Hot Items

700g PLA Filament 1.75mm – Silky Pearl White

BotFeeder Original PLA Filament

Kids Friendly
Minimized VOC Emissions
0 Toxic Additive Added
~100% PLA
Compatible with most 3D printers on the market


Health Check

If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

  • Eye, nose and throat irritation
  • Headache, loss of concentration and nausea
  • Allergic skin reaction
  • Dizziness
    Temp. & Tips

    At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


    Our Setting Profile

    3D printer type: delta
    Nozzle size: 0.30 mm
    Resolution: 0.10 mm
    Extrusion temperature: 200 C
    Print bed temperature: 65 C
    Print speed: 65 mm/sec (default speed)
    Adhesion type: brim
    Retraction distance: 4.5 mm
    Retraction speed: 100 mm/sec
    Prime: no
    Support infill: 15%
    Support pattern: zig zag
    Support angle: 50 degree
    Dense support layer: 2
    Dense Infill: 60%
    Upper separation layer: 1 to 2 (or 0.20 mm)
    Lower separation layer: 1 to 2 (or 0.20 mm)


    Printing Notes

    1. Extrusion Temperature: 200 to 220C
    2. Print Bed Temperature: 60 to 70C (optional)
    3. If you are printing white at 200C, black will require ~5 degree more.
    4. Metallic should be printing with black setting.
    5. Transparent needs the less energy to extrude.
    6. Retraction settings: 4.5 mm @ 100 mm/sec.
    7. Let print bed cool down to room temperature before removing your print.
    8. Works great on glass platform, PEI, blue tape, buildtak, and kapton tape.
    9. Adhesion solution: hair spray, ABS juice, and glue stick.
    10. Can be printed without heated print bed.
    11. If wrapping occurs, print using raft.
    12. First layer usually 5 to 10 C higher than subsequent layers.
    13. First layer usually print at 35mm/sec or slower.
    14. PLA absorbs heat and so benefits from additional active cooling.
    15. PLA adsorbs moisture.  Un-used spool should store in container or plastic bag.
    16. Use sandpaper to smooth out the print.
    17. Can be painted with acrylic without post processing.
    18. Can also read our article on how to print with BotFeeder PLA

    Materials Quality

    Material Grade: NatureWorks 4032D
    Filament Diameter: 1.75mm
    Diameter Tolerance: +/- 0.03mm
    Roundness Tolerance: +/- 0.05mm
    Filament Weight: 1kg (700g for metallic & silky pearl)
    Spool Length x Width: 190mm x 85mm
    Spool Hole Diameter: 38mm
    Spool Weight: 500g

    BotFeeder PLA Black Filament Dimension


    BotFeeder Original PLA is Made to Perfection.


    Raw Material

    The premium PLA grade is selected based on providing the safest printing experience. All virgin PLA pellets are supplied by NatureWorks LLC, a globally well-known company manufactures Ingeo brand polylactic acid (PLA).


    Natural Color Pigment

    All color pigments are extracted from nature. NOT chemical engineered pigment.  During the process of 3D printing, you'll noticed a pleasant sweet scent in the air.


    Filtration Treatment

    Before production, all PLA pellets and color pigments undergo a filtration process to remove any larger particles that might clogged the nozzle during printing.


    Anti-Moist Treatment

    All raw materials have undergone dying treatment before production, as the practice of which prevents 'bubbles' occurrence during extrusion due to moisture content within the raw materials.


    Coloring Masterbatch

    Identical colors from spool to spool.


    Diameter Control

    An important machine in our production are the laser measurement systems used to check the diameter of our filament real time during production. It’s measured over 1000 times per second and helps us guarantee that each spool of BotFeeder 3d printing filament produced within tolerance. We can guarantee 0.03mm +/- on both 2.90mm and 1.75mm BotFeeder 3D Printer Filament, which means you can rest assured that your printer is extruding the exact amount of material.


    Enhanced Spool Holder

    In combination with a specially design spool and stronger material the BotFeeder spool is able to withstand the impact from dropping on the floor. From an in-house test, a typical 1kg spool of filament did not break/snap after 12 drops.


    Vacuum Sealed Packaging

    Within minutes of production a spool of BotFeeder 3d printing filament is wrapped with a protective film and then sealed airtight with a double barrier foil. To ensure minimal moisture, we upgraded to a large pack of desiccant.  To go the extra mile, we’ll also seal the fancy cardboard box that we use to ship our product. You can make sure BotFeeder 3d printing filament is fresh and ready for 3d printing when you’re done unboxing.


    BotFeeder Filament Packaging


    In-House Production

    All BotFeeder 3D Printer Filaments are produced in our own production facility, situated in the Taiwan. Since no external parties are involved in the making of BotFeeder filament we can ensure consistent quality on every order.


    In-House Testing

    The BotFeeder Testlab features a wide range of popular 3D printers. We’re continuously testing on our 3D printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community. If your not sure how to print with our materials on your 3D printer, please contact us at support@botfeeder.ca


    The following printers are used in our lab

    • Ultimaker Original
    • Ultimaker 2
    • Makerbot Replicator 2X
    • Lulzbot Mini
    • Original Pursa I3
    • Creality CR-10
    • Solidoodle 3
    • UFO Standard (Delta & E3D hot-end)
    • Rapidbot 2

    Companies who are interested in having their 3D printer(s) featured in our testlab can contact us at support@botfeeder.ca


    Care

    Storing Your Filament

    Please note that improper storage may damage your filament. To maintain its original quality, it's strongly recommended that the filament be stored in the following conditions:

    • A dehumidifier cabinet or a dry and circulated area
    • Room temperature
    • Avoid direct sunlight or heat source

    Selecting A Printer Location

    Please note poor printer location will have a negative effect on your print result and possible of damaging your filament. To select the most ideal location for your printer, please follow this guide.

    • Consistent temperature
    • Stable air flow
    • Away from furniture for safety

    Avoid Tangling Your Filament

    When unpacking, changing filament or unloading, It is strongly suggested to get a good grip at the end of the filament at all times in order to prevent tangling. The spool holder is specifically designed with 2 holes of each side, allowing you to secure the end of the filament by threading into it. or you can simply 3D print a "Filament clip" that is attached to the spool holder itself.


    BotFeeder PLA Colour Code & Filament Tracker


    If Filament Gets Damp

    Dry it slowly in room temperature. Please note that heat drying the filament will damages its quality by making it become brittle. The preferred method of drying your filament is to put in a dehumidifier cabinet or in an airtight bag with a few packs of desiccants. It's recommended to maintain a humidity level of 25% or less.

    Certifications

    To take an extra step for your safety, BotFeeder 3D Printer Filaments are being tested on an annually basis by SGS. On top of that, all our filaments are manufactured in compliance of RoHS (Restriction of Hazardous Substances).  Why is it important?  It basically means the filaments are free from lead and other potentially hazardous substances including cadmium, mercury and chromium VI, among others.


    SGS Certification


    Material Science

    BotFeeder was founded as a brand of Liing Shian Colorant Manufacturer which have been active in the masterbatch, and pigment & chemical auxiliaries for the plastics processing industry. Our knowhow, network and partnerships is driving material innovations and quality. You can expect BotFeeder to keep on developing interesting new materials, which will be tested on a variety of printers to make sure it’ll get the job done.

      $35.00 CAD

      BotFeeder Original ABS Filament

      Engineer Grade
      Toughness
      Durable
      Impact Resistance
      Heat Resistance
      Weatherproof
      Outdoor & Indoor
      Compatible with most 3D printers on the market

      Temp. & Tips

      At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


      This profile is optimized based on UFO 3D Printer. A good reference point of where to start.
      3D printer type: delta
      Nozzle size: 0.30 mm
      Resolution: 0.10 mm
      Extrusion temperature: 250 C
      Print bed temperature: 110 C
      Print speed: 65 mm/sec (default speed)
      Adhesion type: brim
      Retraction distance: 4.5 mm
      Retraction speed: 100 mm/sec
      Prime: no
      Support infill: 15%
      Support pattern: zig zag
      Support angle: 50 degree
      Dense support layer: 2
      Dense Infill: 60%
      Upper separation layer: 1 to 2 (or 0.20 mm)
      Lower separation layer: 1 to 2 (or 0.20 mm)


      Printing Notes

      1. Extrusion Temperature: 250 to 260C
      2. Print Bed Temperature: 110 to 120C
      3. If you are printing white at 250C, black will require ~5 degree more.
      4. Let print bed cool down to room temperature before removing your print.
      5. Must print with heated print bed.
      6. Works great on glass platform, PEI, blue tape, buildtak, and kapton tape.
      7. Adhesion solution: hair spray, ABS juice, and glue stick
      8. If wrapping occurs, print using raft.
      9. Enclosure improves print quality.
      10. First layer usually 5 to 10 C higher than subsequent layers.
      11. First layer usually print at 35mm/sec or slower.
      12. ABS absorbs heat and so benefits from additional active cooling.
      13. ABS adsorbs ~5% of moisture.  Un-used spool should store in container or plastic bag.
      14. Use Acetone to smooth out the print.
      15. Sand the print down with 300-grit sandpaper before acrylic painting.
      16. Longer life span compared to PLA.
      17. More flexible compared to PLA.
      18. Can also read article on how to print with BotFeeder ABS
      Materials Quality

      Material Grade: Chi Mei Polylac PA-747
      Filament Diameter: 1.75mm or 2.90mm
      Diameter Tolerance: +/- 0.03mm
      Roundness Tolerance: +/- 0.05mm
      Filament Weight: 1kg
      Spool Length x Width: 190mm x 85mm
      Spool Hole Diameter: 38mm
      Spool Weight: 500g


      BotFeeder Original ABS is Made to Perfection.


      Raw Material

      The premium ABS grade is selected based on providing engineering needs. All virgin ABS pellets are supplied by Chi Mei Corp. a globally well-known company manufactures polylac (ABS).


      Natural Color Pigment

      All color pigments are extracted from nature. NOT chemical engineered pigment.  During the process of 3D printing, you'll noticed a pleasant sweet scent in the air.


      Filtration Treatment

      Before production, all ABS pellets and color pigments undergo a filtration process to remove any larger particles that might clogged the nozzle during printing.


      Anti-Moist Treatment

      All raw materials have undergone dying treatment before production, as the practice of which prevents 'bubbles' occurrence during extrusion due to moisture content within the raw materials.


      Coloring Masterbatch

      Identical colors from spool to spool.


      Diameter Control

      An important machine in our production are the laser measurement systems used to check the diameter of our filament real time during production. It’s measured over 1000 times per second and helps us guarantee that each spool of BotFeeder 3d printing filament produced within tolerance. We can guarantee 0.03mm +/- on both 2.90mm and 1.75mm BotFeeder 3D Printer Filament, which means you can rest assured that your printer is extruding the exact amount of material.


      Enhanced Spool Holder

      In combination with a specially design spool and stronger material the BotFeeder spool is able to withstand the impact from dropping on the floor. From an in-house test, a typical 1kg spool of filament did not break/snap after 12 drops.


      Vacuum Sealed Packaging

      Within minutes of production a spool of BotFeeder 3d printing filament is wrapped with a protective film and then sealed airtight with a double barrier foil. To ensure minimal moisture, we upgraded to a large pack of desiccant.  To go the extra mile, we’ll also seal the fancy cardboard box that we use to ship our product. You can make sure BotFeeder 3d printing filament is fresh and ready for 3d printing when you’re done unboxing.


      BotFeeder Filament Packaging


      In-House Production

      All BotFeeder 3D Printer Filaments are produced in our own production facility, situated in the Taiwan. Since no external parties are involved in the making of BotFeeder filament we can ensure consistent quality on every order.


      In-House Testing

      The BotFeeder Testlab features a wide range of popular 3D printers. We’re continuously testing on our 3D printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community. If your not sure how to print with our materials on your 3D printer, please contact us at support@botfeeder.ca


      The following printers are used in our lab

      • Ultimaker Original
      • Ultimaker 2
      • Makerbot Replicator 2X
      • Lulzbot Mini
      • Original Pursa I3
      • Creality CR-10
      • Solidoodle 3
      • UFO Standard (Delta & E3D hot-end)
      • Rapidbot 2

      Companies who are interested in having their 3D printer(s) featured in our testlab can contact us at support@botfeeder.ca


      Care

      Storing Your Filament

      Please note that improper storage may damage your filament. To maintain its original quality, it's strongly recommended that the filament be stored in the following conditions:

      • A dehumidifier cabinet or a dry and circulated area
      • Room temperature
      • Avoid direct sunlight or heat source

      Selecting A Printer Location

      Please note poor printer location will have a negative effect on your print result and possible of damaging your filament. To select the most ideal location for your printer, please follow this guide.

      • Consistent temperature
      • Stable air flow
      • Away from furniture for safety

      Avoid Tangling Your Filament

      When unpacking, changing filament or unloading, It is strongly suggested to get a good grip at the end of the filament at all times in order to prevent tangling. The spool holder is specifically designed with 2 holes of each side, allowing you to secure the end of the filament by threading into it. or you can simply 3D print a "Filament clip" that is attached to the spool holder itself.


      BotFeeder PLA Colour Code & Filament Tracker


      If Filament Gets Damp

      Dry it slowly in room temperature. Please note that heat drying the filament will damages its quality by making it become brittle. The preferred method of drying your filament is to put in a dehumidifier cabinet or in an airtight bag with a few packs of desiccants. It's recommended to maintain a humidity level of 25% or less.

      Certifications

      To take an extra step for your safety, BotFeeder 3D Printer Filaments are being tested on an annually basis by SGS. On top of that, all our filaments are manufactured in compliance of RoHS (Restriction of Hazardous Substances).  Why is it important?  It basically means the filaments are free from lead and other potentially hazardous substances including cadmium, mercury and chromium VI, among others.


      SGS Certification


      Material Science

      BotFeeder was founded as a brand of Liing Shian Colorant Manufacturer which have been active in the masterbatch, and pigment & chemical auxiliaries for the plastics processing industry. Our knowhow, network and partnerships is driving material innovations and quality. You can expect BotFeeder to keep on developing interesting new materials, which will be tested on a variety of printers to make sure it’ll get the job done.

        Sold Out
        700g PLA Filament 1.75mm – Metallic Copper

        BotFeeder Original PLA Filament

        Kids Friendly
        Minimized VOC Emissions
        0 Toxic Additive Added
        ~100% PLA
        Compatible with most 3D printers on the market


        Health Check

        If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

        • Eye, nose and throat irritation
        • Headache, loss of concentration and nausea
        • Allergic skin reaction
        • Dizziness
          Temp. & Tips

          At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


          Our Setting Profile

          3D printer type: delta
          Nozzle size: 0.30 mm
          Resolution: 0.10 mm
          Extrusion temperature: 200 C
          Print bed temperature: 65 C
          Print speed: 65 mm/sec (default speed)
          Adhesion type: brim
          Retraction distance: 4.5 mm
          Retraction speed: 100 mm/sec
          Prime: no
          Support infill: 15%
          Support pattern: zig zag
          Support angle: 50 degree
          Dense support layer: 2
          Dense Infill: 60%
          Upper separation layer: 1 to 2 (or 0.20 mm)
          Lower separation layer: 1 to 2 (or 0.20 mm)


          Printing Notes

          1. Extrusion Temperature: 200 to 220C
          2. Print Bed Temperature: 60 to 70C (optional)
          3. If you are printing white at 200C, black will require ~5 degree more.
          4. Metallic should be printing with black setting.
          5. Transparent needs the less energy to extrude.
          6. Retraction settings: 4.5 mm @ 100 mm/sec.
          7. Let print bed cool down to room temperature before removing your print.
          8. Works great on glass platform, PEI, blue tape, buildtak, and kapton tape.
          9. Adhesion solution: hair spray, ABS juice, and glue stick.
          10. Can be printed without heated print bed.
          11. If wrapping occurs, print using raft.
          12. First layer usually 5 to 10 C higher than subsequent layers.
          13. First layer usually print at 35mm/sec or slower.
          14. PLA absorbs heat and so benefits from additional active cooling.
          15. PLA adsorbs moisture.  Un-used spool should store in container or plastic bag.
          16. Use sandpaper to smooth out the print.
          17. Can be painted with acrylic without post processing.
          18. Can also read our article on how to print with BotFeeder PLA

          Materials Quality

          Material Grade: NatureWorks 4032D
          Filament Diameter: 1.75mm
          Diameter Tolerance: +/- 0.03mm
          Roundness Tolerance: +/- 0.05mm
          Filament Weight: 1kg (700g for metallic & silky pearl)
          Spool Length x Width: 190mm x 85mm
          Spool Hole Diameter: 38mm
          Spool Weight: 500g

          BotFeeder PLA Black Filament Dimension


          BotFeeder Original PLA is Made to Perfection.


          Raw Material

          The premium PLA grade is selected based on providing the safest printing experience. All virgin PLA pellets are supplied by NatureWorks LLC, a globally well-known company manufactures Ingeo brand polylactic acid (PLA).


          Natural Color Pigment

          All color pigments are extracted from nature. NOT chemical engineered pigment.  During the process of 3D printing, you'll noticed a pleasant sweet scent in the air.


          Filtration Treatment

          Before production, all PLA pellets and color pigments undergo a filtration process to remove any larger particles that might clogged the nozzle during printing.


          Anti-Moist Treatment

          All raw materials have undergone dying treatment before production, as the practice of which prevents 'bubbles' occurrence during extrusion due to moisture content within the raw materials.


          Coloring Masterbatch

          Identical colors from spool to spool.


          Diameter Control

          An important machine in our production are the laser measurement systems used to check the diameter of our filament real time during production. It’s measured over 1000 times per second and helps us guarantee that each spool of BotFeeder 3d printing filament produced within tolerance. We can guarantee 0.03mm +/- on both 2.90mm and 1.75mm BotFeeder 3D Printer Filament, which means you can rest assured that your printer is extruding the exact amount of material.


          Enhanced Spool Holder

          In combination with a specially design spool and stronger material the BotFeeder spool is able to withstand the impact from dropping on the floor. From an in-house test, a typical 1kg spool of filament did not break/snap after 12 drops.


          Vacuum Sealed Packaging

          Within minutes of production a spool of BotFeeder 3d printing filament is wrapped with a protective film and then sealed airtight with a double barrier foil. To ensure minimal moisture, we upgraded to a large pack of desiccant.  To go the extra mile, we’ll also seal the fancy cardboard box that we use to ship our product. You can make sure BotFeeder 3d printing filament is fresh and ready for 3d printing when you’re done unboxing.


          BotFeeder Filament Packaging


          In-House Production

          All BotFeeder 3D Printer Filaments are produced in our own production facility, situated in the Taiwan. Since no external parties are involved in the making of BotFeeder filament we can ensure consistent quality on every order.


          In-House Testing

          The BotFeeder Testlab features a wide range of popular 3D printers. We’re continuously testing on our 3D printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community. If your not sure how to print with our materials on your 3D printer, please contact us at support@botfeeder.ca


          The following printers are used in our lab

          • Ultimaker Original
          • Ultimaker 2
          • Makerbot Replicator 2X
          • Lulzbot Mini
          • Original Pursa I3
          • Creality CR-10
          • Solidoodle 3
          • UFO Standard (Delta & E3D hot-end)
          • Rapidbot 2

          Companies who are interested in having their 3D printer(s) featured in our testlab can contact us at support@botfeeder.ca


          Care

          Storing Your Filament

          Please note that improper storage may damage your filament. To maintain its original quality, it's strongly recommended that the filament be stored in the following conditions:

          • A dehumidifier cabinet or a dry and circulated area
          • Room temperature
          • Avoid direct sunlight or heat source

          Selecting A Printer Location

          Please note poor printer location will have a negative effect on your print result and possible of damaging your filament. To select the most ideal location for your printer, please follow this guide.

          • Consistent temperature
          • Stable air flow
          • Away from furniture for safety

          Avoid Tangling Your Filament

          When unpacking, changing filament or unloading, It is strongly suggested to get a good grip at the end of the filament at all times in order to prevent tangling. The spool holder is specifically designed with 2 holes of each side, allowing you to secure the end of the filament by threading into it. or you can simply 3D print a "Filament clip" that is attached to the spool holder itself.


          BotFeeder PLA Colour Code & Filament Tracker


          If Filament Gets Damp

          Dry it slowly in room temperature. Please note that heat drying the filament will damages its quality by making it become brittle. The preferred method of drying your filament is to put in a dehumidifier cabinet or in an airtight bag with a few packs of desiccants. It's recommended to maintain a humidity level of 25% or less.

          Certifications

          To take an extra step for your safety, BotFeeder 3D Printer Filaments are being tested on an annually basis by SGS. On top of that, all our filaments are manufactured in compliance of RoHS (Restriction of Hazardous Substances).  Why is it important?  It basically means the filaments are free from lead and other potentially hazardous substances including cadmium, mercury and chromium VI, among others.


          SGS Certification


          Material Science

          BotFeeder was founded as a brand of Liing Shian Colorant Manufacturer which have been active in the masterbatch, and pigment & chemical auxiliaries for the plastics processing industry. Our knowhow, network and partnerships is driving material innovations and quality. You can expect BotFeeder to keep on developing interesting new materials, which will be tested on a variety of printers to make sure it’ll get the job done.

            $35.00 CAD
            1kg PLA Filament 1.75mm – Light Tan (Skin)

            BotFeeder Original PLA Filament

            Kids Friendly
            Minimized VOC Emissions
            0 Toxic Additive Added
            ~100% PLA
            Compatible with most 3D printers on the market


            Health Check

            If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

            • Eye, nose and throat irritation
            • Headache, loss of concentration and nausea
            • Allergic skin reaction
            • Dizziness
              Temp. & Tips

              At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


              Our Setting Profile

              3D printer type: delta
              Nozzle size: 0.30 mm
              Resolution: 0.10 mm
              Extrusion temperature: 200 C
              Print bed temperature: 65 C
              Print speed: 65 mm/sec (default speed)
              Adhesion type: brim
              Retraction distance: 4.5 mm
              Retraction speed: 100 mm/sec
              Prime: no
              Support infill: 15%
              Support pattern: zig zag
              Support angle: 50 degree
              Dense support layer: 2
              Dense Infill: 60%
              Upper separation layer: 1 to 2 (or 0.20 mm)
              Lower separation layer: 1 to 2 (or 0.20 mm)


              Printing Notes

              1. Extrusion Temperature: 200 to 220C
              2. Print Bed Temperature: 60 to 70C (optional)
              3. If you are printing white at 200C, black will require ~5 degree more.
              4. Metallic should be printing with black setting.
              5. Transparent needs the less energy to extrude.
              6. Retraction settings: 4.5 mm @ 100 mm/sec.
              7. Let print bed cool down to room temperature before removing your print.
              8. Works great on glass platform, PEI, blue tape, buildtak, and kapton tape.
              9. Adhesion solution: hair spray, ABS juice, and glue stick.
              10. Can be printed without heated print bed.
              11. If wrapping occurs, print using raft.
              12. First layer usually 5 to 10 C higher than subsequent layers.
              13. First layer usually print at 35mm/sec or slower.
              14. PLA absorbs heat and so benefits from additional active cooling.
              15. PLA adsorbs moisture.  Un-used spool should store in container or plastic bag.
              16. Use sandpaper to smooth out the print.
              17. Can be painted with acrylic without post processing.
              18. Can also read our article on how to print with BotFeeder PLA

              Materials Quality

              Material Grade: NatureWorks 4032D
              Filament Diameter: 1.75mm
              Diameter Tolerance: +/- 0.03mm
              Roundness Tolerance: +/- 0.05mm
              Filament Weight: 1kg (700g for metallic & silky pearl)
              Spool Length x Width: 190mm x 85mm
              Spool Hole Diameter: 38mm
              Spool Weight: 500g

              BotFeeder PLA Black Filament Dimension


              BotFeeder Original PLA is Made to Perfection.


              Raw Material

              The premium PLA grade is selected based on providing the safest printing experience. All virgin PLA pellets are supplied by NatureWorks LLC, a globally well-known company manufactures Ingeo brand polylactic acid (PLA).


              Natural Color Pigment

              All color pigments are extracted from nature. NOT chemical engineered pigment.  During the process of 3D printing, you'll noticed a pleasant sweet scent in the air.


              Filtration Treatment

              Before production, all PLA pellets and color pigments undergo a filtration process to remove any larger particles that might clogged the nozzle during printing.


              Anti-Moist Treatment

              All raw materials have undergone dying treatment before production, as the practice of which prevents 'bubbles' occurrence during extrusion due to moisture content within the raw materials.


              Coloring Masterbatch

              Identical colors from spool to spool.


              Diameter Control

              An important machine in our production are the laser measurement systems used to check the diameter of our filament real time during production. It’s measured over 1000 times per second and helps us guarantee that each spool of BotFeeder 3d printing filament produced within tolerance. We can guarantee 0.03mm +/- on both 2.90mm and 1.75mm BotFeeder 3D Printer Filament, which means you can rest assured that your printer is extruding the exact amount of material.


              Enhanced Spool Holder

              In combination with a specially design spool and stronger material the BotFeeder spool is able to withstand the impact from dropping on the floor. From an in-house test, a typical 1kg spool of filament did not break/snap after 12 drops.


              Vacuum Sealed Packaging

              Within minutes of production a spool of BotFeeder 3d printing filament is wrapped with a protective film and then sealed airtight with a double barrier foil. To ensure minimal moisture, we upgraded to a large pack of desiccant.  To go the extra mile, we’ll also seal the fancy cardboard box that we use to ship our product. You can make sure BotFeeder 3d printing filament is fresh and ready for 3d printing when you’re done unboxing.


              BotFeeder Filament Packaging


              In-House Production

              All BotFeeder 3D Printer Filaments are produced in our own production facility, situated in the Taiwan. Since no external parties are involved in the making of BotFeeder filament we can ensure consistent quality on every order.


              In-House Testing

              The BotFeeder Testlab features a wide range of popular 3D printers. We’re continuously testing on our 3D printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community. If your not sure how to print with our materials on your 3D printer, please contact us at support@botfeeder.ca


              The following printers are used in our lab

              • Ultimaker Original
              • Ultimaker 2
              • Makerbot Replicator 2X
              • Lulzbot Mini
              • Original Pursa I3
              • Creality CR-10
              • Solidoodle 3
              • UFO Standard (Delta & E3D hot-end)
              • Rapidbot 2

              Companies who are interested in having their 3D printer(s) featured in our testlab can contact us at support@botfeeder.ca


              Care

              Storing Your Filament

              Please note that improper storage may damage your filament. To maintain its original quality, it's strongly recommended that the filament be stored in the following conditions:

              • A dehumidifier cabinet or a dry and circulated area
              • Room temperature
              • Avoid direct sunlight or heat source

              Selecting A Printer Location

              Please note poor printer location will have a negative effect on your print result and possible of damaging your filament. To select the most ideal location for your printer, please follow this guide.

              • Consistent temperature
              • Stable air flow
              • Away from furniture for safety

              Avoid Tangling Your Filament

              When unpacking, changing filament or unloading, It is strongly suggested to get a good grip at the end of the filament at all times in order to prevent tangling. The spool holder is specifically designed with 2 holes of each side, allowing you to secure the end of the filament by threading into it. or you can simply 3D print a "Filament clip" that is attached to the spool holder itself.


              BotFeeder PLA Colour Code & Filament Tracker


              If Filament Gets Damp

              Dry it slowly in room temperature. Please note that heat drying the filament will damages its quality by making it become brittle. The preferred method of drying your filament is to put in a dehumidifier cabinet or in an airtight bag with a few packs of desiccants. It's recommended to maintain a humidity level of 25% or less.

              Certifications

              To take an extra step for your safety, BotFeeder 3D Printer Filaments are being tested on an annually basis by SGS. On top of that, all our filaments are manufactured in compliance of RoHS (Restriction of Hazardous Substances).  Why is it important?  It basically means the filaments are free from lead and other potentially hazardous substances including cadmium, mercury and chromium VI, among others.


              SGS Certification


              Material Science

              BotFeeder was founded as a brand of Liing Shian Colorant Manufacturer which have been active in the masterbatch, and pigment & chemical auxiliaries for the plastics processing industry. Our knowhow, network and partnerships is driving material innovations and quality. You can expect BotFeeder to keep on developing interesting new materials, which will be tested on a variety of printers to make sure it’ll get the job done.

                $35.00 CAD
                1kg ABS Filament 1.75mm – Gray

                BotFeeder Original ABS Filament

                Engineer Grade
                Toughness
                Durable
                Impact Resistance
                Heat Resistance
                Weatherproof
                Outdoor & Indoor
                Compatible with most 3D printers on the market

                Temp. & Tips

                At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                This profile is optimized based on UFO 3D Printer. A good reference point of where to start.
                3D printer type: delta
                Nozzle size: 0.30 mm
                Resolution: 0.10 mm
                Extrusion temperature: 250 C
                Print bed temperature: 110 C
                Print speed: 65 mm/sec (default speed)
                Adhesion type: brim
                Retraction distance: 4.5 mm
                Retraction speed: 100 mm/sec
                Prime: no
                Support infill: 15%
                Support pattern: zig zag
                Support angle: 50 degree
                Dense support layer: 2
                Dense Infill: 60%
                Upper separation layer: 1 to 2 (or 0.20 mm)
                Lower separation layer: 1 to 2 (or 0.20 mm)


                Printing Notes

                1. Extrusion Temperature: 250 to 260C
                2. Print Bed Temperature: 110 to 120C
                3. If you are printing white at 250C, black will require ~5 degree more.
                4. Let print bed cool down to room temperature before removing your print.
                5. Must print with heated print bed.
                6. Works great on glass platform, PEI, blue tape, buildtak, and kapton tape.
                7. Adhesion solution: hair spray, ABS juice, and glue stick
                8. If wrapping occurs, print using raft.
                9. Enclosure improves print quality.
                10. First layer usually 5 to 10 C higher than subsequent layers.
                11. First layer usually print at 35mm/sec or slower.
                12. ABS absorbs heat and so benefits from additional active cooling.
                13. ABS adsorbs ~5% of moisture.  Un-used spool should store in container or plastic bag.
                14. Use Acetone to smooth out the print.
                15. Sand the print down with 300-grit sandpaper before acrylic painting.
                16. Longer life span compared to PLA.
                17. More flexible compared to PLA.
                18. Can also read article on how to print with BotFeeder ABS
                Materials Quality

                Material Grade: Chi Mei Polylac PA-747
                Filament Diameter: 1.75mm or 2.90mm
                Diameter Tolerance: +/- 0.03mm
                Roundness Tolerance: +/- 0.05mm
                Filament Weight: 1kg
                Spool Length x Width: 190mm x 85mm
                Spool Hole Diameter: 38mm
                Spool Weight: 500g


                BotFeeder Original ABS is Made to Perfection.


                Raw Material

                The premium ABS grade is selected based on providing engineering needs. All virgin ABS pellets are supplied by Chi Mei Corp. a globally well-known company manufactures polylac (ABS).


                Natural Color Pigment

                All color pigments are extracted from nature. NOT chemical engineered pigment.  During the process of 3D printing, you'll noticed a pleasant sweet scent in the air.


                Filtration Treatment

                Before production, all ABS pellets and color pigments undergo a filtration process to remove any larger particles that might clogged the nozzle during printing.


                Anti-Moist Treatment

                All raw materials have undergone dying treatment before production, as the practice of which prevents 'bubbles' occurrence during extrusion due to moisture content within the raw materials.


                Coloring Masterbatch

                Identical colors from spool to spool.


                Diameter Control

                An important machine in our production are the laser measurement systems used to check the diameter of our filament real time during production. It’s measured over 1000 times per second and helps us guarantee that each spool of BotFeeder 3d printing filament produced within tolerance. We can guarantee 0.03mm +/- on both 2.90mm and 1.75mm BotFeeder 3D Printer Filament, which means you can rest assured that your printer is extruding the exact amount of material.


                Enhanced Spool Holder

                In combination with a specially design spool and stronger material the BotFeeder spool is able to withstand the impact from dropping on the floor. From an in-house test, a typical 1kg spool of filament did not break/snap after 12 drops.


                Vacuum Sealed Packaging

                Within minutes of production a spool of BotFeeder 3d printing filament is wrapped with a protective film and then sealed airtight with a double barrier foil. To ensure minimal moisture, we upgraded to a large pack of desiccant.  To go the extra mile, we’ll also seal the fancy cardboard box that we use to ship our product. You can make sure BotFeeder 3d printing filament is fresh and ready for 3d printing when you’re done unboxing.


                BotFeeder Filament Packaging


                In-House Production

                All BotFeeder 3D Printer Filaments are produced in our own production facility, situated in the Taiwan. Since no external parties are involved in the making of BotFeeder filament we can ensure consistent quality on every order.


                In-House Testing

                The BotFeeder Testlab features a wide range of popular 3D printers. We’re continuously testing on our 3D printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community. If your not sure how to print with our materials on your 3D printer, please contact us at support@botfeeder.ca


                The following printers are used in our lab

                • Ultimaker Original
                • Ultimaker 2
                • Makerbot Replicator 2X
                • Lulzbot Mini
                • Original Pursa I3
                • Creality CR-10
                • Solidoodle 3
                • UFO Standard (Delta & E3D hot-end)
                • Rapidbot 2

                Companies who are interested in having their 3D printer(s) featured in our testlab can contact us at support@botfeeder.ca


                Care

                Storing Your Filament

                Please note that improper storage may damage your filament. To maintain its original quality, it's strongly recommended that the filament be stored in the following conditions:

                • A dehumidifier cabinet or a dry and circulated area
                • Room temperature
                • Avoid direct sunlight or heat source

                Selecting A Printer Location

                Please note poor printer location will have a negative effect on your print result and possible of damaging your filament. To select the most ideal location for your printer, please follow this guide.

                • Consistent temperature
                • Stable air flow
                • Away from furniture for safety

                Avoid Tangling Your Filament

                When unpacking, changing filament or unloading, It is strongly suggested to get a good grip at the end of the filament at all times in order to prevent tangling. The spool holder is specifically designed with 2 holes of each side, allowing you to secure the end of the filament by threading into it. or you can simply 3D print a "Filament clip" that is attached to the spool holder itself.


                BotFeeder PLA Colour Code & Filament Tracker


                If Filament Gets Damp

                Dry it slowly in room temperature. Please note that heat drying the filament will damages its quality by making it become brittle. The preferred method of drying your filament is to put in a dehumidifier cabinet or in an airtight bag with a few packs of desiccants. It's recommended to maintain a humidity level of 25% or less.

                Certifications

                To take an extra step for your safety, BotFeeder 3D Printer Filaments are being tested on an annually basis by SGS. On top of that, all our filaments are manufactured in compliance of RoHS (Restriction of Hazardous Substances).  Why is it important?  It basically means the filaments are free from lead and other potentially hazardous substances including cadmium, mercury and chromium VI, among others.


                SGS Certification


                Material Science

                BotFeeder was founded as a brand of Liing Shian Colorant Manufacturer which have been active in the masterbatch, and pigment & chemical auxiliaries for the plastics processing industry. Our knowhow, network and partnerships is driving material innovations and quality. You can expect BotFeeder to keep on developing interesting new materials, which will be tested on a variety of printers to make sure it’ll get the job done.

                  $35.00 CAD

                  BotFeeder Original PLA Filament

                  Kids Friendly
                  Minimized VOC Emissions
                  0 Toxic Additive Added
                  ~100% PLA
                  Compatible with most 3D printers on the market


                  Health Check

                  If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                  • Eye, nose and throat irritation
                  • Headache, loss of concentration and nausea
                  • Allergic skin reaction
                  • Dizziness
                    Temp. & Tips

                    At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                    Our Setting Profile

                    3D printer type: delta
                    Nozzle size: 0.30 mm
                    Resolution: 0.10 mm
                    Extrusion temperature: 200 C
                    Print bed temperature: 65 C
                    Print speed: 65 mm/sec (default speed)
                    Adhesion type: brim
                    Retraction distance: 4.5 mm
                    Retraction speed: 100 mm/sec
                    Prime: no
                    Support infill: 15%
                    Support pattern: zig zag
                    Support angle: 50 degree
                    Dense support layer: 2
                    Dense Infill: 60%
                    Upper separation layer: 1 to 2 (or 0.20 mm)
                    Lower separation layer: 1 to 2 (or 0.20 mm)


                    Printing Notes

                    1. Extrusion Temperature: 200 to 220C
                    2. Print Bed Temperature: 60 to 70C (optional)
                    3. If you are printing white at 200C, black will require ~5 degree more.
                    4. Metallic should be printing with black setting.
                    5. Transparent needs the less energy to extrude.
                    6. Retraction settings: 4.5 mm @ 100 mm/sec.
                    7. Let print bed cool down to room temperature before removing your print.
                    8. Works great on glass platform, PEI, blue tape, buildtak, and kapton tape.
                    9. Adhesion solution: hair spray, ABS juice, and glue stick.
                    10. Can be printed without heated print bed.
                    11. If wrapping occurs, print using raft.
                    12. First layer usually 5 to 10 C higher than subsequent layers.
                    13. First layer usually print at 35mm/sec or slower.
                    14. PLA absorbs heat and so benefits from additional active cooling.
                    15. PLA adsorbs moisture.  Un-used spool should store in container or plastic bag.
                    16. Use sandpaper to smooth out the print.
                    17. Can be painted with acrylic without post processing.
                    18. Can also read our article on how to print with BotFeeder PLA

                    Materials Quality

                    Material Grade: NatureWorks 4032D
                    Filament Diameter: 1.75mm
                    Diameter Tolerance: +/- 0.03mm
                    Roundness Tolerance: +/- 0.05mm
                    Filament Weight: 1kg (700g for metallic & silky pearl)
                    Spool Length x Width: 190mm x 85mm
                    Spool Hole Diameter: 38mm
                    Spool Weight: 500g

                    BotFeeder PLA Black Filament Dimension


                    BotFeeder Original PLA is Made to Perfection.


                    Raw Material

                    The premium PLA grade is selected based on providing the safest printing experience. All virgin PLA pellets are supplied by NatureWorks LLC, a globally well-known company manufactures Ingeo brand polylactic acid (PLA).


                    Natural Color Pigment

                    All color pigments are extracted from nature. NOT chemical engineered pigment.  During the process of 3D printing, you'll noticed a pleasant sweet scent in the air.


                    Filtration Treatment

                    Before production, all PLA pellets and color pigments undergo a filtration process to remove any larger particles that might clogged the nozzle during printing.


                    Anti-Moist Treatment

                    All raw materials have undergone dying treatment before production, as the practice of which prevents 'bubbles' occurrence during extrusion due to moisture content within the raw materials.


                    Coloring Masterbatch

                    Identical colors from spool to spool.


                    Diameter Control

                    An important machine in our production are the laser measurement systems used to check the diameter of our filament real time during production. It’s measured over 1000 times per second and helps us guarantee that each spool of BotFeeder 3d printing filament produced within tolerance. We can guarantee 0.03mm +/- on both 2.90mm and 1.75mm BotFeeder 3D Printer Filament, which means you can rest assured that your printer is extruding the exact amount of material.


                    Enhanced Spool Holder

                    In combination with a specially design spool and stronger material the BotFeeder spool is able to withstand the impact from dropping on the floor. From an in-house test, a typical 1kg spool of filament did not break/snap after 12 drops.


                    Vacuum Sealed Packaging

                    Within minutes of production a spool of BotFeeder 3d printing filament is wrapped with a protective film and then sealed airtight with a double barrier foil. To ensure minimal moisture, we upgraded to a large pack of desiccant.  To go the extra mile, we’ll also seal the fancy cardboard box that we use to ship our product. You can make sure BotFeeder 3d printing filament is fresh and ready for 3d printing when you’re done unboxing.


                    BotFeeder Filament Packaging


                    In-House Production

                    All BotFeeder 3D Printer Filaments are produced in our own production facility, situated in the Taiwan. Since no external parties are involved in the making of BotFeeder filament we can ensure consistent quality on every order.


                    In-House Testing

                    The BotFeeder Testlab features a wide range of popular 3D printers. We’re continuously testing on our 3D printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community. If your not sure how to print with our materials on your 3D printer, please contact us at support@botfeeder.ca


                    The following printers are used in our lab

                    • Ultimaker Original
                    • Ultimaker 2
                    • Makerbot Replicator 2X
                    • Lulzbot Mini
                    • Original Pursa I3
                    • Creality CR-10
                    • Solidoodle 3
                    • UFO Standard (Delta & E3D hot-end)
                    • Rapidbot 2

                    Companies who are interested in having their 3D printer(s) featured in our testlab can contact us at support@botfeeder.ca


                    Care

                    Storing Your Filament

                    Please note that improper storage may damage your filament. To maintain its original quality, it's strongly recommended that the filament be stored in the following conditions:

                    • A dehumidifier cabinet or a dry and circulated area
                    • Room temperature
                    • Avoid direct sunlight or heat source

                    Selecting A Printer Location

                    Please note poor printer location will have a negative effect on your print result and possible of damaging your filament. To select the most ideal location for your printer, please follow this guide.

                    • Consistent temperature
                    • Stable air flow
                    • Away from furniture for safety

                    Avoid Tangling Your Filament

                    When unpacking, changing filament or unloading, It is strongly suggested to get a good grip at the end of the filament at all times in order to prevent tangling. The spool holder is specifically designed with 2 holes of each side, allowing you to secure the end of the filament by threading into it. or you can simply 3D print a "Filament clip" that is attached to the spool holder itself.


                    BotFeeder PLA Colour Code & Filament Tracker


                    If Filament Gets Damp

                    Dry it slowly in room temperature. Please note that heat drying the filament will damages its quality by making it become brittle. The preferred method of drying your filament is to put in a dehumidifier cabinet or in an airtight bag with a few packs of desiccants. It's recommended to maintain a humidity level of 25% or less.

                    Certifications

                    To take an extra step for your safety, BotFeeder 3D Printer Filaments are being tested on an annually basis by SGS. On top of that, all our filaments are manufactured in compliance of RoHS (Restriction of Hazardous Substances).  Why is it important?  It basically means the filaments are free from lead and other potentially hazardous substances including cadmium, mercury and chromium VI, among others.


                    SGS Certification


                    Material Science

                    BotFeeder was founded as a brand of Liing Shian Colorant Manufacturer which have been active in the masterbatch, and pigment & chemical auxiliaries for the plastics processing industry. Our knowhow, network and partnerships is driving material innovations and quality. You can expect BotFeeder to keep on developing interesting new materials, which will be tested on a variety of printers to make sure it’ll get the job done.

                      Sold Out

                      BotFeeder Original PLA Filament

                      Kids Friendly
                      Minimized VOC Emissions
                      0 Toxic Additive Added
                      ~100% PLA
                      Compatible with most 3D printers on the market


                      Health Check

                      If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                      • Eye, nose and throat irritation
                      • Headache, loss of concentration and nausea
                      • Allergic skin reaction
                      • Dizziness
                        Temp. & Tips

                        At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                        Our Setting Profile

                        3D printer type: delta
                        Nozzle size: 0.30 mm
                        Resolution: 0.10 mm
                        Extrusion temperature: 200 C
                        Print bed temperature: 65 C
                        Print speed: 65 mm/sec (default speed)
                        Adhesion type: brim
                        Retraction distance: 4.5 mm
                        Retraction speed: 100 mm/sec
                        Prime: no
                        Support infill: 15%
                        Support pattern: zig zag
                        Support angle: 50 degree
                        Dense support layer: 2
                        Dense Infill: 60%
                        Upper separation layer: 1 to 2 (or 0.20 mm)
                        Lower separation layer: 1 to 2 (or 0.20 mm)


                        Printing Notes

                        1. Extrusion Temperature: 200 to 220C
                        2. Print Bed Temperature: 60 to 70C (optional)
                        3. If you are printing white at 200C, black will require ~5 degree more.
                        4. Metallic should be printing with black setting.
                        5. Transparent needs the less energy to extrude.
                        6. Retraction settings: 4.5 mm @ 100 mm/sec.
                        7. Let print bed cool down to room temperature before removing your print.
                        8. Works great on glass platform, PEI, blue tape, buildtak, and kapton tape.
                        9. Adhesion solution: hair spray, ABS juice, and glue stick.
                        10. Can be printed without heated print bed.
                        11. If wrapping occurs, print using raft.
                        12. First layer usually 5 to 10 C higher than subsequent layers.
                        13. First layer usually print at 35mm/sec or slower.
                        14. PLA absorbs heat and so benefits from additional active cooling.
                        15. PLA adsorbs moisture.  Un-used spool should store in container or plastic bag.
                        16. Use sandpaper to smooth out the print.
                        17. Can be painted with acrylic without post processing.
                        18. Can also read our article on how to print with BotFeeder PLA

                        Materials Quality

                        Material Grade: NatureWorks 4032D
                        Filament Diameter: 1.75mm
                        Diameter Tolerance: +/- 0.03mm
                        Roundness Tolerance: +/- 0.05mm
                        Filament Weight: 1kg (700g for metallic & silky pearl)
                        Spool Length x Width: 190mm x 85mm
                        Spool Hole Diameter: 38mm
                        Spool Weight: 500g

                        BotFeeder PLA Black Filament Dimension


                        BotFeeder Original PLA is Made to Perfection.


                        Raw Material

                        The premium PLA grade is selected based on providing the safest printing experience. All virgin PLA pellets are supplied by NatureWorks LLC, a globally well-known company manufactures Ingeo brand polylactic acid (PLA).


                        Natural Color Pigment

                        All color pigments are extracted from nature. NOT chemical engineered pigment.  During the process of 3D printing, you'll noticed a pleasant sweet scent in the air.


                        Filtration Treatment

                        Before production, all PLA pellets and color pigments undergo a filtration process to remove any larger particles that might clogged the nozzle during printing.


                        Anti-Moist Treatment

                        All raw materials have undergone dying treatment before production, as the practice of which prevents 'bubbles' occurrence during extrusion due to moisture content within the raw materials.


                        Coloring Masterbatch

                        Identical colors from spool to spool.


                        Diameter Control

                        An important machine in our production are the laser measurement systems used to check the diameter of our filament real time during production. It’s measured over 1000 times per second and helps us guarantee that each spool of BotFeeder 3d printing filament produced within tolerance. We can guarantee 0.03mm +/- on both 2.90mm and 1.75mm BotFeeder 3D Printer Filament, which means you can rest assured that your printer is extruding the exact amount of material.


                        Enhanced Spool Holder

                        In combination with a specially design spool and stronger material the BotFeeder spool is able to withstand the impact from dropping on the floor. From an in-house test, a typical 1kg spool of filament did not break/snap after 12 drops.


                        Vacuum Sealed Packaging

                        Within minutes of production a spool of BotFeeder 3d printing filament is wrapped with a protective film and then sealed airtight with a double barrier foil. To ensure minimal moisture, we upgraded to a large pack of desiccant.  To go the extra mile, we’ll also seal the fancy cardboard box that we use to ship our product. You can make sure BotFeeder 3d printing filament is fresh and ready for 3d printing when you’re done unboxing.


                        BotFeeder Filament Packaging


                        In-House Production

                        All BotFeeder 3D Printer Filaments are produced in our own production facility, situated in the Taiwan. Since no external parties are involved in the making of BotFeeder filament we can ensure consistent quality on every order.


                        In-House Testing

                        The BotFeeder Testlab features a wide range of popular 3D printers. We’re continuously testing on our 3D printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community. If your not sure how to print with our materials on your 3D printer, please contact us at support@botfeeder.ca


                        The following printers are used in our lab

                        • Ultimaker Original
                        • Ultimaker 2
                        • Makerbot Replicator 2X
                        • Lulzbot Mini
                        • Original Pursa I3
                        • Creality CR-10
                        • Solidoodle 3
                        • UFO Standard (Delta & E3D hot-end)
                        • Rapidbot 2

                        Companies who are interested in having their 3D printer(s) featured in our testlab can contact us at support@botfeeder.ca


                        Care

                        Storing Your Filament

                        Please note that improper storage may damage your filament. To maintain its original quality, it's strongly recommended that the filament be stored in the following conditions:

                        • A dehumidifier cabinet or a dry and circulated area
                        • Room temperature
                        • Avoid direct sunlight or heat source

                        Selecting A Printer Location

                        Please note poor printer location will have a negative effect on your print result and possible of damaging your filament. To select the most ideal location for your printer, please follow this guide.

                        • Consistent temperature
                        • Stable air flow
                        • Away from furniture for safety

                        Avoid Tangling Your Filament

                        When unpacking, changing filament or unloading, It is strongly suggested to get a good grip at the end of the filament at all times in order to prevent tangling. The spool holder is specifically designed with 2 holes of each side, allowing you to secure the end of the filament by threading into it. or you can simply 3D print a "Filament clip" that is attached to the spool holder itself.


                        BotFeeder PLA Colour Code & Filament Tracker


                        If Filament Gets Damp

                        Dry it slowly in room temperature. Please note that heat drying the filament will damages its quality by making it become brittle. The preferred method of drying your filament is to put in a dehumidifier cabinet or in an airtight bag with a few packs of desiccants. It's recommended to maintain a humidity level of 25% or less.

                        Certifications

                        To take an extra step for your safety, BotFeeder 3D Printer Filaments are being tested on an annually basis by SGS. On top of that, all our filaments are manufactured in compliance of RoHS (Restriction of Hazardous Substances).  Why is it important?  It basically means the filaments are free from lead and other potentially hazardous substances including cadmium, mercury and chromium VI, among others.


                        SGS Certification


                        Material Science

                        BotFeeder was founded as a brand of Liing Shian Colorant Manufacturer which have been active in the masterbatch, and pigment & chemical auxiliaries for the plastics processing industry. Our knowhow, network and partnerships is driving material innovations and quality. You can expect BotFeeder to keep on developing interesting new materials, which will be tested on a variety of printers to make sure it’ll get the job done.

                          Sold Out
                          1kg PLA Filament 1.75mm – Caramel

                          BotFeeder Original PLA Filament

                          Kids Friendly
                          Minimized VOC Emissions
                          0 Toxic Additive Added
                          ~100% PLA
                          Compatible with most 3D printers on the market


                          Health Check

                          If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                          • Eye, nose and throat irritation
                          • Headache, loss of concentration and nausea
                          • Allergic skin reaction
                          • Dizziness
                            Temp. & Tips

                            At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                            Our Setting Profile

                            3D printer type: delta
                            Nozzle size: 0.30 mm
                            Resolution: 0.10 mm
                            Extrusion temperature: 200 C
                            Print bed temperature: 65 C
                            Print speed: 65 mm/sec (default speed)
                            Adhesion type: brim
                            Retraction distance: 4.5 mm
                            Retraction speed: 100 mm/sec
                            Prime: no
                            Support infill: 15%
                            Support pattern: zig zag
                            Support angle: 50 degree
                            Dense support layer: 2
                            Dense Infill: 60%
                            Upper separation layer: 1 to 2 (or 0.20 mm)
                            Lower separation layer: 1 to 2 (or 0.20 mm)


                            Printing Notes

                            1. Extrusion Temperature: 200 to 220C
                            2. Print Bed Temperature: 60 to 70C (optional)
                            3. If you are printing white at 200C, black will require ~5 degree more.
                            4. Metallic should be printing with black setting.
                            5. Transparent needs the less energy to extrude.
                            6. Retraction settings: 4.5 mm @ 100 mm/sec.
                            7. Let print bed cool down to room temperature before removing your print.
                            8. Works great on glass platform, PEI, blue tape, buildtak, and kapton tape.
                            9. Adhesion solution: hair spray, ABS juice, and glue stick.
                            10. Can be printed without heated print bed.
                            11. If wrapping occurs, print using raft.
                            12. First layer usually 5 to 10 C higher than subsequent layers.
                            13. First layer usually print at 35mm/sec or slower.
                            14. PLA absorbs heat and so benefits from additional active cooling.
                            15. PLA adsorbs moisture.  Un-used spool should store in container or plastic bag.
                            16. Use sandpaper to smooth out the print.
                            17. Can be painted with acrylic without post processing.
                            18. Can also read our article on how to print with BotFeeder PLA

                            Materials Quality

                            Material Grade: NatureWorks 4032D
                            Filament Diameter: 1.75mm
                            Diameter Tolerance: +/- 0.03mm
                            Roundness Tolerance: +/- 0.05mm
                            Filament Weight: 1kg (700g for metallic & silky pearl)
                            Spool Length x Width: 190mm x 85mm
                            Spool Hole Diameter: 38mm
                            Spool Weight: 500g

                            BotFeeder PLA Black Filament Dimension


                            BotFeeder Original PLA is Made to Perfection.


                            Raw Material

                            The premium PLA grade is selected based on providing the safest printing experience. All virgin PLA pellets are supplied by NatureWorks LLC, a globally well-known company manufactures Ingeo brand polylactic acid (PLA).


                            Natural Color Pigment

                            All color pigments are extracted from nature. NOT chemical engineered pigment.  During the process of 3D printing, you'll noticed a pleasant sweet scent in the air.


                            Filtration Treatment

                            Before production, all PLA pellets and color pigments undergo a filtration process to remove any larger particles that might clogged the nozzle during printing.


                            Anti-Moist Treatment

                            All raw materials have undergone dying treatment before production, as the practice of which prevents 'bubbles' occurrence during extrusion due to moisture content within the raw materials.


                            Coloring Masterbatch

                            Identical colors from spool to spool.


                            Diameter Control

                            An important machine in our production are the laser measurement systems used to check the diameter of our filament real time during production. It’s measured over 1000 times per second and helps us guarantee that each spool of BotFeeder 3d printing filament produced within tolerance. We can guarantee 0.03mm +/- on both 2.90mm and 1.75mm BotFeeder 3D Printer Filament, which means you can rest assured that your printer is extruding the exact amount of material.


                            Enhanced Spool Holder

                            In combination with a specially design spool and stronger material the BotFeeder spool is able to withstand the impact from dropping on the floor. From an in-house test, a typical 1kg spool of filament did not break/snap after 12 drops.


                            Vacuum Sealed Packaging

                            Within minutes of production a spool of BotFeeder 3d printing filament is wrapped with a protective film and then sealed airtight with a double barrier foil. To ensure minimal moisture, we upgraded to a large pack of desiccant.  To go the extra mile, we’ll also seal the fancy cardboard box that we use to ship our product. You can make sure BotFeeder 3d printing filament is fresh and ready for 3d printing when you’re done unboxing.


                            BotFeeder Filament Packaging


                            In-House Production

                            All BotFeeder 3D Printer Filaments are produced in our own production facility, situated in the Taiwan. Since no external parties are involved in the making of BotFeeder filament we can ensure consistent quality on every order.


                            In-House Testing

                            The BotFeeder Testlab features a wide range of popular 3D printers. We’re continuously testing on our 3D printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community. If your not sure how to print with our materials on your 3D printer, please contact us at support@botfeeder.ca


                            The following printers are used in our lab

                            • Ultimaker Original
                            • Ultimaker 2
                            • Makerbot Replicator 2X
                            • Lulzbot Mini
                            • Original Pursa I3
                            • Creality CR-10
                            • Solidoodle 3
                            • UFO Standard (Delta & E3D hot-end)
                            • Rapidbot 2

                            Companies who are interested in having their 3D printer(s) featured in our testlab can contact us at support@botfeeder.ca


                            Care

                            Storing Your Filament

                            Please note that improper storage may damage your filament. To maintain its original quality, it's strongly recommended that the filament be stored in the following conditions:

                            • A dehumidifier cabinet or a dry and circulated area
                            • Room temperature
                            • Avoid direct sunlight or heat source

                            Selecting A Printer Location

                            Please note poor printer location will have a negative effect on your print result and possible of damaging your filament. To select the most ideal location for your printer, please follow this guide.

                            • Consistent temperature
                            • Stable air flow
                            • Away from furniture for safety

                            Avoid Tangling Your Filament

                            When unpacking, changing filament or unloading, It is strongly suggested to get a good grip at the end of the filament at all times in order to prevent tangling. The spool holder is specifically designed with 2 holes of each side, allowing you to secure the end of the filament by threading into it. or you can simply 3D print a "Filament clip" that is attached to the spool holder itself.


                            BotFeeder PLA Colour Code & Filament Tracker


                            If Filament Gets Damp

                            Dry it slowly in room temperature. Please note that heat drying the filament will damages its quality by making it become brittle. The preferred method of drying your filament is to put in a dehumidifier cabinet or in an airtight bag with a few packs of desiccants. It's recommended to maintain a humidity level of 25% or less.

                            Certifications

                            To take an extra step for your safety, BotFeeder 3D Printer Filaments are being tested on an annually basis by SGS. On top of that, all our filaments are manufactured in compliance of RoHS (Restriction of Hazardous Substances).  Why is it important?  It basically means the filaments are free from lead and other potentially hazardous substances including cadmium, mercury and chromium VI, among others.


                            SGS Certification


                            Material Science

                            BotFeeder was founded as a brand of Liing Shian Colorant Manufacturer which have been active in the masterbatch, and pigment & chemical auxiliaries for the plastics processing industry. Our knowhow, network and partnerships is driving material innovations and quality. You can expect BotFeeder to keep on developing interesting new materials, which will be tested on a variety of printers to make sure it’ll get the job done.

                              $35.00 CAD
                              1kg ABS Filament 1.75mm – Silver

                              BotFeeder Original ABS Filament

                              Engineer Grade
                              Toughness
                              Durable
                              Impact Resistance
                              Heat Resistance
                              Weatherproof
                              Outdoor & Indoor
                              Compatible with most 3D printers on the market

                              Temp. & Tips

                              At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                              This profile is optimized based on UFO 3D Printer. A good reference point of where to start.
                              3D printer type: delta
                              Nozzle size: 0.30 mm
                              Resolution: 0.10 mm
                              Extrusion temperature: 250 C
                              Print bed temperature: 110 C
                              Print speed: 65 mm/sec (default speed)
                              Adhesion type: brim
                              Retraction distance: 4.5 mm
                              Retraction speed: 100 mm/sec
                              Prime: no
                              Support infill: 15%
                              Support pattern: zig zag
                              Support angle: 50 degree
                              Dense support layer: 2
                              Dense Infill: 60%
                              Upper separation layer: 1 to 2 (or 0.20 mm)
                              Lower separation layer: 1 to 2 (or 0.20 mm)


                              Printing Notes

                              1. Extrusion Temperature: 250 to 260C
                              2. Print Bed Temperature: 110 to 120C
                              3. If you are printing white at 250C, black will require ~5 degree more.
                              4. Let print bed cool down to room temperature before removing your print.
                              5. Must print with heated print bed.
                              6. Works great on glass platform, PEI, blue tape, buildtak, and kapton tape.
                              7. Adhesion solution: hair spray, ABS juice, and glue stick
                              8. If wrapping occurs, print using raft.
                              9. Enclosure improves print quality.
                              10. First layer usually 5 to 10 C higher than subsequent layers.
                              11. First layer usually print at 35mm/sec or slower.
                              12. ABS absorbs heat and so benefits from additional active cooling.
                              13. ABS adsorbs ~5% of moisture.  Un-used spool should store in container or plastic bag.
                              14. Use Acetone to smooth out the print.
                              15. Sand the print down with 300-grit sandpaper before acrylic painting.
                              16. Longer life span compared to PLA.
                              17. More flexible compared to PLA.
                              18. Can also read article on how to print with BotFeeder ABS
                              Materials Quality

                              Material Grade: Chi Mei Polylac PA-747
                              Filament Diameter: 1.75mm or 2.90mm
                              Diameter Tolerance: +/- 0.03mm
                              Roundness Tolerance: +/- 0.05mm
                              Filament Weight: 1kg
                              Spool Length x Width: 190mm x 85mm
                              Spool Hole Diameter: 38mm
                              Spool Weight: 500g


                              BotFeeder Original ABS is Made to Perfection.


                              Raw Material

                              The premium ABS grade is selected based on providing engineering needs. All virgin ABS pellets are supplied by Chi Mei Corp. a globally well-known company manufactures polylac (ABS).


                              Natural Color Pigment

                              All color pigments are extracted from nature. NOT chemical engineered pigment.  During the process of 3D printing, you'll noticed a pleasant sweet scent in the air.


                              Filtration Treatment

                              Before production, all ABS pellets and color pigments undergo a filtration process to remove any larger particles that might clogged the nozzle during printing.


                              Anti-Moist Treatment

                              All raw materials have undergone dying treatment before production, as the practice of which prevents 'bubbles' occurrence during extrusion due to moisture content within the raw materials.


                              Coloring Masterbatch

                              Identical colors from spool to spool.


                              Diameter Control

                              An important machine in our production are the laser measurement systems used to check the diameter of our filament real time during production. It’s measured over 1000 times per second and helps us guarantee that each spool of BotFeeder 3d printing filament produced within tolerance. We can guarantee 0.03mm +/- on both 2.90mm and 1.75mm BotFeeder 3D Printer Filament, which means you can rest assured that your printer is extruding the exact amount of material.


                              Enhanced Spool Holder

                              In combination with a specially design spool and stronger material the BotFeeder spool is able to withstand the impact from dropping on the floor. From an in-house test, a typical 1kg spool of filament did not break/snap after 12 drops.


                              Vacuum Sealed Packaging

                              Within minutes of production a spool of BotFeeder 3d printing filament is wrapped with a protective film and then sealed airtight with a double barrier foil. To ensure minimal moisture, we upgraded to a large pack of desiccant.  To go the extra mile, we’ll also seal the fancy cardboard box that we use to ship our product. You can make sure BotFeeder 3d printing filament is fresh and ready for 3d printing when you’re done unboxing.


                              BotFeeder Filament Packaging


                              In-House Production

                              All BotFeeder 3D Printer Filaments are produced in our own production facility, situated in the Taiwan. Since no external parties are involved in the making of BotFeeder filament we can ensure consistent quality on every order.


                              In-House Testing

                              The BotFeeder Testlab features a wide range of popular 3D printers. We’re continuously testing on our 3D printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community. If your not sure how to print with our materials on your 3D printer, please contact us at support@botfeeder.ca


                              The following printers are used in our lab

                              • Ultimaker Original
                              • Ultimaker 2
                              • Makerbot Replicator 2X
                              • Lulzbot Mini
                              • Original Pursa I3
                              • Creality CR-10
                              • Solidoodle 3
                              • UFO Standard (Delta & E3D hot-end)
                              • Rapidbot 2

                              Companies who are interested in having their 3D printer(s) featured in our testlab can contact us at support@botfeeder.ca


                              Care

                              Storing Your Filament

                              Please note that improper storage may damage your filament. To maintain its original quality, it's strongly recommended that the filament be stored in the following conditions:

                              • A dehumidifier cabinet or a dry and circulated area
                              • Room temperature
                              • Avoid direct sunlight or heat source

                              Selecting A Printer Location

                              Please note poor printer location will have a negative effect on your print result and possible of damaging your filament. To select the most ideal location for your printer, please follow this guide.

                              • Consistent temperature
                              • Stable air flow
                              • Away from furniture for safety

                              Avoid Tangling Your Filament

                              When unpacking, changing filament or unloading, It is strongly suggested to get a good grip at the end of the filament at all times in order to prevent tangling. The spool holder is specifically designed with 2 holes of each side, allowing you to secure the end of the filament by threading into it. or you can simply 3D print a "Filament clip" that is attached to the spool holder itself.


                              BotFeeder PLA Colour Code & Filament Tracker


                              If Filament Gets Damp

                              Dry it slowly in room temperature. Please note that heat drying the filament will damages its quality by making it become brittle. The preferred method of drying your filament is to put in a dehumidifier cabinet or in an airtight bag with a few packs of desiccants. It's recommended to maintain a humidity level of 25% or less.

                              Certifications

                              To take an extra step for your safety, BotFeeder 3D Printer Filaments are being tested on an annually basis by SGS. On top of that, all our filaments are manufactured in compliance of RoHS (Restriction of Hazardous Substances).  Why is it important?  It basically means the filaments are free from lead and other potentially hazardous substances including cadmium, mercury and chromium VI, among others.


                              SGS Certification


                              Material Science

                              BotFeeder was founded as a brand of Liing Shian Colorant Manufacturer which have been active in the masterbatch, and pigment & chemical auxiliaries for the plastics processing industry. Our knowhow, network and partnerships is driving material innovations and quality. You can expect BotFeeder to keep on developing interesting new materials, which will be tested on a variety of printers to make sure it’ll get the job done.

                                $35.00 CAD
                                700g PLA Filament 1.75mm – Metallic Gold

                                BotFeeder Original PLA Filament

                                Kids Friendly
                                Minimized VOC Emissions
                                0 Toxic Additive Added
                                ~100% PLA
                                Compatible with most 3D printers on the market


                                Health Check

                                If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                                • Eye, nose and throat irritation
                                • Headache, loss of concentration and nausea
                                • Allergic skin reaction
                                • Dizziness
                                  Temp. & Tips

                                  At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                  Our Setting Profile

                                  3D printer type: delta
                                  Nozzle size: 0.30 mm
                                  Resolution: 0.10 mm
                                  Extrusion temperature: 200 C
                                  Print bed temperature: 65 C
                                  Print speed: 65 mm/sec (default speed)
                                  Adhesion type: brim
                                  Retraction distance: 4.5 mm
                                  Retraction speed: 100 mm/sec
                                  Prime: no
                                  Support infill: 15%
                                  Support pattern: zig zag
                                  Support angle: 50 degree
                                  Dense support layer: 2
                                  Dense Infill: 60%
                                  Upper separation layer: 1 to 2 (or 0.20 mm)
                                  Lower separation layer: 1 to 2 (or 0.20 mm)


                                  Printing Notes

                                  1. Extrusion Temperature: 200 to 220C
                                  2. Print Bed Temperature: 60 to 70C (optional)
                                  3. If you are printing white at 200C, black will require ~5 degree more.
                                  4. Metallic should be printing with black setting.
                                  5. Transparent needs the less energy to extrude.
                                  6. Retraction settings: 4.5 mm @ 100 mm/sec.
                                  7. Let print bed cool down to room temperature before removing your print.
                                  8. Works great on glass platform, PEI, blue tape, buildtak, and kapton tape.
                                  9. Adhesion solution: hair spray, ABS juice, and glue stick.
                                  10. Can be printed without heated print bed.
                                  11. If wrapping occurs, print using raft.
                                  12. First layer usually 5 to 10 C higher than subsequent layers.
                                  13. First layer usually print at 35mm/sec or slower.
                                  14. PLA absorbs heat and so benefits from additional active cooling.
                                  15. PLA adsorbs moisture.  Un-used spool should store in container or plastic bag.
                                  16. Use sandpaper to smooth out the print.
                                  17. Can be painted with acrylic without post processing.
                                  18. Can also read our article on how to print with BotFeeder PLA

                                  Materials Quality

                                  Material Grade: NatureWorks 4032D
                                  Filament Diameter: 1.75mm
                                  Diameter Tolerance: +/- 0.03mm
                                  Roundness Tolerance: +/- 0.05mm
                                  Filament Weight: 1kg (700g for metallic & silky pearl)
                                  Spool Length x Width: 190mm x 85mm
                                  Spool Hole Diameter: 38mm
                                  Spool Weight: 500g

                                  BotFeeder PLA Black Filament Dimension


                                  BotFeeder Original PLA is Made to Perfection.


                                  Raw Material

                                  The premium PLA grade is selected based on providing the safest printing experience. All virgin PLA pellets are supplied by NatureWorks LLC, a globally well-known company manufactures Ingeo brand polylactic acid (PLA).


                                  Natural Color Pigment

                                  All color pigments are extracted from nature. NOT chemical engineered pigment.  During the process of 3D printing, you'll noticed a pleasant sweet scent in the air.


                                  Filtration Treatment

                                  Before production, all PLA pellets and color pigments undergo a filtration process to remove any larger particles that might clogged the nozzle during printing.


                                  Anti-Moist Treatment

                                  All raw materials have undergone dying treatment before production, as the practice of which prevents 'bubbles' occurrence during extrusion due to moisture content within the raw materials.


                                  Coloring Masterbatch

                                  Identical colors from spool to spool.


                                  Diameter Control

                                  An important machine in our production are the laser measurement systems used to check the diameter of our filament real time during production. It’s measured over 1000 times per second and helps us guarantee that each spool of BotFeeder 3d printing filament produced within tolerance. We can guarantee 0.03mm +/- on both 2.90mm and 1.75mm BotFeeder 3D Printer Filament, which means you can rest assured that your printer is extruding the exact amount of material.


                                  Enhanced Spool Holder

                                  In combination with a specially design spool and stronger material the BotFeeder spool is able to withstand the impact from dropping on the floor. From an in-house test, a typical 1kg spool of filament did not break/snap after 12 drops.


                                  Vacuum Sealed Packaging

                                  Within minutes of production a spool of BotFeeder 3d printing filament is wrapped with a protective film and then sealed airtight with a double barrier foil. To ensure minimal moisture, we upgraded to a large pack of desiccant.  To go the extra mile, we’ll also seal the fancy cardboard box that we use to ship our product. You can make sure BotFeeder 3d printing filament is fresh and ready for 3d printing when you’re done unboxing.


                                  BotFeeder Filament Packaging


                                  In-House Production

                                  All BotFeeder 3D Printer Filaments are produced in our own production facility, situated in the Taiwan. Since no external parties are involved in the making of BotFeeder filament we can ensure consistent quality on every order.


                                  In-House Testing

                                  The BotFeeder Testlab features a wide range of popular 3D printers. We’re continuously testing on our 3D printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community. If your not sure how to print with our materials on your 3D printer, please contact us at support@botfeeder.ca


                                  The following printers are used in our lab

                                  • Ultimaker Original
                                  • Ultimaker 2
                                  • Makerbot Replicator 2X
                                  • Lulzbot Mini
                                  • Original Pursa I3
                                  • Creality CR-10
                                  • Solidoodle 3
                                  • UFO Standard (Delta & E3D hot-end)
                                  • Rapidbot 2

                                  Companies who are interested in having their 3D printer(s) featured in our testlab can contact us at support@botfeeder.ca


                                  Care

                                  Storing Your Filament

                                  Please note that improper storage may damage your filament. To maintain its original quality, it's strongly recommended that the filament be stored in the following conditions:

                                  • A dehumidifier cabinet or a dry and circulated area
                                  • Room temperature
                                  • Avoid direct sunlight or heat source

                                  Selecting A Printer Location

                                  Please note poor printer location will have a negative effect on your print result and possible of damaging your filament. To select the most ideal location for your printer, please follow this guide.

                                  • Consistent temperature
                                  • Stable air flow
                                  • Away from furniture for safety

                                  Avoid Tangling Your Filament

                                  When unpacking, changing filament or unloading, It is strongly suggested to get a good grip at the end of the filament at all times in order to prevent tangling. The spool holder is specifically designed with 2 holes of each side, allowing you to secure the end of the filament by threading into it. or you can simply 3D print a "Filament clip" that is attached to the spool holder itself.


                                  BotFeeder PLA Colour Code & Filament Tracker


                                  If Filament Gets Damp

                                  Dry it slowly in room temperature. Please note that heat drying the filament will damages its quality by making it become brittle. The preferred method of drying your filament is to put in a dehumidifier cabinet or in an airtight bag with a few packs of desiccants. It's recommended to maintain a humidity level of 25% or less.

                                  Certifications

                                  To take an extra step for your safety, BotFeeder 3D Printer Filaments are being tested on an annually basis by SGS. On top of that, all our filaments are manufactured in compliance of RoHS (Restriction of Hazardous Substances).  Why is it important?  It basically means the filaments are free from lead and other potentially hazardous substances including cadmium, mercury and chromium VI, among others.


                                  SGS Certification


                                  Material Science

                                  BotFeeder was founded as a brand of Liing Shian Colorant Manufacturer which have been active in the masterbatch, and pigment & chemical auxiliaries for the plastics processing industry. Our knowhow, network and partnerships is driving material innovations and quality. You can expect BotFeeder to keep on developing interesting new materials, which will be tested on a variety of printers to make sure it’ll get the job done.

                                    $35.00 CAD
                                    1kg PLA Filament 1.75mm – Macaron Pink

                                    BotFeeder Original PLA Filament

                                    Kids Friendly
                                    Minimized VOC Emissions
                                    0 Toxic Additive Added
                                    ~100% PLA
                                    Compatible with most 3D printers on the market


                                    Health Check

                                    If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                                    • Eye, nose and throat irritation
                                    • Headache, loss of concentration and nausea
                                    • Allergic skin reaction
                                    • Dizziness
                                      Temp. & Tips

                                      At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                      Our Setting Profile

                                      3D printer type: delta
                                      Nozzle size: 0.30 mm
                                      Resolution: 0.10 mm
                                      Extrusion temperature: 200 C
                                      Print bed temperature: 65 C
                                      Print speed: 65 mm/sec (default speed)
                                      Adhesion type: brim
                                      Retraction distance: 4.5 mm
                                      Retraction speed: 100 mm/sec
                                      Prime: no
                                      Support infill: 15%
                                      Support pattern: zig zag
                                      Support angle: 50 degree
                                      Dense support layer: 2
                                      Dense Infill: 60%
                                      Upper separation layer: 1 to 2 (or 0.20 mm)
                                      Lower separation layer: 1 to 2 (or 0.20 mm)


                                      Printing Notes

                                      1. Extrusion Temperature: 200 to 220C
                                      2. Print Bed Temperature: 60 to 70C (optional)
                                      3. If you are printing white at 200C, black will require ~5 degree more.
                                      4. Metallic should be printing with black setting.
                                      5. Transparent needs the less energy to extrude.
                                      6. Retraction settings: 4.5 mm @ 100 mm/sec.
                                      7. Let print bed cool down to room temperature before removing your print.
                                      8. Works great on glass platform, PEI, blue tape, buildtak, and kapton tape.
                                      9. Adhesion solution: hair spray, ABS juice, and glue stick.
                                      10. Can be printed without heated print bed.
                                      11. If wrapping occurs, print using raft.
                                      12. First layer usually 5 to 10 C higher than subsequent layers.
                                      13. First layer usually print at 35mm/sec or slower.
                                      14. PLA absorbs heat and so benefits from additional active cooling.
                                      15. PLA adsorbs moisture.  Un-used spool should store in container or plastic bag.
                                      16. Use sandpaper to smooth out the print.
                                      17. Can be painted with acrylic without post processing.
                                      18. Can also read our article on how to print with BotFeeder PLA

                                      Materials Quality

                                      Material Grade: NatureWorks 4032D
                                      Filament Diameter: 1.75mm
                                      Diameter Tolerance: +/- 0.03mm
                                      Roundness Tolerance: +/- 0.05mm
                                      Filament Weight: 1kg (700g for metallic & silky pearl)
                                      Spool Length x Width: 190mm x 85mm
                                      Spool Hole Diameter: 38mm
                                      Spool Weight: 500g

                                      BotFeeder PLA Black Filament Dimension


                                      BotFeeder Original PLA is Made to Perfection.


                                      Raw Material

                                      The premium PLA grade is selected based on providing the safest printing experience. All virgin PLA pellets are supplied by NatureWorks LLC, a globally well-known company manufactures Ingeo brand polylactic acid (PLA).


                                      Natural Color Pigment

                                      All color pigments are extracted from nature. NOT chemical engineered pigment.  During the process of 3D printing, you'll noticed a pleasant sweet scent in the air.


                                      Filtration Treatment

                                      Before production, all PLA pellets and color pigments undergo a filtration process to remove any larger particles that might clogged the nozzle during printing.


                                      Anti-Moist Treatment

                                      All raw materials have undergone dying treatment before production, as the practice of which prevents 'bubbles' occurrence during extrusion due to moisture content within the raw materials.


                                      Coloring Masterbatch

                                      Identical colors from spool to spool.


                                      Diameter Control

                                      An important machine in our production are the laser measurement systems used to check the diameter of our filament real time during production. It’s measured over 1000 times per second and helps us guarantee that each spool of BotFeeder 3d printing filament produced within tolerance. We can guarantee 0.03mm +/- on both 2.90mm and 1.75mm BotFeeder 3D Printer Filament, which means you can rest assured that your printer is extruding the exact amount of material.


                                      Enhanced Spool Holder

                                      In combination with a specially design spool and stronger material the BotFeeder spool is able to withstand the impact from dropping on the floor. From an in-house test, a typical 1kg spool of filament did not break/snap after 12 drops.


                                      Vacuum Sealed Packaging

                                      Within minutes of production a spool of BotFeeder 3d printing filament is wrapped with a protective film and then sealed airtight with a double barrier foil. To ensure minimal moisture, we upgraded to a large pack of desiccant.  To go the extra mile, we’ll also seal the fancy cardboard box that we use to ship our product. You can make sure BotFeeder 3d printing filament is fresh and ready for 3d printing when you’re done unboxing.


                                      BotFeeder Filament Packaging


                                      In-House Production

                                      All BotFeeder 3D Printer Filaments are produced in our own production facility, situated in the Taiwan. Since no external parties are involved in the making of BotFeeder filament we can ensure consistent quality on every order.


                                      In-House Testing

                                      The BotFeeder Testlab features a wide range of popular 3D printers. We’re continuously testing on our 3D printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community. If your not sure how to print with our materials on your 3D printer, please contact us at support@botfeeder.ca


                                      The following printers are used in our lab

                                      • Ultimaker Original
                                      • Ultimaker 2
                                      • Makerbot Replicator 2X
                                      • Lulzbot Mini
                                      • Original Pursa I3
                                      • Creality CR-10
                                      • Solidoodle 3
                                      • UFO Standard (Delta & E3D hot-end)
                                      • Rapidbot 2

                                      Companies who are interested in having their 3D printer(s) featured in our testlab can contact us at support@botfeeder.ca


                                      Care

                                      Storing Your Filament

                                      Please note that improper storage may damage your filament. To maintain its original quality, it's strongly recommended that the filament be stored in the following conditions:

                                      • A dehumidifier cabinet or a dry and circulated area
                                      • Room temperature
                                      • Avoid direct sunlight or heat source

                                      Selecting A Printer Location

                                      Please note poor printer location will have a negative effect on your print result and possible of damaging your filament. To select the most ideal location for your printer, please follow this guide.

                                      • Consistent temperature
                                      • Stable air flow
                                      • Away from furniture for safety

                                      Avoid Tangling Your Filament

                                      When unpacking, changing filament or unloading, It is strongly suggested to get a good grip at the end of the filament at all times in order to prevent tangling. The spool holder is specifically designed with 2 holes of each side, allowing you to secure the end of the filament by threading into it. or you can simply 3D print a "Filament clip" that is attached to the spool holder itself.


                                      BotFeeder PLA Colour Code & Filament Tracker


                                      If Filament Gets Damp

                                      Dry it slowly in room temperature. Please note that heat drying the filament will damages its quality by making it become brittle. The preferred method of drying your filament is to put in a dehumidifier cabinet or in an airtight bag with a few packs of desiccants. It's recommended to maintain a humidity level of 25% or less.

                                      Certifications

                                      To take an extra step for your safety, BotFeeder 3D Printer Filaments are being tested on an annually basis by SGS. On top of that, all our filaments are manufactured in compliance of RoHS (Restriction of Hazardous Substances).  Why is it important?  It basically means the filaments are free from lead and other potentially hazardous substances including cadmium, mercury and chromium VI, among others.


                                      SGS Certification


                                      Material Science

                                      BotFeeder was founded as a brand of Liing Shian Colorant Manufacturer which have been active in the masterbatch, and pigment & chemical auxiliaries for the plastics processing industry. Our knowhow, network and partnerships is driving material innovations and quality. You can expect BotFeeder to keep on developing interesting new materials, which will be tested on a variety of printers to make sure it’ll get the job done.

                                        $35.00 CAD