FIGHT COVID-19

.

Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.


  • Kids-friendly; low VOC
  • Easy to use
  • More brittle than ABS
  • Smooth with sandpaper
  • Paints with acrylic
  • Compatible with most desktop 3D printers
  • Certified by SGS
  • Backed by our 15 days warranty

If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


Health Check

If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

  • Eye, nose and throat irritation
  • Headache, loss of concentration and nausea
  • Allergic skin reaction
  • Dizziness
    SETTINGS

    At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


    Our Recommendation Settings

    Extrusion temperature: 200 to 220 C
    Print bed temperature: 66 to 70 C (optional)
    Print speed: 30 to 90 mm/sec
    Layer thickness: 0.05 to 0.40 mm


    Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?


    DELIVERY

    > View our full list of delivery rates to the USA and Canada.


    We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.


    For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


    For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.


    15 DAYS WARRANTY

    BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.


    > View more information

      Sold Out

      Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. PLA is made for one purpose: safety. There's nothing more important than your healthy.


      • Kids-friendly; low VOC
      • Easy to use
      • More brittle than ABS; stronger than PURE PLA
      • Smooth with sandpaper
      • Paints with acrylic
      • Compatible with most desktop 3D printers
      • Certified by SGS
      • Backed by our 15 days warranty

      If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


      Health Check

      If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

      • Eye, nose and throat irritation
      • Headache, loss of concentration and nausea
      • Allergic skin reaction
      • Dizziness
        SETTINGS

        At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


        Our Recommendation Settings

        Extrusion temperature: 200 to 220 C
        Print bed temperature: 66 to 70 C (optional)
        Print speed: 30 to 90 mm/sec
        Layer thickness: 0.05 to 0.40 mm


        Access our full printing setting profile, and tricks & tips on printing PLA, check out: How to print with BotFeeder PLA?


        DELIVERY

        > View our full list of delivery rates to the USA and Canada.


        We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.


        For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


        For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.


        15 DAYS WARRANTY

        BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.


        > View more information

          Sold Out

          Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. PLA is made for one purpose: safety. There's nothing more important than your healthy.


          • Kids-friendly; low VOC
          • Easy to use
          • More brittle than ABS
          • Smooth with sandpaper
          • Paints with acrylic
          • Compatible with most desktop 3D printers
          • Certified by SGS
          • Backed by our 15 days warranty

          If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


          Health Check

          If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

          • Eye, nose and throat irritation
          • Headache, loss of concentration and nausea
          • Allergic skin reaction
          • Dizziness
            SETTINGS

            At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


            Our Recommendation Settings

            Extrusion temperature: 200 to 220 C
            Print bed temperature: 66 to 70 C (optional)
            Print speed: 30 to 90 mm/sec
            Layer thickness: 0.05 to 0.40 mm


            Access our full printing setting profile, and tricks & tips on printing PLA, check out: How to print with BotFeeder PLA?


            DELIVERY

            > View our full list of delivery rates to the USA and Canada.


            We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.


            For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


            For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.


            15 DAYS WARRANTY

            BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.


            > View more information

              Sold Out

              Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. PLA is made for one purpose: safety. There's nothing more important than your healthy.


              • Kids-friendly; low VOC
              • Easy to use
              • More brittle than ABS
              • Smooth with sandpaper
              • Paints with acrylic
              • Compatible with most desktop 3D printers
              • Certified by SGS
              • Backed by our 15 days warranty

              If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


              Health Check

              If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

              • Eye, nose and throat irritation
              • Headache, loss of concentration and nausea
              • Allergic skin reaction
              • Dizziness
                SETTINGS

                At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                Our Recommendation Settings

                Extrusion temperature: 200 to 220 C
                Print bed temperature: 66 to 70 C (optional)
                Print speed: 30 to 90 mm/sec
                Layer thickness: 0.05 to 0.40 mm


                Access our full printing setting profile, and tricks & tips on printing PLA, check out: How to print with BotFeeder PLA?


                DELIVERY

                > View our full list of delivery rates to the USA and Canada.


                We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.


                For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.


                15 DAYS WARRANTY

                BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.


                > View more information

                  Sold Out
                  1kg PLA Filament 1.75mm – Macaron Pink

                  Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.


                  • Kids-friendly; low VOC
                  • Easy to use
                  • More brittle than ABS
                  • Smooth with sandpaper
                  • Paints with acrylic
                  • Compatible with most desktop 3D printers
                  • Certified by SGS
                  • Backed by our 15 days warranty

                  If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                  Health Check

                  If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                  • Eye, nose and throat irritation
                  • Headache, loss of concentration and nausea
                  • Allergic skin reaction
                  • Dizziness
                    SETTINGS

                    At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                    Our Recommendation Settings

                    Extrusion temperature: 200 to 220 C
                    Print bed temperature: 66 to 70 C (optional)
                    Print speed: 30 to 90 mm/sec
                    Layer thickness: 0.05 to 0.40 mm


                    Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?


                    DELIVERY

                    > View our full list of delivery rates to the USA and Canada.


                    We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.


                    For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                    For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.


                    15 DAYS WARRANTY

                    BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.


                    > View more information

                      $15.99 CAD
                      1kg PLA Filament 1.75mm – Sky Blue

                      Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.


                      • Kids-friendly; low VOC
                      • Easy to use
                      • More brittle than ABS
                      • Smooth with sandpaper
                      • Paints with acrylic
                      • Compatible with most desktop 3D printers
                      • Certified by SGS
                      • Backed by our 15 days warranty

                      If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                      Health Check

                      If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                      • Eye, nose and throat irritation
                      • Headache, loss of concentration and nausea
                      • Allergic skin reaction
                      • Dizziness
                        SETTINGS

                        At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                        Our Recommendation Settings

                        Extrusion temperature: 200 to 220 C
                        Print bed temperature: 66 to 70 C (optional)
                        Print speed: 30 to 90 mm/sec
                        Layer thickness: 0.05 to 0.40 mm


                        Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?


                        DELIVERY

                        > View our full list of delivery rates to the USA and Canada.


                        We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.


                        For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                        For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.


                        15 DAYS WARRANTY

                        BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.


                        > View more information