.
-40.02%
-40.02%
-40.02%
-40.02%
-40.02%
-40.02%
-40.02%
-40.02%
-40.02%
-40.02%
Items 1 to 10 of 10 total
- Engineer grade
- Easy to use
- Durable & tough
- Impact & heat resistance
- Indoor & outdoor uses
- Compatible with most 3D printers on the market
- Certified by SGS
- Backed by our 15 days warranty
If you're interested in maintaining your filaments in top condition, check out our Filament Care page.
Health Check
If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".
- Eye, nose and throat irritation
- Headache, loss of concentration and nausea
- Allergic skin reaction
- Dizziness
SETTINGS
At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.
Our Recommendation Settings
Extrusion temperature: 250 to 260 C
Print bed temperature: 110 to 120 C
Print speed: 30 to 90 mm/sec
Layer thickness: 0.05 to 0.40 mm
For more tricks and tips, please refer to our page: How to print with BotFeeder ABS?
DELIVERY
> View our full list of delivery rates to the USA and Canada.
We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.
For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.
For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.
15 DAYS WARRANTY
BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.
Sold Out
- Engineer grade
- Easy to use
- Durable & tough
- Impact & heat resistance
- Indoor & outdoor uses
- Compatible with most 3D printers on the market
- Certified by SGS
- Backed by our 15 days warranty
If you're interested in maintaining your filaments in top condition, check out our Filament Care page.
Health Check
If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".
- Eye, nose and throat irritation
- Headache, loss of concentration and nausea
- Allergic skin reaction
- Dizziness
SETTINGS
At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.
Our Recommendation Settings
Extrusion temperature: 250 to 260 C
Print bed temperature: 110 to 120 C
Print speed: 30 to 90 mm/sec
Layer thickness: 0.05 to 0.40 mm
For more tricks and tips, please refer to our page: How to print with BotFeeder ABS?
DELIVERY
> View our full list of delivery rates to the USA and Canada.
We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.
For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.
For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.
15 DAYS WARRANTY
BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.
Sold Out
-
{"id":685655031836,"title":"1kg ABS Filament 2.90mm – Yellow","handle":"1kg-abs-filament-2-90mm-yellow","description":"\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEngineer grade\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEasy to use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDurable \u0026amp; tough\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eImpact \u0026amp; heat resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eIndoor \u0026amp; outdoor uses\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCompatible with most 3D printers on the market\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCertified by SGS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eBacked by our 15 days warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eIf you're interested in maintaining your filaments in top condition, check out our \u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!product-care\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eFilament Care page\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eHealth Check\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eIf you are suffering from any of the symptoms below, you might be \"overexposure to VOCs\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEye, nose and throat irritation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eHeadache, loss of concentration and nausea\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eAllergic skin reaction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDizziness\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eSETTINGS\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eAt BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eOur Recommendation Settings\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eExtrusion temperature: 250 to 260 C\u003cbr\u003e Print bed temperature: 110 to 120 C\u003cbr\u003e Print speed: 30 to 90 mm\/sec\u003cbr\u003e Layer thickness: 0.05 to 0.40 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eFor more tricks and tips, please refer to our page: \u003ca href=\"https:\/\/botfeeder.ca\/blogs\/tips-tricks-and-guides\/how-to-print-with-botfeeder-abs\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eHow to print with BotFeeder ABS?\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eDELIVERY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!shipping-delivery\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View our full list of delivery rates to the USA and Canada.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eWe usually dispatch orders sam day or the next working day. Delivery time vary based on selected service and destination.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003e15 DAYS WARRANTY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eBotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!60-days-warranty\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View more information\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","published_at":"2017-09-16T16:20:53-04:00","created_at":"2018-03-23T12:53:33-04:00","vendor":"BotFeeder","type":"ABS","tags":["1kg","2.90mm","3D Printer Filament","700g to 1kg","ABS","For Fun","For Work","Opaque","Yellow"],"price":1499,"price_min":1499,"price_max":1499,"available":true,"price_varies":false,"compare_at_price":2499,"compare_at_price_min":2499,"compare_at_price_max":2499,"compare_at_price_varies":false,"variants":[{"id":8026621968412,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1450","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"1kg ABS Filament 2.90mm – Yellow","public_title":null,"options":["Default Title"],"price":1499,"weight":1670,"compare_at_price":2499,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentYellow2.90mm.jpg?v=1590254049","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Yellow_BoFee_Bear_5fc8152a-55d5-44f2-8ff0-e406f1c4879b.jpeg?v=1590254049","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_41394db5-8769-4028-a6fe-e38e86861f6c.jpeg?v=1590254049","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_d2abd78d-8fbb-4b8e-9e9e-05d83319bc91.jpeg?v=1590254049","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_ba0ca922-4bdc-45dd-8144-e12788c4c922.jpeg?v=1590254049"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentYellow2.90mm.jpg?v=1590254049","options":["Title"],"media":[{"alt":null,"id":9111828103318,"position":1,"preview_image":{"aspect_ratio":1.0,"height":475,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentYellow2.90mm.jpg?v=1590254048"},"aspect_ratio":1.0,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentYellow2.90mm.jpg?v=1590254048","width":475},{"alt":null,"id":751927296090,"position":2,"preview_image":{"aspect_ratio":1.0,"height":475,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Yellow_BoFee_Bear_5fc8152a-55d5-44f2-8ff0-e406f1c4879b.jpeg?v=1569043923"},"aspect_ratio":1.0,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Yellow_BoFee_Bear_5fc8152a-55d5-44f2-8ff0-e406f1c4879b.jpeg?v=1569043923","width":475},{"alt":null,"id":772717805658,"position":3,"preview_image":{"aspect_ratio":0.992,"height":475,"width":471,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_41394db5-8769-4028-a6fe-e38e86861f6c.jpeg?v=1569047864"},"aspect_ratio":0.992,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_41394db5-8769-4028-a6fe-e38e86861f6c.jpeg?v=1569047864","width":471},{"alt":null,"id":772717477978,"position":4,"preview_image":{"aspect_ratio":1.015,"height":468,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_d2abd78d-8fbb-4b8e-9e9e-05d83319bc91.jpeg?v=1569047864"},"aspect_ratio":1.015,"height":468,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_d2abd78d-8fbb-4b8e-9e9e-05d83319bc91.jpeg?v=1569047864","width":475},{"alt":null,"id":772717838426,"position":5,"preview_image":{"aspect_ratio":0.488,"height":475,"width":232,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_ba0ca922-4bdc-45dd-8144-e12788c4c922.jpeg?v=1569047864"},"aspect_ratio":0.488,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_ba0ca922-4bdc-45dd-8144-e12788c4c922.jpeg?v=1569047864","width":232}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEngineer grade\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEasy to use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDurable \u0026amp; tough\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eImpact \u0026amp; heat resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eIndoor \u0026amp; outdoor uses\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCompatible with most 3D printers on the market\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCertified by SGS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eBacked by our 15 days warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eIf you're interested in maintaining your filaments in top condition, check out our \u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!product-care\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eFilament Care page\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eHealth Check\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eIf you are suffering from any of the symptoms below, you might be \"overexposure to VOCs\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEye, nose and throat irritation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eHeadache, loss of concentration and nausea\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eAllergic skin reaction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDizziness\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eSETTINGS\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eAt BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eOur Recommendation Settings\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eExtrusion temperature: 250 to 260 C\u003cbr\u003e Print bed temperature: 110 to 120 C\u003cbr\u003e Print speed: 30 to 90 mm\/sec\u003cbr\u003e Layer thickness: 0.05 to 0.40 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eFor more tricks and tips, please refer to our page: \u003ca href=\"https:\/\/botfeeder.ca\/blogs\/tips-tricks-and-guides\/how-to-print-with-botfeeder-abs\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eHow to print with BotFeeder ABS?\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eDELIVERY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!shipping-delivery\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View our full list of delivery rates to the USA and Canada.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eWe usually dispatch orders sam day or the next working day. Delivery time vary based on selected service and destination.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003e15 DAYS WARRANTY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eBotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!60-days-warranty\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View more information\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e"}
- Engineer grade
- Easy to use
- Durable & tough
- Impact & heat resistance
- Indoor & outdoor uses
- Compatible with most 3D printers on the market
- Certified by SGS
- Backed by our 15 days warranty
If you're interested in maintaining your filaments in top condition, check out our Filament Care page.
Health Check
If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".
- Eye, nose and throat irritation
- Headache, loss of concentration and nausea
- Allergic skin reaction
- Dizziness
SETTINGS
At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.
Our Recommendation Settings
Extrusion temperature: 250 to 260 C
Print bed temperature: 110 to 120 C
Print speed: 30 to 90 mm/sec
Layer thickness: 0.05 to 0.40 mm
For more tricks and tips, please refer to our page: How to print with BotFeeder ABS?
DELIVERY
> View our full list of delivery rates to the USA and Canada.
We usually dispatch orders sam day or the next working day. Delivery time vary based on selected service and destination.
For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.
For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.
15 DAYS WARRANTY
BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.
$14.99 CAD
$24.99 CAD
-
{"id":685655031836,"title":"1kg ABS Filament 2.90mm – Yellow","handle":"1kg-abs-filament-2-90mm-yellow","description":"\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEngineer grade\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEasy to use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDurable \u0026amp; tough\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eImpact \u0026amp; heat resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eIndoor \u0026amp; outdoor uses\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCompatible with most 3D printers on the market\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCertified by SGS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eBacked by our 15 days warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eIf you're interested in maintaining your filaments in top condition, check out our \u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!product-care\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eFilament Care page\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eHealth Check\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eIf you are suffering from any of the symptoms below, you might be \"overexposure to VOCs\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEye, nose and throat irritation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eHeadache, loss of concentration and nausea\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eAllergic skin reaction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDizziness\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eSETTINGS\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eAt BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eOur Recommendation Settings\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eExtrusion temperature: 250 to 260 C\u003cbr\u003e Print bed temperature: 110 to 120 C\u003cbr\u003e Print speed: 30 to 90 mm\/sec\u003cbr\u003e Layer thickness: 0.05 to 0.40 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eFor more tricks and tips, please refer to our page: \u003ca href=\"https:\/\/botfeeder.ca\/blogs\/tips-tricks-and-guides\/how-to-print-with-botfeeder-abs\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eHow to print with BotFeeder ABS?\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eDELIVERY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!shipping-delivery\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View our full list of delivery rates to the USA and Canada.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eWe usually dispatch orders sam day or the next working day. Delivery time vary based on selected service and destination.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003e15 DAYS WARRANTY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eBotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!60-days-warranty\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View more information\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","published_at":"2017-09-16T16:20:53-04:00","created_at":"2018-03-23T12:53:33-04:00","vendor":"BotFeeder","type":"ABS","tags":["1kg","2.90mm","3D Printer Filament","700g to 1kg","ABS","For Fun","For Work","Opaque","Yellow"],"price":1499,"price_min":1499,"price_max":1499,"available":true,"price_varies":false,"compare_at_price":2499,"compare_at_price_min":2499,"compare_at_price_max":2499,"compare_at_price_varies":false,"variants":[{"id":8026621968412,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1450","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"1kg ABS Filament 2.90mm – Yellow","public_title":null,"options":["Default Title"],"price":1499,"weight":1670,"compare_at_price":2499,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentYellow2.90mm.jpg?v=1590254049","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Yellow_BoFee_Bear_5fc8152a-55d5-44f2-8ff0-e406f1c4879b.jpeg?v=1590254049","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_41394db5-8769-4028-a6fe-e38e86861f6c.jpeg?v=1590254049","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_d2abd78d-8fbb-4b8e-9e9e-05d83319bc91.jpeg?v=1590254049","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_ba0ca922-4bdc-45dd-8144-e12788c4c922.jpeg?v=1590254049"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentYellow2.90mm.jpg?v=1590254049","options":["Title"],"media":[{"alt":null,"id":9111828103318,"position":1,"preview_image":{"aspect_ratio":1.0,"height":475,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentYellow2.90mm.jpg?v=1590254048"},"aspect_ratio":1.0,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentYellow2.90mm.jpg?v=1590254048","width":475},{"alt":null,"id":751927296090,"position":2,"preview_image":{"aspect_ratio":1.0,"height":475,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Yellow_BoFee_Bear_5fc8152a-55d5-44f2-8ff0-e406f1c4879b.jpeg?v=1569043923"},"aspect_ratio":1.0,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Yellow_BoFee_Bear_5fc8152a-55d5-44f2-8ff0-e406f1c4879b.jpeg?v=1569043923","width":475},{"alt":null,"id":772717805658,"position":3,"preview_image":{"aspect_ratio":0.992,"height":475,"width":471,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_41394db5-8769-4028-a6fe-e38e86861f6c.jpeg?v=1569047864"},"aspect_ratio":0.992,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_41394db5-8769-4028-a6fe-e38e86861f6c.jpeg?v=1569047864","width":471},{"alt":null,"id":772717477978,"position":4,"preview_image":{"aspect_ratio":1.015,"height":468,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_d2abd78d-8fbb-4b8e-9e9e-05d83319bc91.jpeg?v=1569047864"},"aspect_ratio":1.015,"height":468,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_d2abd78d-8fbb-4b8e-9e9e-05d83319bc91.jpeg?v=1569047864","width":475},{"alt":null,"id":772717838426,"position":5,"preview_image":{"aspect_ratio":0.488,"height":475,"width":232,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_ba0ca922-4bdc-45dd-8144-e12788c4c922.jpeg?v=1569047864"},"aspect_ratio":0.488,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_ba0ca922-4bdc-45dd-8144-e12788c4c922.jpeg?v=1569047864","width":232}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEngineer grade\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEasy to use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDurable \u0026amp; tough\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eImpact \u0026amp; heat resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eIndoor \u0026amp; outdoor uses\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCompatible with most 3D printers on the market\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCertified by SGS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eBacked by our 15 days warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eIf you're interested in maintaining your filaments in top condition, check out our \u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!product-care\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eFilament Care page\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eHealth Check\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eIf you are suffering from any of the symptoms below, you might be \"overexposure to VOCs\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEye, nose and throat irritation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eHeadache, loss of concentration and nausea\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eAllergic skin reaction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDizziness\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eSETTINGS\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eAt BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eOur Recommendation Settings\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eExtrusion temperature: 250 to 260 C\u003cbr\u003e Print bed temperature: 110 to 120 C\u003cbr\u003e Print speed: 30 to 90 mm\/sec\u003cbr\u003e Layer thickness: 0.05 to 0.40 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eFor more tricks and tips, please refer to our page: \u003ca href=\"https:\/\/botfeeder.ca\/blogs\/tips-tricks-and-guides\/how-to-print-with-botfeeder-abs\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eHow to print with BotFeeder ABS?\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eDELIVERY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!shipping-delivery\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View our full list of delivery rates to the USA and Canada.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eWe usually dispatch orders sam day or the next working day. Delivery time vary based on selected service and destination.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003e15 DAYS WARRANTY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eBotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!60-days-warranty\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View more information\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e"}
-
{"id":685652672540,"title":"1kg ABS Filament 2.90mm – Silver","handle":"1kg-abs-filament-2-90mm-silver","description":"\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEngineer grade\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEasy to use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDurable \u0026amp; tough\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eImpact \u0026amp; heat resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eIndoor \u0026amp; outdoor uses\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCompatible with most 3D printers on the market\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCertified by SGS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eBacked by our 15 days warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eIf you're interested in maintaining your filaments in top condition, check out our \u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!product-care\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eFilament Care page\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eHealth Check\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eIf you are suffering from any of the symptoms below, you might be \"overexposure to VOCs\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEye, nose and throat irritation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eHeadache, loss of concentration and nausea\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eAllergic skin reaction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDizziness\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eSETTINGS\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eAt BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eOur Recommendation Settings\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eExtrusion temperature: 250 to 260 C\u003cbr\u003e Print bed temperature: 110 to 120 C\u003cbr\u003e Print speed: 30 to 90 mm\/sec\u003cbr\u003e Layer thickness: 0.05 to 0.40 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eFor more tricks and tips, please refer to our page: \u003ca href=\"https:\/\/botfeeder.ca\/blogs\/tips-tricks-and-guides\/how-to-print-with-botfeeder-abs\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eHow to print with BotFeeder ABS?\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eDELIVERY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!shipping-delivery\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View our full list of delivery rates to the USA and Canada.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eWe usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003e15 DAYS WARRANTY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eBotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!60-days-warranty\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View more information\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","published_at":"2017-09-16T16:13:59-04:00","created_at":"2018-03-23T12:51:49-04:00","vendor":"BotFeeder","type":"ABS","tags":["1kg","2.90mm","3D Printer Filament","700g to 1kg","ABS","For Fun","For Work","Opaque","Silver"],"price":1499,"price_min":1499,"price_max":1499,"available":true,"price_varies":false,"compare_at_price":2499,"compare_at_price_min":2499,"compare_at_price_max":2499,"compare_at_price_varies":false,"variants":[{"id":8026619314204,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1150","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"1kg ABS Filament 2.90mm – Silver","public_title":null,"options":["Default Title"],"price":1499,"weight":1670,"compare_at_price":2499,"inventory_quantity":36,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentSilver2.90mm.jpg?v=1590254001","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Silver_BoFee_Bear_1ebc07c4-a4f7-4223-9572-73a1bd50025b.jpeg?v=1590254001","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_b3bde5bb-9356-41bd-9f21-16f1ff26d5b4.jpeg?v=1590254001","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_db5253a1-d4b8-4ca8-8870-dc268f66a1fd.jpeg?v=1590254001","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_72d28992-4f56-4522-bccd-7f12ba9fdd27.jpeg?v=1590254001"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentSilver2.90mm.jpg?v=1590254001","options":["Title"],"media":[{"alt":null,"id":9111827677334,"position":1,"preview_image":{"aspect_ratio":1.0,"height":475,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentSilver2.90mm.jpg?v=1590254000"},"aspect_ratio":1.0,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentSilver2.90mm.jpg?v=1590254000","width":475},{"alt":null,"id":751927165018,"position":2,"preview_image":{"aspect_ratio":1.0,"height":475,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Silver_BoFee_Bear_1ebc07c4-a4f7-4223-9572-73a1bd50025b.jpeg?v=1569043923"},"aspect_ratio":1.0,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Silver_BoFee_Bear_1ebc07c4-a4f7-4223-9572-73a1bd50025b.jpeg?v=1569043923","width":475},{"alt":null,"id":772717281370,"position":3,"preview_image":{"aspect_ratio":0.992,"height":475,"width":471,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_b3bde5bb-9356-41bd-9f21-16f1ff26d5b4.jpeg?v=1569047864"},"aspect_ratio":0.992,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_b3bde5bb-9356-41bd-9f21-16f1ff26d5b4.jpeg?v=1569047864","width":471},{"alt":null,"id":772717248602,"position":4,"preview_image":{"aspect_ratio":1.015,"height":468,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_db5253a1-d4b8-4ca8-8870-dc268f66a1fd.jpeg?v=1569047864"},"aspect_ratio":1.015,"height":468,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_db5253a1-d4b8-4ca8-8870-dc268f66a1fd.jpeg?v=1569047864","width":475},{"alt":null,"id":772717346906,"position":5,"preview_image":{"aspect_ratio":0.488,"height":475,"width":232,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_72d28992-4f56-4522-bccd-7f12ba9fdd27.jpeg?v=1569047864"},"aspect_ratio":0.488,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_72d28992-4f56-4522-bccd-7f12ba9fdd27.jpeg?v=1569047864","width":232}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEngineer grade\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEasy to use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDurable \u0026amp; tough\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eImpact \u0026amp; heat resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eIndoor \u0026amp; outdoor uses\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCompatible with most 3D printers on the market\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCertified by SGS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eBacked by our 15 days warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eIf you're interested in maintaining your filaments in top condition, check out our \u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!product-care\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eFilament Care page\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eHealth Check\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eIf you are suffering from any of the symptoms below, you might be \"overexposure to VOCs\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEye, nose and throat irritation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eHeadache, loss of concentration and nausea\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eAllergic skin reaction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDizziness\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eSETTINGS\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eAt BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eOur Recommendation Settings\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eExtrusion temperature: 250 to 260 C\u003cbr\u003e Print bed temperature: 110 to 120 C\u003cbr\u003e Print speed: 30 to 90 mm\/sec\u003cbr\u003e Layer thickness: 0.05 to 0.40 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eFor more tricks and tips, please refer to our page: \u003ca href=\"https:\/\/botfeeder.ca\/blogs\/tips-tricks-and-guides\/how-to-print-with-botfeeder-abs\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eHow to print with BotFeeder ABS?\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eDELIVERY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!shipping-delivery\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View our full list of delivery rates to the USA and Canada.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eWe usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003e15 DAYS WARRANTY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eBotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!60-days-warranty\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View more information\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e"}
- Engineer grade
- Easy to use
- Durable & tough
- Impact & heat resistance
- Indoor & outdoor uses
- Compatible with most 3D printers on the market
- Certified by SGS
- Backed by our 15 days warranty
If you're interested in maintaining your filaments in top condition, check out our Filament Care page.
Health Check
If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".
- Eye, nose and throat irritation
- Headache, loss of concentration and nausea
- Allergic skin reaction
- Dizziness
SETTINGS
At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.
Our Recommendation Settings
Extrusion temperature: 250 to 260 C
Print bed temperature: 110 to 120 C
Print speed: 30 to 90 mm/sec
Layer thickness: 0.05 to 0.40 mm
For more tricks and tips, please refer to our page: How to print with BotFeeder ABS?
DELIVERY
> View our full list of delivery rates to the USA and Canada.
We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.
For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.
For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.
15 DAYS WARRANTY
BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.
$14.99 CAD
$24.99 CAD
-
{"id":685652672540,"title":"1kg ABS Filament 2.90mm – Silver","handle":"1kg-abs-filament-2-90mm-silver","description":"\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEngineer grade\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEasy to use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDurable \u0026amp; tough\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eImpact \u0026amp; heat resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eIndoor \u0026amp; outdoor uses\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCompatible with most 3D printers on the market\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCertified by SGS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eBacked by our 15 days warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eIf you're interested in maintaining your filaments in top condition, check out our \u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!product-care\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eFilament Care page\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eHealth Check\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eIf you are suffering from any of the symptoms below, you might be \"overexposure to VOCs\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEye, nose and throat irritation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eHeadache, loss of concentration and nausea\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eAllergic skin reaction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDizziness\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eSETTINGS\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eAt BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eOur Recommendation Settings\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eExtrusion temperature: 250 to 260 C\u003cbr\u003e Print bed temperature: 110 to 120 C\u003cbr\u003e Print speed: 30 to 90 mm\/sec\u003cbr\u003e Layer thickness: 0.05 to 0.40 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eFor more tricks and tips, please refer to our page: \u003ca href=\"https:\/\/botfeeder.ca\/blogs\/tips-tricks-and-guides\/how-to-print-with-botfeeder-abs\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eHow to print with BotFeeder ABS?\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eDELIVERY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!shipping-delivery\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View our full list of delivery rates to the USA and Canada.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eWe usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003e15 DAYS WARRANTY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eBotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!60-days-warranty\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View more information\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","published_at":"2017-09-16T16:13:59-04:00","created_at":"2018-03-23T12:51:49-04:00","vendor":"BotFeeder","type":"ABS","tags":["1kg","2.90mm","3D Printer Filament","700g to 1kg","ABS","For Fun","For Work","Opaque","Silver"],"price":1499,"price_min":1499,"price_max":1499,"available":true,"price_varies":false,"compare_at_price":2499,"compare_at_price_min":2499,"compare_at_price_max":2499,"compare_at_price_varies":false,"variants":[{"id":8026619314204,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1150","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"1kg ABS Filament 2.90mm – Silver","public_title":null,"options":["Default Title"],"price":1499,"weight":1670,"compare_at_price":2499,"inventory_quantity":36,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentSilver2.90mm.jpg?v=1590254001","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Silver_BoFee_Bear_1ebc07c4-a4f7-4223-9572-73a1bd50025b.jpeg?v=1590254001","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_b3bde5bb-9356-41bd-9f21-16f1ff26d5b4.jpeg?v=1590254001","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_db5253a1-d4b8-4ca8-8870-dc268f66a1fd.jpeg?v=1590254001","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_72d28992-4f56-4522-bccd-7f12ba9fdd27.jpeg?v=1590254001"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentSilver2.90mm.jpg?v=1590254001","options":["Title"],"media":[{"alt":null,"id":9111827677334,"position":1,"preview_image":{"aspect_ratio":1.0,"height":475,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentSilver2.90mm.jpg?v=1590254000"},"aspect_ratio":1.0,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentSilver2.90mm.jpg?v=1590254000","width":475},{"alt":null,"id":751927165018,"position":2,"preview_image":{"aspect_ratio":1.0,"height":475,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Silver_BoFee_Bear_1ebc07c4-a4f7-4223-9572-73a1bd50025b.jpeg?v=1569043923"},"aspect_ratio":1.0,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Silver_BoFee_Bear_1ebc07c4-a4f7-4223-9572-73a1bd50025b.jpeg?v=1569043923","width":475},{"alt":null,"id":772717281370,"position":3,"preview_image":{"aspect_ratio":0.992,"height":475,"width":471,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_b3bde5bb-9356-41bd-9f21-16f1ff26d5b4.jpeg?v=1569047864"},"aspect_ratio":0.992,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_b3bde5bb-9356-41bd-9f21-16f1ff26d5b4.jpeg?v=1569047864","width":471},{"alt":null,"id":772717248602,"position":4,"preview_image":{"aspect_ratio":1.015,"height":468,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_db5253a1-d4b8-4ca8-8870-dc268f66a1fd.jpeg?v=1569047864"},"aspect_ratio":1.015,"height":468,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_db5253a1-d4b8-4ca8-8870-dc268f66a1fd.jpeg?v=1569047864","width":475},{"alt":null,"id":772717346906,"position":5,"preview_image":{"aspect_ratio":0.488,"height":475,"width":232,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_72d28992-4f56-4522-bccd-7f12ba9fdd27.jpeg?v=1569047864"},"aspect_ratio":0.488,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_72d28992-4f56-4522-bccd-7f12ba9fdd27.jpeg?v=1569047864","width":232}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEngineer grade\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEasy to use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDurable \u0026amp; tough\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eImpact \u0026amp; heat resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eIndoor \u0026amp; outdoor uses\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCompatible with most 3D printers on the market\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCertified by SGS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eBacked by our 15 days warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eIf you're interested in maintaining your filaments in top condition, check out our \u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!product-care\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eFilament Care page\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eHealth Check\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eIf you are suffering from any of the symptoms below, you might be \"overexposure to VOCs\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEye, nose and throat irritation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eHeadache, loss of concentration and nausea\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eAllergic skin reaction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDizziness\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eSETTINGS\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eAt BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eOur Recommendation Settings\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eExtrusion temperature: 250 to 260 C\u003cbr\u003e Print bed temperature: 110 to 120 C\u003cbr\u003e Print speed: 30 to 90 mm\/sec\u003cbr\u003e Layer thickness: 0.05 to 0.40 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eFor more tricks and tips, please refer to our page: \u003ca href=\"https:\/\/botfeeder.ca\/blogs\/tips-tricks-and-guides\/how-to-print-with-botfeeder-abs\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eHow to print with BotFeeder ABS?\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eDELIVERY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!shipping-delivery\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View our full list of delivery rates to the USA and Canada.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eWe usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003e15 DAYS WARRANTY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eBotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!60-days-warranty\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View more information\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e"}
-
{"id":685651853340,"title":"1kg ABS Filament 2.90mm – Red","handle":"1kg-abs-filament-2-90mm-red","description":"\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEngineer grade\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEasy to use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDurable \u0026amp; tough\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eImpact \u0026amp; heat resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eIndoor \u0026amp; outdoor uses\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCompatible with most 3D printers on the market\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCertified by SGS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eBacked by our 15 days warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eIf you're interested in maintaining your filaments in top condition, check out our \u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!product-care\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eFilament Care page\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eHealth Check\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eIf you are suffering from any of the symptoms below, you might be \"overexposure to VOCs\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEye, nose and throat irritation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eHeadache, loss of concentration and nausea\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eAllergic skin reaction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDizziness\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eSETTINGS\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eAt BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eOur Recommendation Settings\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eExtrusion temperature: 250 to 260 C\u003cbr\u003e Print bed temperature: 110 to 120 C\u003cbr\u003e Print speed: 30 to 90 mm\/sec\u003cbr\u003e Layer thickness: 0.05 to 0.40 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eFor more tricks and tips, please refer to our page: \u003ca href=\"https:\/\/botfeeder.ca\/blogs\/tips-tricks-and-guides\/how-to-print-with-botfeeder-abs\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eHow to print with BotFeeder ABS?\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eDELIVERY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!shipping-delivery\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View our full list of delivery rates to the USA and Canada.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eWe usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003e15 DAYS WARRANTY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eBotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!60-days-warranty\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View more information\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","published_at":"2017-09-16T16:12:13-04:00","created_at":"2018-03-23T12:51:24-04:00","vendor":"BotFeeder","type":"ABS","tags":["1kg","2.90mm","3D Printer Filament","700g to 1kg","ABS","For Fun","For Work","Opaque","Red"],"price":1499,"price_min":1499,"price_max":1499,"available":true,"price_varies":false,"compare_at_price":2499,"compare_at_price_min":2499,"compare_at_price_max":2499,"compare_at_price_varies":false,"variants":[{"id":8026618396700,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1050","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"1kg ABS Filament 2.90mm – Red","public_title":null,"options":["Default Title"],"price":1499,"weight":1670,"compare_at_price":2499,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentRed2.90mm.jpg?v=1590253976","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Red_BoFee_Bear_b5755bf6-ce78-4214-8f2e-f0fcd519280e.jpeg?v=1590253976","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_b5746fb7-0ef8-4581-bcf5-4cad61906c6a.jpeg?v=1590253976","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_10bf1a07-837e-4f20-ab94-f1c071b591be.jpeg?v=1590253976","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_6aeb47e8-2146-444f-b773-31d664d76670.jpeg?v=1590253976"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentRed2.90mm.jpg?v=1590253976","options":["Title"],"media":[{"alt":null,"id":9111827349654,"position":1,"preview_image":{"aspect_ratio":1.0,"height":475,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentRed2.90mm.jpg?v=1590253974"},"aspect_ratio":1.0,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentRed2.90mm.jpg?v=1590253974","width":475},{"alt":null,"id":751927099482,"position":2,"preview_image":{"aspect_ratio":1.0,"height":475,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Red_BoFee_Bear_b5755bf6-ce78-4214-8f2e-f0fcd519280e.jpeg?v=1569043923"},"aspect_ratio":1.0,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Red_BoFee_Bear_b5755bf6-ce78-4214-8f2e-f0fcd519280e.jpeg?v=1569043923","width":475},{"alt":null,"id":772716986458,"position":3,"preview_image":{"aspect_ratio":0.992,"height":475,"width":471,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_b5746fb7-0ef8-4581-bcf5-4cad61906c6a.jpeg?v=1569047864"},"aspect_ratio":0.992,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_b5746fb7-0ef8-4581-bcf5-4cad61906c6a.jpeg?v=1569047864","width":471},{"alt":null,"id":772716953690,"position":4,"preview_image":{"aspect_ratio":1.015,"height":468,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_10bf1a07-837e-4f20-ab94-f1c071b591be.jpeg?v=1569047864"},"aspect_ratio":1.015,"height":468,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_10bf1a07-837e-4f20-ab94-f1c071b591be.jpeg?v=1569047864","width":475},{"alt":null,"id":772717019226,"position":5,"preview_image":{"aspect_ratio":0.488,"height":475,"width":232,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_6aeb47e8-2146-444f-b773-31d664d76670.jpeg?v=1569047864"},"aspect_ratio":0.488,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_6aeb47e8-2146-444f-b773-31d664d76670.jpeg?v=1569047864","width":232}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEngineer grade\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEasy to use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDurable \u0026amp; tough\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eImpact \u0026amp; heat resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eIndoor \u0026amp; outdoor uses\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCompatible with most 3D printers on the market\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCertified by SGS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eBacked by our 15 days warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eIf you're interested in maintaining your filaments in top condition, check out our \u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!product-care\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eFilament Care page\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eHealth Check\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eIf you are suffering from any of the symptoms below, you might be \"overexposure to VOCs\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEye, nose and throat irritation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eHeadache, loss of concentration and nausea\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eAllergic skin reaction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDizziness\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eSETTINGS\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eAt BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eOur Recommendation Settings\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eExtrusion temperature: 250 to 260 C\u003cbr\u003e Print bed temperature: 110 to 120 C\u003cbr\u003e Print speed: 30 to 90 mm\/sec\u003cbr\u003e Layer thickness: 0.05 to 0.40 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eFor more tricks and tips, please refer to our page: \u003ca href=\"https:\/\/botfeeder.ca\/blogs\/tips-tricks-and-guides\/how-to-print-with-botfeeder-abs\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eHow to print with BotFeeder ABS?\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eDELIVERY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!shipping-delivery\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View our full list of delivery rates to the USA and Canada.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eWe usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003e15 DAYS WARRANTY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eBotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!60-days-warranty\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View more information\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e"}
- Engineer grade
- Easy to use
- Durable & tough
- Impact & heat resistance
- Indoor & outdoor uses
- Compatible with most 3D printers on the market
- Certified by SGS
- Backed by our 15 days warranty
If you're interested in maintaining your filaments in top condition, check out our Filament Care page.
Health Check
If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".
- Eye, nose and throat irritation
- Headache, loss of concentration and nausea
- Allergic skin reaction
- Dizziness
SETTINGS
At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.
Our Recommendation Settings
Extrusion temperature: 250 to 260 C
Print bed temperature: 110 to 120 C
Print speed: 30 to 90 mm/sec
Layer thickness: 0.05 to 0.40 mm
For more tricks and tips, please refer to our page: How to print with BotFeeder ABS?
DELIVERY
> View our full list of delivery rates to the USA and Canada.
We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.
For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.
For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.
15 DAYS WARRANTY
BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.
$14.99 CAD
$24.99 CAD
-
{"id":685651853340,"title":"1kg ABS Filament 2.90mm – Red","handle":"1kg-abs-filament-2-90mm-red","description":"\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEngineer grade\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEasy to use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDurable \u0026amp; tough\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eImpact \u0026amp; heat resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eIndoor \u0026amp; outdoor uses\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCompatible with most 3D printers on the market\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCertified by SGS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eBacked by our 15 days warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eIf you're interested in maintaining your filaments in top condition, check out our \u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!product-care\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eFilament Care page\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eHealth Check\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eIf you are suffering from any of the symptoms below, you might be \"overexposure to VOCs\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEye, nose and throat irritation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eHeadache, loss of concentration and nausea\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eAllergic skin reaction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDizziness\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eSETTINGS\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eAt BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eOur Recommendation Settings\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eExtrusion temperature: 250 to 260 C\u003cbr\u003e Print bed temperature: 110 to 120 C\u003cbr\u003e Print speed: 30 to 90 mm\/sec\u003cbr\u003e Layer thickness: 0.05 to 0.40 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eFor more tricks and tips, please refer to our page: \u003ca href=\"https:\/\/botfeeder.ca\/blogs\/tips-tricks-and-guides\/how-to-print-with-botfeeder-abs\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eHow to print with BotFeeder ABS?\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eDELIVERY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!shipping-delivery\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View our full list of delivery rates to the USA and Canada.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eWe usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003e15 DAYS WARRANTY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eBotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!60-days-warranty\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View more information\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","published_at":"2017-09-16T16:12:13-04:00","created_at":"2018-03-23T12:51:24-04:00","vendor":"BotFeeder","type":"ABS","tags":["1kg","2.90mm","3D Printer Filament","700g to 1kg","ABS","For Fun","For Work","Opaque","Red"],"price":1499,"price_min":1499,"price_max":1499,"available":true,"price_varies":false,"compare_at_price":2499,"compare_at_price_min":2499,"compare_at_price_max":2499,"compare_at_price_varies":false,"variants":[{"id":8026618396700,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1050","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"1kg ABS Filament 2.90mm – Red","public_title":null,"options":["Default Title"],"price":1499,"weight":1670,"compare_at_price":2499,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentRed2.90mm.jpg?v=1590253976","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Red_BoFee_Bear_b5755bf6-ce78-4214-8f2e-f0fcd519280e.jpeg?v=1590253976","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_b5746fb7-0ef8-4581-bcf5-4cad61906c6a.jpeg?v=1590253976","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_10bf1a07-837e-4f20-ab94-f1c071b591be.jpeg?v=1590253976","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_6aeb47e8-2146-444f-b773-31d664d76670.jpeg?v=1590253976"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentRed2.90mm.jpg?v=1590253976","options":["Title"],"media":[{"alt":null,"id":9111827349654,"position":1,"preview_image":{"aspect_ratio":1.0,"height":475,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentRed2.90mm.jpg?v=1590253974"},"aspect_ratio":1.0,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentRed2.90mm.jpg?v=1590253974","width":475},{"alt":null,"id":751927099482,"position":2,"preview_image":{"aspect_ratio":1.0,"height":475,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Red_BoFee_Bear_b5755bf6-ce78-4214-8f2e-f0fcd519280e.jpeg?v=1569043923"},"aspect_ratio":1.0,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Red_BoFee_Bear_b5755bf6-ce78-4214-8f2e-f0fcd519280e.jpeg?v=1569043923","width":475},{"alt":null,"id":772716986458,"position":3,"preview_image":{"aspect_ratio":0.992,"height":475,"width":471,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_b5746fb7-0ef8-4581-bcf5-4cad61906c6a.jpeg?v=1569047864"},"aspect_ratio":0.992,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_b5746fb7-0ef8-4581-bcf5-4cad61906c6a.jpeg?v=1569047864","width":471},{"alt":null,"id":772716953690,"position":4,"preview_image":{"aspect_ratio":1.015,"height":468,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_10bf1a07-837e-4f20-ab94-f1c071b591be.jpeg?v=1569047864"},"aspect_ratio":1.015,"height":468,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_10bf1a07-837e-4f20-ab94-f1c071b591be.jpeg?v=1569047864","width":475},{"alt":null,"id":772717019226,"position":5,"preview_image":{"aspect_ratio":0.488,"height":475,"width":232,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_6aeb47e8-2146-444f-b773-31d664d76670.jpeg?v=1569047864"},"aspect_ratio":0.488,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_6aeb47e8-2146-444f-b773-31d664d76670.jpeg?v=1569047864","width":232}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEngineer grade\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEasy to use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDurable \u0026amp; tough\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eImpact \u0026amp; heat resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eIndoor \u0026amp; outdoor uses\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCompatible with most 3D printers on the market\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCertified by SGS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eBacked by our 15 days warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eIf you're interested in maintaining your filaments in top condition, check out our \u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!product-care\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eFilament Care page\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eHealth Check\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eIf you are suffering from any of the symptoms below, you might be \"overexposure to VOCs\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEye, nose and throat irritation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eHeadache, loss of concentration and nausea\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eAllergic skin reaction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDizziness\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eSETTINGS\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eAt BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eOur Recommendation Settings\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eExtrusion temperature: 250 to 260 C\u003cbr\u003e Print bed temperature: 110 to 120 C\u003cbr\u003e Print speed: 30 to 90 mm\/sec\u003cbr\u003e Layer thickness: 0.05 to 0.40 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eFor more tricks and tips, please refer to our page: \u003ca href=\"https:\/\/botfeeder.ca\/blogs\/tips-tricks-and-guides\/how-to-print-with-botfeeder-abs\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eHow to print with BotFeeder ABS?\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eDELIVERY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!shipping-delivery\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View our full list of delivery rates to the USA and Canada.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eWe usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003e15 DAYS WARRANTY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eBotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!60-days-warranty\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View more information\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e"}
-
{"id":685651001372,"title":"1kg ABS Filament 2.90mm – Orange","handle":"1kg-abs-filament-2-90mm-orange","description":"\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEngineer grade\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEasy to use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDurable \u0026amp; tough\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eImpact \u0026amp; heat resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eIndoor \u0026amp; outdoor uses\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCompatible with most 3D printers on the market\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCertified by SGS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eBacked by our 15 days warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eIf you're interested in maintaining your filaments in top condition, check out our \u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!product-care\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eFilament Care page\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eHealth Check\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eIf you are suffering from any of the symptoms below, you might be \"overexposure to VOCs\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEye, nose and throat irritation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eHeadache, loss of concentration and nausea\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eAllergic skin reaction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDizziness\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eSETTINGS\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eAt BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eOur Recommendation Settings\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eExtrusion temperature: 250 to 260 C\u003cbr\u003e Print bed temperature: 110 to 120 C\u003cbr\u003e Print speed: 30 to 90 mm\/sec\u003cbr\u003e Layer thickness: 0.05 to 0.40 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eFor more tricks and tips, please refer to our page: \u003ca href=\"https:\/\/botfeeder.ca\/blogs\/tips-tricks-and-guides\/how-to-print-with-botfeeder-abs\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eHow to print with BotFeeder ABS?\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eDELIVERY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!shipping-delivery\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View our full list of delivery rates to the USA and Canada.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eWe usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003e15 DAYS WARRANTY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eBotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!60-days-warranty\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View more information\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","published_at":"2017-09-16T16:08:17-04:00","created_at":"2018-03-23T12:50:31-04:00","vendor":"BotFeeder","type":"ABS","tags":["1kg","2.90mm","3D Printer Filament","700g to 1kg","ABS","For Fun","For Work","Opaque","Orange"],"price":1499,"price_min":1499,"price_max":1499,"available":true,"price_varies":false,"compare_at_price":2499,"compare_at_price_min":2499,"compare_at_price_max":2499,"compare_at_price_varies":false,"variants":[{"id":8026617315356,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0750","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"1kg ABS Filament 2.90mm – Orange","public_title":null,"options":["Default Title"],"price":1499,"weight":1670,"compare_at_price":2499,"inventory_quantity":22,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentOrange2.90mm.jpg?v=1590253926","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Orange_BoFee_Bear_37384e4e-7e93-4197-a9d9-32322c7ca2af.jpeg?v=1590253926","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_a54d03d1-476f-4f76-a76a-e2ff43134af2.jpeg?v=1590253926","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_be7f7da7-17ac-41e4-9c71-4b7d933a186c.jpeg?v=1590253926","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_20d1555e-dd3e-4a89-a369-5a5cad4cf49d.jpeg?v=1590253926"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentOrange2.90mm.jpg?v=1590253926","options":["Title"],"media":[{"alt":null,"id":9111826956438,"position":1,"preview_image":{"aspect_ratio":1.0,"height":475,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentOrange2.90mm.jpg?v=1590253925"},"aspect_ratio":1.0,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentOrange2.90mm.jpg?v=1590253925","width":475},{"alt":null,"id":751926968410,"position":2,"preview_image":{"aspect_ratio":1.0,"height":475,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Orange_BoFee_Bear_37384e4e-7e93-4197-a9d9-32322c7ca2af.jpeg?v=1569043923"},"aspect_ratio":1.0,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Orange_BoFee_Bear_37384e4e-7e93-4197-a9d9-32322c7ca2af.jpeg?v=1569043923","width":475},{"alt":null,"id":772716724314,"position":3,"preview_image":{"aspect_ratio":0.992,"height":475,"width":471,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_a54d03d1-476f-4f76-a76a-e2ff43134af2.jpeg?v=1569047864"},"aspect_ratio":0.992,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_a54d03d1-476f-4f76-a76a-e2ff43134af2.jpeg?v=1569047864","width":471},{"alt":null,"id":772716691546,"position":4,"preview_image":{"aspect_ratio":1.015,"height":468,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_be7f7da7-17ac-41e4-9c71-4b7d933a186c.jpeg?v=1569047864"},"aspect_ratio":1.015,"height":468,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_be7f7da7-17ac-41e4-9c71-4b7d933a186c.jpeg?v=1569047864","width":475},{"alt":null,"id":772716757082,"position":5,"preview_image":{"aspect_ratio":0.488,"height":475,"width":232,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_20d1555e-dd3e-4a89-a369-5a5cad4cf49d.jpeg?v=1569047864"},"aspect_ratio":0.488,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_20d1555e-dd3e-4a89-a369-5a5cad4cf49d.jpeg?v=1569047864","width":232}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEngineer grade\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEasy to use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDurable \u0026amp; tough\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eImpact \u0026amp; heat resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eIndoor \u0026amp; outdoor uses\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCompatible with most 3D printers on the market\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCertified by SGS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eBacked by our 15 days warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eIf you're interested in maintaining your filaments in top condition, check out our \u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!product-care\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eFilament Care page\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eHealth Check\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eIf you are suffering from any of the symptoms below, you might be \"overexposure to VOCs\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEye, nose and throat irritation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eHeadache, loss of concentration and nausea\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eAllergic skin reaction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDizziness\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eSETTINGS\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eAt BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eOur Recommendation Settings\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eExtrusion temperature: 250 to 260 C\u003cbr\u003e Print bed temperature: 110 to 120 C\u003cbr\u003e Print speed: 30 to 90 mm\/sec\u003cbr\u003e Layer thickness: 0.05 to 0.40 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eFor more tricks and tips, please refer to our page: \u003ca href=\"https:\/\/botfeeder.ca\/blogs\/tips-tricks-and-guides\/how-to-print-with-botfeeder-abs\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eHow to print with BotFeeder ABS?\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eDELIVERY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!shipping-delivery\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View our full list of delivery rates to the USA and Canada.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eWe usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003e15 DAYS WARRANTY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eBotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!60-days-warranty\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View more information\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e"}
- Engineer grade
- Easy to use
- Durable & tough
- Impact & heat resistance
- Indoor & outdoor uses
- Compatible with most 3D printers on the market
- Certified by SGS
- Backed by our 15 days warranty
If you're interested in maintaining your filaments in top condition, check out our Filament Care page.
Health Check
If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".
- Eye, nose and throat irritation
- Headache, loss of concentration and nausea
- Allergic skin reaction
- Dizziness
SETTINGS
At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.
Our Recommendation Settings
Extrusion temperature: 250 to 260 C
Print bed temperature: 110 to 120 C
Print speed: 30 to 90 mm/sec
Layer thickness: 0.05 to 0.40 mm
For more tricks and tips, please refer to our page: How to print with BotFeeder ABS?
DELIVERY
> View our full list of delivery rates to the USA and Canada.
We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.
For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.
For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.
15 DAYS WARRANTY
BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.
$14.99 CAD
$24.99 CAD
-
{"id":685651001372,"title":"1kg ABS Filament 2.90mm – Orange","handle":"1kg-abs-filament-2-90mm-orange","description":"\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEngineer grade\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEasy to use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDurable \u0026amp; tough\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eImpact \u0026amp; heat resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eIndoor \u0026amp; outdoor uses\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCompatible with most 3D printers on the market\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCertified by SGS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eBacked by our 15 days warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eIf you're interested in maintaining your filaments in top condition, check out our \u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!product-care\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eFilament Care page\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eHealth Check\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eIf you are suffering from any of the symptoms below, you might be \"overexposure to VOCs\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEye, nose and throat irritation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eHeadache, loss of concentration and nausea\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eAllergic skin reaction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDizziness\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eSETTINGS\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eAt BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eOur Recommendation Settings\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eExtrusion temperature: 250 to 260 C\u003cbr\u003e Print bed temperature: 110 to 120 C\u003cbr\u003e Print speed: 30 to 90 mm\/sec\u003cbr\u003e Layer thickness: 0.05 to 0.40 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eFor more tricks and tips, please refer to our page: \u003ca href=\"https:\/\/botfeeder.ca\/blogs\/tips-tricks-and-guides\/how-to-print-with-botfeeder-abs\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eHow to print with BotFeeder ABS?\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eDELIVERY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!shipping-delivery\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View our full list of delivery rates to the USA and Canada.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eWe usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003e15 DAYS WARRANTY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eBotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!60-days-warranty\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View more information\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","published_at":"2017-09-16T16:08:17-04:00","created_at":"2018-03-23T12:50:31-04:00","vendor":"BotFeeder","type":"ABS","tags":["1kg","2.90mm","3D Printer Filament","700g to 1kg","ABS","For Fun","For Work","Opaque","Orange"],"price":1499,"price_min":1499,"price_max":1499,"available":true,"price_varies":false,"compare_at_price":2499,"compare_at_price_min":2499,"compare_at_price_max":2499,"compare_at_price_varies":false,"variants":[{"id":8026617315356,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0750","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"1kg ABS Filament 2.90mm – Orange","public_title":null,"options":["Default Title"],"price":1499,"weight":1670,"compare_at_price":2499,"inventory_quantity":22,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentOrange2.90mm.jpg?v=1590253926","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Orange_BoFee_Bear_37384e4e-7e93-4197-a9d9-32322c7ca2af.jpeg?v=1590253926","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_a54d03d1-476f-4f76-a76a-e2ff43134af2.jpeg?v=1590253926","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_be7f7da7-17ac-41e4-9c71-4b7d933a186c.jpeg?v=1590253926","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_20d1555e-dd3e-4a89-a369-5a5cad4cf49d.jpeg?v=1590253926"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentOrange2.90mm.jpg?v=1590253926","options":["Title"],"media":[{"alt":null,"id":9111826956438,"position":1,"preview_image":{"aspect_ratio":1.0,"height":475,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentOrange2.90mm.jpg?v=1590253925"},"aspect_ratio":1.0,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentOrange2.90mm.jpg?v=1590253925","width":475},{"alt":null,"id":751926968410,"position":2,"preview_image":{"aspect_ratio":1.0,"height":475,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Orange_BoFee_Bear_37384e4e-7e93-4197-a9d9-32322c7ca2af.jpeg?v=1569043923"},"aspect_ratio":1.0,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Orange_BoFee_Bear_37384e4e-7e93-4197-a9d9-32322c7ca2af.jpeg?v=1569043923","width":475},{"alt":null,"id":772716724314,"position":3,"preview_image":{"aspect_ratio":0.992,"height":475,"width":471,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_a54d03d1-476f-4f76-a76a-e2ff43134af2.jpeg?v=1569047864"},"aspect_ratio":0.992,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_a54d03d1-476f-4f76-a76a-e2ff43134af2.jpeg?v=1569047864","width":471},{"alt":null,"id":772716691546,"position":4,"preview_image":{"aspect_ratio":1.015,"height":468,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_be7f7da7-17ac-41e4-9c71-4b7d933a186c.jpeg?v=1569047864"},"aspect_ratio":1.015,"height":468,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_be7f7da7-17ac-41e4-9c71-4b7d933a186c.jpeg?v=1569047864","width":475},{"alt":null,"id":772716757082,"position":5,"preview_image":{"aspect_ratio":0.488,"height":475,"width":232,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_20d1555e-dd3e-4a89-a369-5a5cad4cf49d.jpeg?v=1569047864"},"aspect_ratio":0.488,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_20d1555e-dd3e-4a89-a369-5a5cad4cf49d.jpeg?v=1569047864","width":232}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEngineer grade\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEasy to use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDurable \u0026amp; tough\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eImpact \u0026amp; heat resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eIndoor \u0026amp; outdoor uses\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCompatible with most 3D printers on the market\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCertified by SGS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eBacked by our 15 days warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eIf you're interested in maintaining your filaments in top condition, check out our \u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!product-care\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eFilament Care page\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eHealth Check\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eIf you are suffering from any of the symptoms below, you might be \"overexposure to VOCs\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEye, nose and throat irritation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eHeadache, loss of concentration and nausea\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eAllergic skin reaction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDizziness\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eSETTINGS\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eAt BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eOur Recommendation Settings\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eExtrusion temperature: 250 to 260 C\u003cbr\u003e Print bed temperature: 110 to 120 C\u003cbr\u003e Print speed: 30 to 90 mm\/sec\u003cbr\u003e Layer thickness: 0.05 to 0.40 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eFor more tricks and tips, please refer to our page: \u003ca href=\"https:\/\/botfeeder.ca\/blogs\/tips-tricks-and-guides\/how-to-print-with-botfeeder-abs\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eHow to print with BotFeeder ABS?\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eDELIVERY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!shipping-delivery\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View our full list of delivery rates to the USA and Canada.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eWe usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003e15 DAYS WARRANTY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eBotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!60-days-warranty\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View more information\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e"}
-
{"id":685650477084,"title":"1kg ABS Filament 2.90mm – Gray","handle":"1kg-abs-filament-2-90mm-gray","description":"\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEngineer grade\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEasy to use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDurable \u0026amp; tough\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eImpact \u0026amp; heat resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eIndoor \u0026amp; outdoor uses\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCompatible with most 3D printers on the market\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCertified by SGS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eBacked by our 15 days warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eIf you're interested in maintaining your filaments in top condition, check out our \u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!product-care\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eFilament Care page\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eHealth Check\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eIf you are suffering from any of the symptoms below, you might be \"overexposure to VOCs\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEye, nose and throat irritation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eHeadache, loss of concentration and nausea\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eAllergic skin reaction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDizziness\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eSETTINGS\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eAt BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eOur Recommendation Settings\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eExtrusion temperature: 250 to 260 C\u003cbr\u003e Print bed temperature: 110 to 120 C\u003cbr\u003e Print speed: 30 to 90 mm\/sec\u003cbr\u003e Layer thickness: 0.05 to 0.40 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eFor more tricks and tips, please refer to our page: \u003ca href=\"https:\/\/botfeeder.ca\/blogs\/tips-tricks-and-guides\/how-to-print-with-botfeeder-abs\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eHow to print with BotFeeder ABS?\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eDELIVERY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!shipping-delivery\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View our full list of delivery rates to the USA and Canada.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eWe usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003e15 DAYS WARRANTY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eBotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!60-days-warranty\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View more information\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","published_at":"2017-09-22T22:51:23-04:00","created_at":"2018-03-23T12:49:29-04:00","vendor":"BotFeeder","type":"ABS","tags":["1kg","2.90mm","3D Printer Filament","700g to 1kg","ABS","For Fun","For Work","Gray","Opaque"],"price":1499,"price_min":1499,"price_max":1499,"available":true,"price_varies":false,"compare_at_price":2499,"compare_at_price_min":2499,"compare_at_price_max":2499,"compare_at_price_varies":false,"variants":[{"id":8026617053212,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0450","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"1kg ABS Filament 2.90mm – Gray","public_title":null,"options":["Default Title"],"price":1499,"weight":1670,"compare_at_price":2499,"inventory_quantity":39,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentGray2.90mm.jpg?v=1590253876","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Gray_BoFee_Bear.jpeg?v=1590253876","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_2c11fa25-30b4-4eae-9556-7ebbae0be39e.jpeg?v=1590253876","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_989b3b90-c2a6-4796-8b44-5b94b31df826.jpeg?v=1590253876","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_634fe41d-1421-4f14-ab2c-7dc4970d2d98.jpeg?v=1590253876"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentGray2.90mm.jpg?v=1590253876","options":["Title"],"media":[{"alt":null,"id":9111826104470,"position":1,"preview_image":{"aspect_ratio":1.0,"height":475,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentGray2.90mm.jpg?v=1590253875"},"aspect_ratio":1.0,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentGray2.90mm.jpg?v=1590253875","width":475},{"alt":null,"id":751932702810,"position":2,"preview_image":{"aspect_ratio":1.0,"height":475,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Gray_BoFee_Bear.jpeg?v=1569043924"},"aspect_ratio":1.0,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Gray_BoFee_Bear.jpeg?v=1569043924","width":475},{"alt":null,"id":772716462170,"position":3,"preview_image":{"aspect_ratio":0.992,"height":475,"width":471,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_2c11fa25-30b4-4eae-9556-7ebbae0be39e.jpeg?v=1569047864"},"aspect_ratio":0.992,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_2c11fa25-30b4-4eae-9556-7ebbae0be39e.jpeg?v=1569047864","width":471},{"alt":null,"id":772716429402,"position":4,"preview_image":{"aspect_ratio":1.015,"height":468,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_989b3b90-c2a6-4796-8b44-5b94b31df826.jpeg?v=1569047864"},"aspect_ratio":1.015,"height":468,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_989b3b90-c2a6-4796-8b44-5b94b31df826.jpeg?v=1569047864","width":475},{"alt":null,"id":772716494938,"position":5,"preview_image":{"aspect_ratio":0.488,"height":475,"width":232,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_634fe41d-1421-4f14-ab2c-7dc4970d2d98.jpeg?v=1569047864"},"aspect_ratio":0.488,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_634fe41d-1421-4f14-ab2c-7dc4970d2d98.jpeg?v=1569047864","width":232}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEngineer grade\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEasy to use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDurable \u0026amp; tough\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eImpact \u0026amp; heat resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eIndoor \u0026amp; outdoor uses\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCompatible with most 3D printers on the market\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCertified by SGS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eBacked by our 15 days warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eIf you're interested in maintaining your filaments in top condition, check out our \u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!product-care\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eFilament Care page\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eHealth Check\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eIf you are suffering from any of the symptoms below, you might be \"overexposure to VOCs\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEye, nose and throat irritation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eHeadache, loss of concentration and nausea\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eAllergic skin reaction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDizziness\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eSETTINGS\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eAt BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eOur Recommendation Settings\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eExtrusion temperature: 250 to 260 C\u003cbr\u003e Print bed temperature: 110 to 120 C\u003cbr\u003e Print speed: 30 to 90 mm\/sec\u003cbr\u003e Layer thickness: 0.05 to 0.40 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eFor more tricks and tips, please refer to our page: \u003ca href=\"https:\/\/botfeeder.ca\/blogs\/tips-tricks-and-guides\/how-to-print-with-botfeeder-abs\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eHow to print with BotFeeder ABS?\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eDELIVERY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!shipping-delivery\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View our full list of delivery rates to the USA and Canada.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eWe usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003e15 DAYS WARRANTY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eBotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!60-days-warranty\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View more information\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e"}
- Engineer grade
- Easy to use
- Durable & tough
- Impact & heat resistance
- Indoor & outdoor uses
- Compatible with most 3D printers on the market
- Certified by SGS
- Backed by our 15 days warranty
If you're interested in maintaining your filaments in top condition, check out our Filament Care page.
Health Check
If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".
- Eye, nose and throat irritation
- Headache, loss of concentration and nausea
- Allergic skin reaction
- Dizziness
SETTINGS
At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.
Our Recommendation Settings
Extrusion temperature: 250 to 260 C
Print bed temperature: 110 to 120 C
Print speed: 30 to 90 mm/sec
Layer thickness: 0.05 to 0.40 mm
For more tricks and tips, please refer to our page: How to print with BotFeeder ABS?
DELIVERY
> View our full list of delivery rates to the USA and Canada.
We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.
For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.
For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.
15 DAYS WARRANTY
BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.
$14.99 CAD
$24.99 CAD
-
{"id":685650477084,"title":"1kg ABS Filament 2.90mm – Gray","handle":"1kg-abs-filament-2-90mm-gray","description":"\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEngineer grade\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEasy to use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDurable \u0026amp; tough\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eImpact \u0026amp; heat resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eIndoor \u0026amp; outdoor uses\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCompatible with most 3D printers on the market\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCertified by SGS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eBacked by our 15 days warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eIf you're interested in maintaining your filaments in top condition, check out our \u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!product-care\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eFilament Care page\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eHealth Check\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eIf you are suffering from any of the symptoms below, you might be \"overexposure to VOCs\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEye, nose and throat irritation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eHeadache, loss of concentration and nausea\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eAllergic skin reaction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDizziness\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eSETTINGS\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eAt BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eOur Recommendation Settings\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eExtrusion temperature: 250 to 260 C\u003cbr\u003e Print bed temperature: 110 to 120 C\u003cbr\u003e Print speed: 30 to 90 mm\/sec\u003cbr\u003e Layer thickness: 0.05 to 0.40 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eFor more tricks and tips, please refer to our page: \u003ca href=\"https:\/\/botfeeder.ca\/blogs\/tips-tricks-and-guides\/how-to-print-with-botfeeder-abs\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eHow to print with BotFeeder ABS?\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eDELIVERY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!shipping-delivery\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View our full list of delivery rates to the USA and Canada.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eWe usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003e15 DAYS WARRANTY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eBotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!60-days-warranty\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View more information\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","published_at":"2017-09-22T22:51:23-04:00","created_at":"2018-03-23T12:49:29-04:00","vendor":"BotFeeder","type":"ABS","tags":["1kg","2.90mm","3D Printer Filament","700g to 1kg","ABS","For Fun","For Work","Gray","Opaque"],"price":1499,"price_min":1499,"price_max":1499,"available":true,"price_varies":false,"compare_at_price":2499,"compare_at_price_min":2499,"compare_at_price_max":2499,"compare_at_price_varies":false,"variants":[{"id":8026617053212,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0450","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"1kg ABS Filament 2.90mm – Gray","public_title":null,"options":["Default Title"],"price":1499,"weight":1670,"compare_at_price":2499,"inventory_quantity":39,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentGray2.90mm.jpg?v=1590253876","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Gray_BoFee_Bear.jpeg?v=1590253876","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_2c11fa25-30b4-4eae-9556-7ebbae0be39e.jpeg?v=1590253876","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_989b3b90-c2a6-4796-8b44-5b94b31df826.jpeg?v=1590253876","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_634fe41d-1421-4f14-ab2c-7dc4970d2d98.jpeg?v=1590253876"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentGray2.90mm.jpg?v=1590253876","options":["Title"],"media":[{"alt":null,"id":9111826104470,"position":1,"preview_image":{"aspect_ratio":1.0,"height":475,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentGray2.90mm.jpg?v=1590253875"},"aspect_ratio":1.0,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentGray2.90mm.jpg?v=1590253875","width":475},{"alt":null,"id":751932702810,"position":2,"preview_image":{"aspect_ratio":1.0,"height":475,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Gray_BoFee_Bear.jpeg?v=1569043924"},"aspect_ratio":1.0,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Gray_BoFee_Bear.jpeg?v=1569043924","width":475},{"alt":null,"id":772716462170,"position":3,"preview_image":{"aspect_ratio":0.992,"height":475,"width":471,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_2c11fa25-30b4-4eae-9556-7ebbae0be39e.jpeg?v=1569047864"},"aspect_ratio":0.992,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_2c11fa25-30b4-4eae-9556-7ebbae0be39e.jpeg?v=1569047864","width":471},{"alt":null,"id":772716429402,"position":4,"preview_image":{"aspect_ratio":1.015,"height":468,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_989b3b90-c2a6-4796-8b44-5b94b31df826.jpeg?v=1569047864"},"aspect_ratio":1.015,"height":468,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_989b3b90-c2a6-4796-8b44-5b94b31df826.jpeg?v=1569047864","width":475},{"alt":null,"id":772716494938,"position":5,"preview_image":{"aspect_ratio":0.488,"height":475,"width":232,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_634fe41d-1421-4f14-ab2c-7dc4970d2d98.jpeg?v=1569047864"},"aspect_ratio":0.488,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_634fe41d-1421-4f14-ab2c-7dc4970d2d98.jpeg?v=1569047864","width":232}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEngineer grade\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEasy to use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDurable \u0026amp; tough\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eImpact \u0026amp; heat resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eIndoor \u0026amp; outdoor uses\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCompatible with most 3D printers on the market\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCertified by SGS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eBacked by our 15 days warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eIf you're interested in maintaining your filaments in top condition, check out our \u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!product-care\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eFilament Care page\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eHealth Check\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eIf you are suffering from any of the symptoms below, you might be \"overexposure to VOCs\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEye, nose and throat irritation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eHeadache, loss of concentration and nausea\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eAllergic skin reaction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDizziness\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eSETTINGS\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eAt BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eOur Recommendation Settings\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eExtrusion temperature: 250 to 260 C\u003cbr\u003e Print bed temperature: 110 to 120 C\u003cbr\u003e Print speed: 30 to 90 mm\/sec\u003cbr\u003e Layer thickness: 0.05 to 0.40 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eFor more tricks and tips, please refer to our page: \u003ca href=\"https:\/\/botfeeder.ca\/blogs\/tips-tricks-and-guides\/how-to-print-with-botfeeder-abs\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eHow to print with BotFeeder ABS?\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eDELIVERY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!shipping-delivery\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View our full list of delivery rates to the USA and Canada.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eWe usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003e15 DAYS WARRANTY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eBotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!60-days-warranty\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View more information\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e"}
-
{"id":685651525660,"title":"1kg ABS Filament 2.90mm – Purple","handle":"1kg-abs-filament-2-90mm-purple","description":"\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEngineer grade\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEasy to use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDurable \u0026amp; tough\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eImpact \u0026amp; heat resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eIndoor \u0026amp; outdoor uses\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCompatible with most 3D printers on the market\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCertified by SGS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eBacked by our 15 days warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eIf you're interested in maintaining your filaments in top condition, check out our \u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!product-care\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eFilament Care page\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eHealth Check\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eIf you are suffering from any of the symptoms below, you might be \"overexposure to VOCs\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEye, nose and throat irritation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eHeadache, loss of concentration and nausea\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eAllergic skin reaction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDizziness\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eSETTINGS\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eAt BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eOur Recommendation Settings\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eExtrusion temperature: 250 to 260 C\u003cbr\u003e Print bed temperature: 110 to 120 C\u003cbr\u003e Print speed: 30 to 90 mm\/sec\u003cbr\u003e Layer thickness: 0.05 to 0.40 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eFor more tricks and tips, please refer to our page: \u003ca href=\"https:\/\/botfeeder.ca\/blogs\/tips-tricks-and-guides\/how-to-print-with-botfeeder-abs\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eHow to print with BotFeeder ABS?\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eDELIVERY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!shipping-delivery\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View our full list of delivery rates to the USA and Canada.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eWe usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003e15 DAYS WARRANTY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eBotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!60-days-warranty\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View more information\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","published_at":"2017-09-16T16:10:06-04:00","created_at":"2018-03-23T12:50:57-04:00","vendor":"BotFeeder","type":"ABS","tags":["1kg","2.90mm","3D Printer Filament","700g to 1kg","ABS","For Fun","For Work","Opaque","Purple"],"price":1499,"price_min":1499,"price_max":1499,"available":true,"price_varies":false,"compare_at_price":2499,"compare_at_price_min":2499,"compare_at_price_max":2499,"compare_at_price_varies":false,"variants":[{"id":8026618036252,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0950","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"1kg ABS Filament 2.90mm – Purple","public_title":null,"options":["Default Title"],"price":1499,"weight":1670,"compare_at_price":2499,"inventory_quantity":24,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentPurple2.90mm.jpg?v=1590253952","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Purple_BoFee_Bear_e5210e50-f310-4475-9828-b57586300e09.jpeg?v=1590253952","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_e47c054b-d790-40bb-9c0e-fffaebf4e38c.jpeg?v=1590253952","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_753ac4db-4858-4da6-ae00-d259753a3623.jpeg?v=1590253952","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_e7e912d8-94e3-4693-9740-6286d104cbe8.jpeg?v=1590253952"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentPurple2.90mm.jpg?v=1590253952","options":["Title"],"media":[{"alt":null,"id":9111827251350,"position":1,"preview_image":{"aspect_ratio":1.0,"height":475,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentPurple2.90mm.jpg?v=1590253951"},"aspect_ratio":1.0,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentPurple2.90mm.jpg?v=1590253951","width":475},{"alt":null,"id":751927033946,"position":2,"preview_image":{"aspect_ratio":1.0,"height":475,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Purple_BoFee_Bear_e5210e50-f310-4475-9828-b57586300e09.jpeg?v=1569043923"},"aspect_ratio":1.0,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Purple_BoFee_Bear_e5210e50-f310-4475-9828-b57586300e09.jpeg?v=1569043923","width":475},{"alt":null,"id":772716855386,"position":3,"preview_image":{"aspect_ratio":0.992,"height":475,"width":471,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_e47c054b-d790-40bb-9c0e-fffaebf4e38c.jpeg?v=1569047864"},"aspect_ratio":0.992,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_e47c054b-d790-40bb-9c0e-fffaebf4e38c.jpeg?v=1569047864","width":471},{"alt":null,"id":772716822618,"position":4,"preview_image":{"aspect_ratio":1.015,"height":468,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_753ac4db-4858-4da6-ae00-d259753a3623.jpeg?v=1569047864"},"aspect_ratio":1.015,"height":468,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_753ac4db-4858-4da6-ae00-d259753a3623.jpeg?v=1569047864","width":475},{"alt":null,"id":772716888154,"position":5,"preview_image":{"aspect_ratio":0.488,"height":475,"width":232,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_e7e912d8-94e3-4693-9740-6286d104cbe8.jpeg?v=1569047864"},"aspect_ratio":0.488,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_e7e912d8-94e3-4693-9740-6286d104cbe8.jpeg?v=1569047864","width":232}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEngineer grade\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEasy to use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDurable \u0026amp; tough\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eImpact \u0026amp; heat resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eIndoor \u0026amp; outdoor uses\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCompatible with most 3D printers on the market\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCertified by SGS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eBacked by our 15 days warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eIf you're interested in maintaining your filaments in top condition, check out our \u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!product-care\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eFilament Care page\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eHealth Check\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eIf you are suffering from any of the symptoms below, you might be \"overexposure to VOCs\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEye, nose and throat irritation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eHeadache, loss of concentration and nausea\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eAllergic skin reaction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDizziness\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eSETTINGS\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eAt BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eOur Recommendation Settings\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eExtrusion temperature: 250 to 260 C\u003cbr\u003e Print bed temperature: 110 to 120 C\u003cbr\u003e Print speed: 30 to 90 mm\/sec\u003cbr\u003e Layer thickness: 0.05 to 0.40 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eFor more tricks and tips, please refer to our page: \u003ca href=\"https:\/\/botfeeder.ca\/blogs\/tips-tricks-and-guides\/how-to-print-with-botfeeder-abs\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eHow to print with BotFeeder ABS?\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eDELIVERY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!shipping-delivery\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View our full list of delivery rates to the USA and Canada.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eWe usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003e15 DAYS WARRANTY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eBotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!60-days-warranty\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View more information\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e"}
- Engineer grade
- Easy to use
- Durable & tough
- Impact & heat resistance
- Indoor & outdoor uses
- Compatible with most 3D printers on the market
- Certified by SGS
- Backed by our 15 days warranty
If you're interested in maintaining your filaments in top condition, check out our Filament Care page.
Health Check
If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".
- Eye, nose and throat irritation
- Headache, loss of concentration and nausea
- Allergic skin reaction
- Dizziness
SETTINGS
At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.
Our Recommendation Settings
Extrusion temperature: 250 to 260 C
Print bed temperature: 110 to 120 C
Print speed: 30 to 90 mm/sec
Layer thickness: 0.05 to 0.40 mm
For more tricks and tips, please refer to our page: How to print with BotFeeder ABS?
DELIVERY
> View our full list of delivery rates to the USA and Canada.
We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.
For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.
For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.
15 DAYS WARRANTY
BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.
$14.99 CAD
$24.99 CAD
-
{"id":685651525660,"title":"1kg ABS Filament 2.90mm – Purple","handle":"1kg-abs-filament-2-90mm-purple","description":"\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEngineer grade\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEasy to use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDurable \u0026amp; tough\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eImpact \u0026amp; heat resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eIndoor \u0026amp; outdoor uses\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCompatible with most 3D printers on the market\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCertified by SGS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eBacked by our 15 days warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eIf you're interested in maintaining your filaments in top condition, check out our \u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!product-care\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eFilament Care page\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eHealth Check\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eIf you are suffering from any of the symptoms below, you might be \"overexposure to VOCs\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEye, nose and throat irritation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eHeadache, loss of concentration and nausea\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eAllergic skin reaction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDizziness\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eSETTINGS\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eAt BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eOur Recommendation Settings\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eExtrusion temperature: 250 to 260 C\u003cbr\u003e Print bed temperature: 110 to 120 C\u003cbr\u003e Print speed: 30 to 90 mm\/sec\u003cbr\u003e Layer thickness: 0.05 to 0.40 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eFor more tricks and tips, please refer to our page: \u003ca href=\"https:\/\/botfeeder.ca\/blogs\/tips-tricks-and-guides\/how-to-print-with-botfeeder-abs\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eHow to print with BotFeeder ABS?\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eDELIVERY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!shipping-delivery\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View our full list of delivery rates to the USA and Canada.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eWe usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003e15 DAYS WARRANTY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eBotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!60-days-warranty\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View more information\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","published_at":"2017-09-16T16:10:06-04:00","created_at":"2018-03-23T12:50:57-04:00","vendor":"BotFeeder","type":"ABS","tags":["1kg","2.90mm","3D Printer Filament","700g to 1kg","ABS","For Fun","For Work","Opaque","Purple"],"price":1499,"price_min":1499,"price_max":1499,"available":true,"price_varies":false,"compare_at_price":2499,"compare_at_price_min":2499,"compare_at_price_max":2499,"compare_at_price_varies":false,"variants":[{"id":8026618036252,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0950","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"1kg ABS Filament 2.90mm – Purple","public_title":null,"options":["Default Title"],"price":1499,"weight":1670,"compare_at_price":2499,"inventory_quantity":24,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentPurple2.90mm.jpg?v=1590253952","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Purple_BoFee_Bear_e5210e50-f310-4475-9828-b57586300e09.jpeg?v=1590253952","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_e47c054b-d790-40bb-9c0e-fffaebf4e38c.jpeg?v=1590253952","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_753ac4db-4858-4da6-ae00-d259753a3623.jpeg?v=1590253952","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_e7e912d8-94e3-4693-9740-6286d104cbe8.jpeg?v=1590253952"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentPurple2.90mm.jpg?v=1590253952","options":["Title"],"media":[{"alt":null,"id":9111827251350,"position":1,"preview_image":{"aspect_ratio":1.0,"height":475,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentPurple2.90mm.jpg?v=1590253951"},"aspect_ratio":1.0,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentPurple2.90mm.jpg?v=1590253951","width":475},{"alt":null,"id":751927033946,"position":2,"preview_image":{"aspect_ratio":1.0,"height":475,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Purple_BoFee_Bear_e5210e50-f310-4475-9828-b57586300e09.jpeg?v=1569043923"},"aspect_ratio":1.0,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Purple_BoFee_Bear_e5210e50-f310-4475-9828-b57586300e09.jpeg?v=1569043923","width":475},{"alt":null,"id":772716855386,"position":3,"preview_image":{"aspect_ratio":0.992,"height":475,"width":471,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_e47c054b-d790-40bb-9c0e-fffaebf4e38c.jpeg?v=1569047864"},"aspect_ratio":0.992,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_e47c054b-d790-40bb-9c0e-fffaebf4e38c.jpeg?v=1569047864","width":471},{"alt":null,"id":772716822618,"position":4,"preview_image":{"aspect_ratio":1.015,"height":468,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_753ac4db-4858-4da6-ae00-d259753a3623.jpeg?v=1569047864"},"aspect_ratio":1.015,"height":468,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_753ac4db-4858-4da6-ae00-d259753a3623.jpeg?v=1569047864","width":475},{"alt":null,"id":772716888154,"position":5,"preview_image":{"aspect_ratio":0.488,"height":475,"width":232,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_e7e912d8-94e3-4693-9740-6286d104cbe8.jpeg?v=1569047864"},"aspect_ratio":0.488,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_e7e912d8-94e3-4693-9740-6286d104cbe8.jpeg?v=1569047864","width":232}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEngineer grade\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEasy to use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDurable \u0026amp; tough\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eImpact \u0026amp; heat resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eIndoor \u0026amp; outdoor uses\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCompatible with most 3D printers on the market\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCertified by SGS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eBacked by our 15 days warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eIf you're interested in maintaining your filaments in top condition, check out our \u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!product-care\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eFilament Care page\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eHealth Check\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eIf you are suffering from any of the symptoms below, you might be \"overexposure to VOCs\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEye, nose and throat irritation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eHeadache, loss of concentration and nausea\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eAllergic skin reaction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDizziness\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eSETTINGS\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eAt BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eOur Recommendation Settings\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eExtrusion temperature: 250 to 260 C\u003cbr\u003e Print bed temperature: 110 to 120 C\u003cbr\u003e Print speed: 30 to 90 mm\/sec\u003cbr\u003e Layer thickness: 0.05 to 0.40 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eFor more tricks and tips, please refer to our page: \u003ca href=\"https:\/\/botfeeder.ca\/blogs\/tips-tricks-and-guides\/how-to-print-with-botfeeder-abs\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eHow to print with BotFeeder ABS?\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eDELIVERY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!shipping-delivery\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View our full list of delivery rates to the USA and Canada.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eWe usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003e15 DAYS WARRANTY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eBotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!60-days-warranty\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View more information\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e"}
-
{"id":685650804764,"title":"1kg ABS Filament 2.90mm – Green","handle":"1kg-abs-filament-2-90mm-green","description":"\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEngineer grade\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEasy to use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDurable \u0026amp; tough\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eImpact \u0026amp; heat resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eIndoor \u0026amp; outdoor uses\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCompatible with most 3D printers on the market\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCertified by SGS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eBacked by our 15 days warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eIf you're interested in maintaining your filaments in top condition, check out our \u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!product-care\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eFilament Care page\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eHealth Check\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eIf you are suffering from any of the symptoms below, you might be \"overexposure to VOCs\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEye, nose and throat irritation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eHeadache, loss of concentration and nausea\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eAllergic skin reaction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDizziness\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eSETTINGS\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eAt BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eOur Recommendation Settings\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eExtrusion temperature: 250 to 260 C\u003cbr\u003e Print bed temperature: 110 to 120 C\u003cbr\u003e Print speed: 30 to 90 mm\/sec\u003cbr\u003e Layer thickness: 0.05 to 0.40 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eFor more tricks and tips, please refer to our page: \u003ca href=\"https:\/\/botfeeder.ca\/blogs\/tips-tricks-and-guides\/how-to-print-with-botfeeder-abs\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eHow to print with BotFeeder ABS?\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eDELIVERY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!shipping-delivery\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View our full list of delivery rates to the USA and Canada.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eWe usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003e15 DAYS WARRANTY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eBotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!60-days-warranty\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View more information\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","published_at":"2017-09-16T16:03:39-04:00","created_at":"2018-03-23T12:49:56-04:00","vendor":"BotFeeder","type":"ABS","tags":["1kg","2.90mm","3D Printer Filament","700g to 1kg","ABS","For Fun","For Work","Green","Opaque"],"price":1499,"price_min":1499,"price_max":1499,"available":true,"price_varies":false,"compare_at_price":2499,"compare_at_price_min":2499,"compare_at_price_max":2499,"compare_at_price_varies":false,"variants":[{"id":8026617151516,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0550","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"1kg ABS Filament 2.90mm – Green","public_title":null,"options":["Default Title"],"price":1499,"weight":1670,"compare_at_price":2499,"inventory_quantity":31,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentGreen2.90mm.jpg?v=1590253900","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Green_BoFee_Bear_fddfd9ef-dedb-4058-bad1-d37d768c3fac.jpeg?v=1590253900","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_13c1f865-5906-44eb-a55b-ec95f3fc7488.jpeg?v=1590253900","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_ac66ff2e-b758-4d12-addf-0aa6af30c6d8.jpeg?v=1590253900","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_8383a4ea-8e49-48e6-9b1d-6ce702212f1d.jpeg?v=1590253900"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentGreen2.90mm.jpg?v=1590253900","options":["Title"],"media":[{"alt":null,"id":9111826432150,"position":1,"preview_image":{"aspect_ratio":1.0,"height":475,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentGreen2.90mm.jpg?v=1590253899"},"aspect_ratio":1.0,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentGreen2.90mm.jpg?v=1590253899","width":475},{"alt":null,"id":751926902874,"position":2,"preview_image":{"aspect_ratio":1.0,"height":475,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Green_BoFee_Bear_fddfd9ef-dedb-4058-bad1-d37d768c3fac.jpeg?v=1569043923"},"aspect_ratio":1.0,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Green_BoFee_Bear_fddfd9ef-dedb-4058-bad1-d37d768c3fac.jpeg?v=1569043923","width":475},{"alt":null,"id":772716593242,"position":3,"preview_image":{"aspect_ratio":0.992,"height":475,"width":471,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_13c1f865-5906-44eb-a55b-ec95f3fc7488.jpeg?v=1569047864"},"aspect_ratio":0.992,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_13c1f865-5906-44eb-a55b-ec95f3fc7488.jpeg?v=1569047864","width":471},{"alt":null,"id":772716527706,"position":4,"preview_image":{"aspect_ratio":1.015,"height":468,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_ac66ff2e-b758-4d12-addf-0aa6af30c6d8.jpeg?v=1569047864"},"aspect_ratio":1.015,"height":468,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_ac66ff2e-b758-4d12-addf-0aa6af30c6d8.jpeg?v=1569047864","width":475},{"alt":null,"id":772716626010,"position":5,"preview_image":{"aspect_ratio":0.488,"height":475,"width":232,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_8383a4ea-8e49-48e6-9b1d-6ce702212f1d.jpeg?v=1569047864"},"aspect_ratio":0.488,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_8383a4ea-8e49-48e6-9b1d-6ce702212f1d.jpeg?v=1569047864","width":232}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEngineer grade\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEasy to use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDurable \u0026amp; tough\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eImpact \u0026amp; heat resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eIndoor \u0026amp; outdoor uses\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCompatible with most 3D printers on the market\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCertified by SGS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eBacked by our 15 days warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eIf you're interested in maintaining your filaments in top condition, check out our \u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!product-care\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eFilament Care page\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eHealth Check\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eIf you are suffering from any of the symptoms below, you might be \"overexposure to VOCs\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEye, nose and throat irritation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eHeadache, loss of concentration and nausea\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eAllergic skin reaction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDizziness\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eSETTINGS\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eAt BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eOur Recommendation Settings\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eExtrusion temperature: 250 to 260 C\u003cbr\u003e Print bed temperature: 110 to 120 C\u003cbr\u003e Print speed: 30 to 90 mm\/sec\u003cbr\u003e Layer thickness: 0.05 to 0.40 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eFor more tricks and tips, please refer to our page: \u003ca href=\"https:\/\/botfeeder.ca\/blogs\/tips-tricks-and-guides\/how-to-print-with-botfeeder-abs\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eHow to print with BotFeeder ABS?\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eDELIVERY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!shipping-delivery\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View our full list of delivery rates to the USA and Canada.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eWe usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003e15 DAYS WARRANTY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eBotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!60-days-warranty\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View more information\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e"}
- Engineer grade
- Easy to use
- Durable & tough
- Impact & heat resistance
- Indoor & outdoor uses
- Compatible with most 3D printers on the market
- Certified by SGS
- Backed by our 15 days warranty
If you're interested in maintaining your filaments in top condition, check out our Filament Care page.
Health Check
If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".
- Eye, nose and throat irritation
- Headache, loss of concentration and nausea
- Allergic skin reaction
- Dizziness
SETTINGS
At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.
Our Recommendation Settings
Extrusion temperature: 250 to 260 C
Print bed temperature: 110 to 120 C
Print speed: 30 to 90 mm/sec
Layer thickness: 0.05 to 0.40 mm
For more tricks and tips, please refer to our page: How to print with BotFeeder ABS?
DELIVERY
> View our full list of delivery rates to the USA and Canada.
We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.
For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.
For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.
15 DAYS WARRANTY
BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.
$14.99 CAD
$24.99 CAD
-
{"id":685650804764,"title":"1kg ABS Filament 2.90mm – Green","handle":"1kg-abs-filament-2-90mm-green","description":"\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEngineer grade\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEasy to use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDurable \u0026amp; tough\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eImpact \u0026amp; heat resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eIndoor \u0026amp; outdoor uses\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCompatible with most 3D printers on the market\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCertified by SGS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eBacked by our 15 days warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eIf you're interested in maintaining your filaments in top condition, check out our \u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!product-care\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eFilament Care page\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eHealth Check\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eIf you are suffering from any of the symptoms below, you might be \"overexposure to VOCs\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEye, nose and throat irritation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eHeadache, loss of concentration and nausea\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eAllergic skin reaction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDizziness\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eSETTINGS\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eAt BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eOur Recommendation Settings\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eExtrusion temperature: 250 to 260 C\u003cbr\u003e Print bed temperature: 110 to 120 C\u003cbr\u003e Print speed: 30 to 90 mm\/sec\u003cbr\u003e Layer thickness: 0.05 to 0.40 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eFor more tricks and tips, please refer to our page: \u003ca href=\"https:\/\/botfeeder.ca\/blogs\/tips-tricks-and-guides\/how-to-print-with-botfeeder-abs\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eHow to print with BotFeeder ABS?\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eDELIVERY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!shipping-delivery\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View our full list of delivery rates to the USA and Canada.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eWe usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003e15 DAYS WARRANTY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eBotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!60-days-warranty\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View more information\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","published_at":"2017-09-16T16:03:39-04:00","created_at":"2018-03-23T12:49:56-04:00","vendor":"BotFeeder","type":"ABS","tags":["1kg","2.90mm","3D Printer Filament","700g to 1kg","ABS","For Fun","For Work","Green","Opaque"],"price":1499,"price_min":1499,"price_max":1499,"available":true,"price_varies":false,"compare_at_price":2499,"compare_at_price_min":2499,"compare_at_price_max":2499,"compare_at_price_varies":false,"variants":[{"id":8026617151516,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0550","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"1kg ABS Filament 2.90mm – Green","public_title":null,"options":["Default Title"],"price":1499,"weight":1670,"compare_at_price":2499,"inventory_quantity":31,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentGreen2.90mm.jpg?v=1590253900","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Green_BoFee_Bear_fddfd9ef-dedb-4058-bad1-d37d768c3fac.jpeg?v=1590253900","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_13c1f865-5906-44eb-a55b-ec95f3fc7488.jpeg?v=1590253900","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_ac66ff2e-b758-4d12-addf-0aa6af30c6d8.jpeg?v=1590253900","\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_8383a4ea-8e49-48e6-9b1d-6ce702212f1d.jpeg?v=1590253900"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentGreen2.90mm.jpg?v=1590253900","options":["Title"],"media":[{"alt":null,"id":9111826432150,"position":1,"preview_image":{"aspect_ratio":1.0,"height":475,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentGreen2.90mm.jpg?v=1590253899"},"aspect_ratio":1.0,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeederABSFilamentGreen2.90mm.jpg?v=1590253899","width":475},{"alt":null,"id":751926902874,"position":2,"preview_image":{"aspect_ratio":1.0,"height":475,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Green_BoFee_Bear_fddfd9ef-dedb-4058-bad1-d37d768c3fac.jpeg?v=1569043923"},"aspect_ratio":1.0,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/ABS_Green_BoFee_Bear_fddfd9ef-dedb-4058-bad1-d37d768c3fac.jpeg?v=1569043923","width":475},{"alt":null,"id":772716593242,"position":3,"preview_image":{"aspect_ratio":0.992,"height":475,"width":471,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_13c1f865-5906-44eb-a55b-ec95f3fc7488.jpeg?v=1569047864"},"aspect_ratio":0.992,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Front_475x475_13c1f865-5906-44eb-a55b-ec95f3fc7488.jpeg?v=1569047864","width":471},{"alt":null,"id":772716527706,"position":4,"preview_image":{"aspect_ratio":1.015,"height":468,"width":475,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_ac66ff2e-b758-4d12-addf-0aa6af30c6d8.jpeg?v=1569047864"},"aspect_ratio":1.015,"height":468,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Back_475x475_ac66ff2e-b758-4d12-addf-0aa6af30c6d8.jpeg?v=1569047864","width":475},{"alt":null,"id":772716626010,"position":5,"preview_image":{"aspect_ratio":0.488,"height":475,"width":232,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_8383a4ea-8e49-48e6-9b1d-6ce702212f1d.jpeg?v=1569047864"},"aspect_ratio":0.488,"height":475,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2367\/5463\/products\/BotFeeder_Box_Side_475x230_8383a4ea-8e49-48e6-9b1d-6ce702212f1d.jpeg?v=1569047864","width":232}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEngineer grade\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEasy to use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDurable \u0026amp; tough\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eImpact \u0026amp; heat resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eIndoor \u0026amp; outdoor uses\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCompatible with most 3D printers on the market\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eCertified by SGS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eBacked by our 15 days warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eIf you're interested in maintaining your filaments in top condition, check out our \u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!product-care\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eFilament Care page\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eHealth Check\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eIf you are suffering from any of the symptoms below, you might be \"overexposure to VOCs\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eEye, nose and throat irritation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eHeadache, loss of concentration and nausea\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eAllergic skin reaction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 18px;\"\u003eDizziness\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eSETTINGS\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eAt BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px; font-weight: 600;\"\u003eOur Recommendation Settings\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eExtrusion temperature: 250 to 260 C\u003cbr\u003e Print bed temperature: 110 to 120 C\u003cbr\u003e Print speed: 30 to 90 mm\/sec\u003cbr\u003e Layer thickness: 0.05 to 0.40 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eFor more tricks and tips, please refer to our page: \u003ca href=\"https:\/\/botfeeder.ca\/blogs\/tips-tricks-and-guides\/how-to-print-with-botfeeder-abs\" target=\"blank\"\u003e\u003cspan style=\"color: #41b2ec;\"\u003eHow to print with BotFeeder ABS?\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003eDELIVERY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!shipping-delivery\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View our full list of delivery rates to the USA and Canada.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eWe usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eFor orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 12px;\"\u003e15 DAYS WARRANTY\u003c\/span\u003e\u003c\/h5\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18px;\"\u003eBotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/botfeeder.ca\/apps\/help-center#!60-days-warranty\" target=\"blank\"\u003e\u003cspan style=\"font-size: 12px; color: #41b2ec;\"\u003e\u0026gt; View more information\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e"}
- Engineer grade
- Easy to use
- Durable & tough
- Impact & heat resistance
- Indoor & outdoor uses
- Compatible with most 3D printers on the market
- Certified by SGS
- Backed by our 15 days warranty
If you're interested in maintaining your filaments in top condition, check out our Filament Care page.
Health Check
If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".
- Eye, nose and throat irritation
- Headache, loss of concentration and nausea
- Allergic skin reaction
- Dizziness
SETTINGS
At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.
Our Recommendation Settings
Extrusion temperature: 250 to 260 C
Print bed temperature: 110 to 120 C
Print speed: 30 to 90 mm/sec
Layer thickness: 0.05 to 0.40 mm
For more tricks and tips, please refer to our page: How to print with BotFeeder ABS?
DELIVERY
> View our full list of delivery rates to the USA and Canada.
We usually dispatch orders same day or the next working day. Delivery time vary based on selected service and destination.
For orders within Canada, we use Purolator Ground or Canada Post or Loomis Ground or BotFeeder Ground as our normal shipping service. It usually takes 2-5 business days with tracking.
For orders in the USA, we use USPS or Purolator USA service. It usually takes 4-7 business days with tracking if no delay in US customs.
15 DAYS WARRANTY
BotFeeder products are warranted to be free from defects in materials for fifteen days from original date of purchase when used under normal conditions and for the purpose intended.
Sold Out
Items 1 to 10 of 10 total
Compatibility
Compatible with most 3D printers. Our testlab includes Ulitmaker, Creality, Pursa, MakerBot, and more.
100% Satisfaction
All BotFeeder Filaments are made with highest quality standard to bring you the most satisfaction.
15 Days Money Back
To prove our confidence in the products we provide and their value to you, we are offering a 60-day, money-back guarantee.
Fast & Easy Shipping
To Canada or USA, we provide expedited shipping to all orders. Handle with care.
Need Help?
If you have any question, contact our filament specialist team here.