sec
                    Layer thickness: 0.05 to 0.40 mm


                    Access our full printing setting profile, and tricks & tips on printing neoPLA, check out: How to print with BotFeeder neoPLA?


                    DELIVERY

                    > View our full list of delivery rates to the USA and Canada.


                    We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                    For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                    For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                    60 DAYS WARRANTY

                    BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                    > View more information

                      Sold Out

                      Are you having a hard time removing supports from a complex model? neoPLA is the solution for you. neoPLA makes it so much easier to remove support structures. Imagine the time you saved, you can spend them with your family.


                      • Upgrade version of our Pure PLA
                      • Easy to remove support structure even at high density
                      • Improved strength comparable to ABS
                      • Smooth with sandpaper
                      • Paints with acrylic
                      • Compatible with most desktop 3D printers
                      • Certified by SGS
                      • Backed by our 60 days warranty

                      If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                      Health Check

                      If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                      • Eye, nose and throat irritation
                      • Headache, loss of concentration and nausea
                      • Allergic skin reaction
                      • Dizziness
                        SETTINGS

                        At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                        Our Recommendation Settings

                        Extrusion temperature: 185 to 220 C
                        Print bed temperature: 60 to 65 C (optional)
                        Print speed: 30 to 90 mm/sec
                        Layer thickness: 0.05 to 0.40 mm


                        Access our full printing setting profile, and tricks & tips on printing neoPLA, check out: How to print with BotFeeder neoPLA?


                        DELIVERY

                        > View our full list of delivery rates to the USA and Canada.


                        We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                        For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                        For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                        60 DAYS WARRANTY

                        BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                        > View more information

                          Sold Out

                          Are you having a hard time removing supports from a complex model? neoPLA is the solution for you. neoPLA makes it so much easier to remove support structures. Imagine the time you saved, you can spend them with your family.


                          • Upgrade version of our Pure PLA
                          • Easy to remove support structure even at high density
                          • Improved strength comparable to ABS
                          • Smooth with sandpaper
                          • Paints with acrylic
                          • Compatible with most desktop 3D printers
                          • Certified by SGS
                          • Backed by our 60 days warranty

                          If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                          Health Check

                          If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                          • Eye, nose and throat irritation
                          • Headache, loss of concentration and nausea
                          • Allergic skin reaction
                          • Dizziness
                            SETTINGS

                            At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                            Our Recommendation Settings

                            Extrusion temperature: 185 to 220 C
                            Print bed temperature: 60 to 65 C (optional)
                            Print speed: 30 to 90 mm/sec
                            Layer thickness: 0.05 to 0.40 mm


                            Access our full printing setting profile, and tricks & tips on printing neoPLA, check out: How to print with BotFeeder neoPLA?


                            DELIVERY

                            > View our full list of delivery rates to the USA and Canada.


                            We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                            For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                            For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                            60 DAYS WARRANTY

                            BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                            > View more information

                              Sold Out

                              Are you having a hard time removing supports from a complex model? neoPLA is the solution for you. neoPLA makes it so much easier to remove support structures. Imagine the time you saved, you can spend them with your family.


                              • Upgrade version of our Pure PLA
                              • Easy to remove support structure even at high density
                              • Improved strength comparable to ABS
                              • Smooth with sandpaper
                              • Paints with acrylic
                              • Compatible with most desktop 3D printers
                              • Certified by SGS
                              • Backed by our 60 days warranty

                              If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                              Health Check

                              If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                              • Eye, nose and throat irritation
                              • Headache, loss of concentration and nausea
                              • Allergic skin reaction
                              • Dizziness
                                SETTINGS

                                At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                Our Recommendation Settings

                                Extrusion temperature: 185 to 220 C
                                Print bed temperature: 60 to 65 C (optional)
                                Print speed: 30 to 90 mm/sec
                                Layer thickness: 0.05 to 0.40 mm


                                Access our full printing setting profile, and tricks & tips on printing neoPLA, check out: How to print with BotFeeder neoPLA?


                                DELIVERY

                                > View our full list of delivery rates to the USA and Canada.


                                We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                                For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                                For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                                60 DAYS WARRANTY

                                BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                                > View more information

                                  Sold Out

                                  Are you having a hard time removing supports from a complex model? neoPLA is the solution for you. neoPLA makes it so much easier to remove support structures. Imagine the time you saved, you can spend them with your family.


                                  • Upgrade version of our Pure PLA
                                  • Easy to remove support structure even at high density
                                  • Improved strength comparable to ABS
                                  • Smooth with sandpaper
                                  • Paints with acrylic
                                  • Compatible with most desktop 3D printers
                                  • Certified by SGS
                                  • Backed by our 60 days warranty

                                  If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                                  Health Check

                                  If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                                  • Eye, nose and throat irritation
                                  • Headache, loss of concentration and nausea
                                  • Allergic skin reaction
                                  • Dizziness
                                    SETTINGS

                                    At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                    Our Recommendation Settings

                                    Extrusion temperature: 185 to 220 C
                                    Print bed temperature: 60 to 65 C (optional)
                                    Print speed: 30 to 90 mm/sec
                                    Layer thickness: 0.05 to 0.40 mm


                                    Access our full printing setting profile, and tricks & tips on printing neoPLA, check out: How to print with BotFeeder neoPLA?


                                    DELIVERY

                                    > View our full list of delivery rates to the USA and Canada.


                                    We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                                    For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                                    For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                                    60 DAYS WARRANTY

                                    BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                                    > View more information

                                      Sold Out

                                      Are you having a hard time removing supports from a complex model? neoPLA is the solution for you. neoPLA makes it so much easier to remove support structures. Imagine the time you saved, you can spend them with your family.


                                      • Upgrade version of our Pure PLA
                                      • Easy to remove support structure even at high density
                                      • Improved strength comparable to ABS
                                      • Smooth with sandpaper
                                      • Paints with acrylic
                                      • Compatible with most desktop 3D printers
                                      • Certified by SGS
                                      • Backed by our 60 days warranty

                                      If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                                      Health Check

                                      If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                                      • Eye, nose and throat irritation
                                      • Headache, loss of concentration and nausea
                                      • Allergic skin reaction
                                      • Dizziness
                                        SETTINGS

                                        At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                        Our Recommendation Settings

                                        Extrusion temperature: 185 to 220 C
                                        Print bed temperature: 60 to 65 C (optional)
                                        Print speed: 30 to 90 mm/sec
                                        Layer thickness: 0.05 to 0.40 mm


                                        Access our full printing setting profile, and tricks & tips on printing neoPLA, check out: How to print with BotFeeder neoPLA?


                                        DELIVERY

                                        > View our full list of delivery rates to the USA and Canada.


                                        We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                                        For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                                        For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                                        60 DAYS WARRANTY

                                        BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                                        > View more information

                                          Sold Out
                                          Items 1 to 10 of 10 total
                                          Compatibility Compatible with most 3D printers. Our testlab includes Ulitmaker, Creality, Pursa, MakerBot, and more.
                                          100% Satisfaction All BotFeeder Filaments are made with highest quality standard to bring you the most satisfaction.
                                          60 Days Money Back To prove our confidence in the products we provide and their value to you, we are offering a 60-day, money-back guarantee.
                                          Free Shipping To Canada or USA, we provide free express shipping to any order on and over CAD$85.
                                          Need Help? If you have any question, contact our filament specialist team here.