Best Sellers

BotFeeder Original PLA Filament

Kids Friendly
Minimized VOC Emissions
0 Toxic Additive Added
~100% PLA
Compatible with most 3D printers on the market


Health Check

If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

  • Eye, nose and throat irritation
  • Headache, loss of concentration and nausea
  • Allergic skin reaction
  • Dizziness
    Temp. & Tips

    At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


    Our Setting Profile

    3D printer type: delta
    Nozzle size: 0.30 mm
    Resolution: 0.10 mm
    Extrusion temperature: 200 C
    Print bed temperature: 65 C
    Print speed: 65 mm/sec (default speed)
    Adhesion type: brim
    Retraction distance: 4.5 mm
    Retraction speed: 100 mm/sec
    Prime: no
    Support infill: 15%
    Support pattern: zig zag
    Support angle: 50 degree
    Dense support layer: 2
    Dense Infill: 60%
    Upper separation layer: 1 to 2 (or 0.20 mm)
    Lower separation layer: 1 to 2 (or 0.20 mm)


    Printing Notes

    1. Extrusion Temperature: 200 to 220C
    2. Print Bed Temperature: 60 to 70C (optional)
    3. If you are printing white at 200C, black will require ~5 degree more.
    4. Metallic should be printing with black setting.
    5. Transparent needs the less energy to extrude.
    6. Retraction settings: 4.5 mm @ 100 mm/sec.
    7. Let print bed cool down to room temperature before removing your print.
    8. Works great on glass platform, PEI, blue tape, buildtak, and kapton tape.
    9. Adhesion solution: hair spray, ABS juice, and glue stick.
    10. Can be printed without heated print bed.
    11. If wrapping occurs, print using raft.
    12. First layer usually 5 to 10 C higher than subsequent layers.
    13. First layer usually print at 35mm/sec or slower.
    14. PLA absorbs heat and so benefits from additional active cooling.
    15. PLA adsorbs moisture.  Un-used spool should store in container or plastic bag.
    16. Use sandpaper to smooth out the print.
    17. Can be painted with acrylic without post processing.
    18. Can also read our article on how to print with BotFeeder PLA

    Materials Quality

    Material Grade: NatureWorks 4032D
    Filament Diameter: 1.75mm
    Diameter Tolerance: +/- 0.03mm
    Roundness Tolerance: +/- 0.05mm
    Filament Weight: 1kg (700g for metallic & silky pearl)
    Spool Length x Width: 190mm x 85mm
    Spool Hole Diameter: 38mm
    Spool Weight: 500g

    BotFeeder PLA Black Filament Dimension


    BotFeeder Original PLA is Made to Perfection.


    Raw Material

    The premium PLA grade is selected based on providing the safest printing experience. All virgin PLA pellets are supplied by NatureWorks LLC, a globally well-known company manufactures Ingeo brand polylactic acid (PLA).


    Natural Color Pigment

    All color pigments are extracted from nature. NOT chemical engineered pigment.  During the process of 3D printing, you'll noticed a pleasant sweet scent in the air.


    Filtration Treatment

    Before production, all PLA pellets and color pigments undergo a filtration process to remove any larger particles that might clogged the nozzle during printing.


    Anti-Moist Treatment

    All raw materials have undergone dying treatment before production, as the practice of which prevents 'bubbles' occurrence during extrusion due to moisture content within the raw materials.


    Coloring Masterbatch

    Identical colors from spool to spool.


    Diameter Control

    An important machine in our production are the laser measurement systems used to check the diameter of our filament real time during production. It’s measured over 1000 times per second and helps us guarantee that each spool of BotFeeder 3d printing filament produced within tolerance. We can guarantee 0.03mm +/- on both 2.90mm and 1.75mm BotFeeder 3D Printer Filament, which means you can rest assured that your printer is extruding the exact amount of material.


    Enhanced Spool Holder

    In combination with a specially design spool and stronger material the BotFeeder spool is able to withstand the impact from dropping on the floor. From an in-house test, a typical 1kg spool of filament did not break/snap after 12 drops.


    Vacuum Sealed Packaging

    Within minutes of production a spool of BotFeeder 3d printing filament is wrapped with a protective film and then sealed airtight with a double barrier foil. To ensure minimal moisture, we upgraded to a large pack of desiccant.  To go the extra mile, we’ll also seal the fancy cardboard box that we use to ship our product. You can make sure BotFeeder 3d printing filament is fresh and ready for 3d printing when you’re done unboxing.


    BotFeeder Filament Packaging


    In-House Production

    All BotFeeder 3D Printer Filaments are produced in our own production facility, situated in the Taiwan. Since no external parties are involved in the making of BotFeeder filament we can ensure consistent quality on every order.


    In-House Testing

    The BotFeeder Testlab features a wide range of popular 3D printers. We’re continuously testing on our 3D printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community. If your not sure how to print with our materials on your 3D printer, please contact us at support@botfeeder.ca


    The following printers are used in our lab

    • Ultimaker Original
    • Ultimaker 2
    • Makerbot Replicator 2X
    • Lulzbot Mini
    • Original Pursa I3
    • Creality CR-10
    • Solidoodle 3
    • UFO Standard (Delta & E3D hot-end)
    • Rapidbot 2

    Companies who are interested in having their 3D printer(s) featured in our testlab can contact us at support@botfeeder.ca


    Care

    Storing Your Filament

    Please note that improper storage may damage your filament. To maintain its original quality, it's strongly recommended that the filament be stored in the following conditions:

    • A dehumidifier cabinet or a dry and circulated area
    • Room temperature
    • Avoid direct sunlight or heat source

    Selecting A Printer Location

    Please note poor printer location will have a negative effect on your print result and possible of damaging your filament. To select the most ideal location for your printer, please follow this guide.

    • Consistent temperature
    • Stable air flow
    • Away from furniture for safety

    Avoid Tangling Your Filament

    When unpacking, changing filament or unloading, It is strongly suggested to get a good grip at the end of the filament at all times in order to prevent tangling. The spool holder is specifically designed with 2 holes of each side, allowing you to secure the end of the filament by threading into it. or you can simply 3D print a "Filament clip" that is attached to the spool holder itself.


    BotFeeder PLA Colour Code & Filament Tracker


    If Filament Gets Damp

    Dry it slowly in room temperature. Please note that heat drying the filament will damages its quality by making it become brittle. The preferred method of drying your filament is to put in a dehumidifier cabinet or in an airtight bag with a few packs of desiccants. It's recommended to maintain a humidity level of 25% or less.

    Certifications

    To take an extra step for your safety, BotFeeder 3D Printer Filaments are being tested on an annually basis by SGS. On top of that, all our filaments are manufactured in compliance of RoHS (Restriction of Hazardous Substances).  Why is it important?  It basically means the filaments are free from lead and other potentially hazardous substances including cadmium, mercury and chromium VI, among others.


    SGS Certification


    Material Science

    BotFeeder was founded as a brand of Liing Shian Colorant Manufacturer which have been active in the masterbatch, and pigment & chemical auxiliaries for the plastics processing industry. Our knowhow, network and partnerships is driving material innovations and quality. You can expect BotFeeder to keep on developing interesting new materials, which will be tested on a variety of printers to make sure it’ll get the job done.

      Sold Out

      BotFeeder Original PLA Filament

      Kids Friendly
      Minimized VOC Emissions
      0 Toxic Additive Added
      ~100% PLA
      Compatible with most 3D printers on the market


      Health Check

      If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

      • Eye, nose and throat irritation
      • Headache, loss of concentration and nausea
      • Allergic skin reaction
      • Dizziness
        Temp. & Tips

        At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


        Our Setting Profile

        3D printer type: delta
        Nozzle size: 0.30 mm
        Resolution: 0.10 mm
        Extrusion temperature: 200 C
        Print bed temperature: 65 C
        Print speed: 65 mm/sec (default speed)
        Adhesion type: brim
        Retraction distance: 4.5 mm
        Retraction speed: 100 mm/sec
        Prime: no
        Support infill: 15%
        Support pattern: zig zag
        Support angle: 50 degree
        Dense support layer: 2
        Dense Infill: 60%
        Upper separation layer: 1 to 2 (or 0.20 mm)
        Lower separation layer: 1 to 2 (or 0.20 mm)


        Printing Notes

        1. Extrusion Temperature: 200 to 220C
        2. Print Bed Temperature: 60 to 70C (optional)
        3. If you are printing white at 200C, black will require ~5 degree more.
        4. Metallic should be printing with black setting.
        5. Transparent needs the less energy to extrude.
        6. Retraction settings: 4.5 mm @ 100 mm/sec.
        7. Let print bed cool down to room temperature before removing your print.
        8. Works great on glass platform, PEI, blue tape, buildtak, and kapton tape.
        9. Adhesion solution: hair spray, ABS juice, and glue stick.
        10. Can be printed without heated print bed.
        11. If wrapping occurs, print using raft.
        12. First layer usually 5 to 10 C higher than subsequent layers.
        13. First layer usually print at 35mm/sec or slower.
        14. PLA absorbs heat and so benefits from additional active cooling.
        15. PLA adsorbs moisture.  Un-used spool should store in container or plastic bag.
        16. Use sandpaper to smooth out the print.
        17. Can be painted with acrylic without post processing.
        18. Can also read our article on how to print with BotFeeder PLA

        Materials Quality

        Material Grade: NatureWorks 4032D
        Filament Diameter: 1.75mm
        Diameter Tolerance: +/- 0.03mm
        Roundness Tolerance: +/- 0.05mm
        Filament Weight: 1kg (700g for metallic & silky pearl)
        Spool Length x Width: 190mm x 85mm
        Spool Hole Diameter: 38mm
        Spool Weight: 500g

        BotFeeder PLA Black Filament Dimension


        BotFeeder Original PLA is Made to Perfection.


        Raw Material

        The premium PLA grade is selected based on providing the safest printing experience. All virgin PLA pellets are supplied by NatureWorks LLC, a globally well-known company manufactures Ingeo brand polylactic acid (PLA).


        Natural Color Pigment

        All color pigments are extracted from nature. NOT chemical engineered pigment.  During the process of 3D printing, you'll noticed a pleasant sweet scent in the air.


        Filtration Treatment

        Before production, all PLA pellets and color pigments undergo a filtration process to remove any larger particles that might clogged the nozzle during printing.


        Anti-Moist Treatment

        All raw materials have undergone dying treatment before production, as the practice of which prevents 'bubbles' occurrence during extrusion due to moisture content within the raw materials.


        Coloring Masterbatch

        Identical colors from spool to spool.


        Diameter Control

        An important machine in our production are the laser measurement systems used to check the diameter of our filament real time during production. It’s measured over 1000 times per second and helps us guarantee that each spool of BotFeeder 3d printing filament produced within tolerance. We can guarantee 0.03mm +/- on both 2.90mm and 1.75mm BotFeeder 3D Printer Filament, which means you can rest assured that your printer is extruding the exact amount of material.


        Enhanced Spool Holder

        In combination with a specially design spool and stronger material the BotFeeder spool is able to withstand the impact from dropping on the floor. From an in-house test, a typical 1kg spool of filament did not break/snap after 12 drops.


        Vacuum Sealed Packaging

        Within minutes of production a spool of BotFeeder 3d printing filament is wrapped with a protective film and then sealed airtight with a double barrier foil. To ensure minimal moisture, we upgraded to a large pack of desiccant.  To go the extra mile, we’ll also seal the fancy cardboard box that we use to ship our product. You can make sure BotFeeder 3d printing filament is fresh and ready for 3d printing when you’re done unboxing.


        BotFeeder Filament Packaging


        In-House Production

        All BotFeeder 3D Printer Filaments are produced in our own production facility, situated in the Taiwan. Since no external parties are involved in the making of BotFeeder filament we can ensure consistent quality on every order.


        In-House Testing

        The BotFeeder Testlab features a wide range of popular 3D printers. We’re continuously testing on our 3D printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community. If your not sure how to print with our materials on your 3D printer, please contact us at support@botfeeder.ca


        The following printers are used in our lab

        • Ultimaker Original
        • Ultimaker 2
        • Makerbot Replicator 2X
        • Lulzbot Mini
        • Original Pursa I3
        • Creality CR-10
        • Solidoodle 3
        • UFO Standard (Delta & E3D hot-end)
        • Rapidbot 2

        Companies who are interested in having their 3D printer(s) featured in our testlab can contact us at support@botfeeder.ca


        Care

        Storing Your Filament

        Please note that improper storage may damage your filament. To maintain its original quality, it's strongly recommended that the filament be stored in the following conditions:

        • A dehumidifier cabinet or a dry and circulated area
        • Room temperature
        • Avoid direct sunlight or heat source

        Selecting A Printer Location

        Please note poor printer location will have a negative effect on your print result and possible of damaging your filament. To select the most ideal location for your printer, please follow this guide.

        • Consistent temperature
        • Stable air flow
        • Away from furniture for safety

        Avoid Tangling Your Filament

        When unpacking, changing filament or unloading, It is strongly suggested to get a good grip at the end of the filament at all times in order to prevent tangling. The spool holder is specifically designed with 2 holes of each side, allowing you to secure the end of the filament by threading into it. or you can simply 3D print a "Filament clip" that is attached to the spool holder itself.


        BotFeeder PLA Colour Code & Filament Tracker


        If Filament Gets Damp

        Dry it slowly in room temperature. Please note that heat drying the filament will damages its quality by making it become brittle. The preferred method of drying your filament is to put in a dehumidifier cabinet or in an airtight bag with a few packs of desiccants. It's recommended to maintain a humidity level of 25% or less.

        Certifications

        To take an extra step for your safety, BotFeeder 3D Printer Filaments are being tested on an annually basis by SGS. On top of that, all our filaments are manufactured in compliance of RoHS (Restriction of Hazardous Substances).  Why is it important?  It basically means the filaments are free from lead and other potentially hazardous substances including cadmium, mercury and chromium VI, among others.


        SGS Certification


        Material Science

        BotFeeder was founded as a brand of Liing Shian Colorant Manufacturer which have been active in the masterbatch, and pigment & chemical auxiliaries for the plastics processing industry. Our knowhow, network and partnerships is driving material innovations and quality. You can expect BotFeeder to keep on developing interesting new materials, which will be tested on a variety of printers to make sure it’ll get the job done.

          Sold Out
          700g PLA Filament 1.75mm – Metallic Karat Gold

          BotFeeder Original PLA Filament

          Kids Friendly
          Minimized VOC Emissions
          0 Toxic Additive Added
          ~100% PLA
          Compatible with most 3D printers on the market


          Health Check

          If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

          • Eye, nose and throat irritation
          • Headache, loss of concentration and nausea
          • Allergic skin reaction
          • Dizziness
            Temp. & Tips

            At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


            Our Setting Profile

            3D printer type: delta
            Nozzle size: 0.30 mm
            Resolution: 0.10 mm
            Extrusion temperature: 200 C
            Print bed temperature: 65 C
            Print speed: 65 mm/sec (default speed)
            Adhesion type: brim
            Retraction distance: 4.5 mm
            Retraction speed: 100 mm/sec
            Prime: no
            Support infill: 15%
            Support pattern: zig zag
            Support angle: 50 degree
            Dense support layer: 2
            Dense Infill: 60%
            Upper separation layer: 1 to 2 (or 0.20 mm)
            Lower separation layer: 1 to 2 (or 0.20 mm)


            Printing Notes

            1. Extrusion Temperature: 200 to 220C
            2. Print Bed Temperature: 60 to 70C (optional)
            3. If you are printing white at 200C, black will require ~5 degree more.
            4. Metallic should be printing with black setting.
            5. Transparent needs the less energy to extrude.
            6. Retraction settings: 4.5 mm @ 100 mm/sec.
            7. Let print bed cool down to room temperature before removing your print.
            8. Works great on glass platform, PEI, blue tape, buildtak, and kapton tape.
            9. Adhesion solution: hair spray, ABS juice, and glue stick.
            10. Can be printed without heated print bed.
            11. If wrapping occurs, print using raft.
            12. First layer usually 5 to 10 C higher than subsequent layers.
            13. First layer usually print at 35mm/sec or slower.
            14. PLA absorbs heat and so benefits from additional active cooling.
            15. PLA adsorbs moisture.  Un-used spool should store in container or plastic bag.
            16. Use sandpaper to smooth out the print.
            17. Can be painted with acrylic without post processing.
            18. Can also read our article on how to print with BotFeeder PLA

            Materials Quality

            Material Grade: NatureWorks 4032D
            Filament Diameter: 1.75mm
            Diameter Tolerance: +/- 0.03mm
            Roundness Tolerance: +/- 0.05mm
            Filament Weight: 1kg (700g for metallic & silky pearl)
            Spool Length x Width: 190mm x 85mm
            Spool Hole Diameter: 38mm
            Spool Weight: 500g

            BotFeeder PLA Black Filament Dimension


            BotFeeder Original PLA is Made to Perfection.


            Raw Material

            The premium PLA grade is selected based on providing the safest printing experience. All virgin PLA pellets are supplied by NatureWorks LLC, a globally well-known company manufactures Ingeo brand polylactic acid (PLA).


            Natural Color Pigment

            All color pigments are extracted from nature. NOT chemical engineered pigment.  During the process of 3D printing, you'll noticed a pleasant sweet scent in the air.


            Filtration Treatment

            Before production, all PLA pellets and color pigments undergo a filtration process to remove any larger particles that might clogged the nozzle during printing.


            Anti-Moist Treatment

            All raw materials have undergone dying treatment before production, as the practice of which prevents 'bubbles' occurrence during extrusion due to moisture content within the raw materials.


            Coloring Masterbatch

            Identical colors from spool to spool.


            Diameter Control

            An important machine in our production are the laser measurement systems used to check the diameter of our filament real time during production. It’s measured over 1000 times per second and helps us guarantee that each spool of BotFeeder 3d printing filament produced within tolerance. We can guarantee 0.03mm +/- on both 2.90mm and 1.75mm BotFeeder 3D Printer Filament, which means you can rest assured that your printer is extruding the exact amount of material.


            Enhanced Spool Holder

            In combination with a specially design spool and stronger material the BotFeeder spool is able to withstand the impact from dropping on the floor. From an in-house test, a typical 1kg spool of filament did not break/snap after 12 drops.


            Vacuum Sealed Packaging

            Within minutes of production a spool of BotFeeder 3d printing filament is wrapped with a protective film and then sealed airtight with a double barrier foil. To ensure minimal moisture, we upgraded to a large pack of desiccant.  To go the extra mile, we’ll also seal the fancy cardboard box that we use to ship our product. You can make sure BotFeeder 3d printing filament is fresh and ready for 3d printing when you’re done unboxing.


            BotFeeder Filament Packaging


            In-House Production

            All BotFeeder 3D Printer Filaments are produced in our own production facility, situated in the Taiwan. Since no external parties are involved in the making of BotFeeder filament we can ensure consistent quality on every order.


            In-House Testing

            The BotFeeder Testlab features a wide range of popular 3D printers. We’re continuously testing on our 3D printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community. If your not sure how to print with our materials on your 3D printer, please contact us at support@botfeeder.ca


            The following printers are used in our lab

            • Ultimaker Original
            • Ultimaker 2
            • Makerbot Replicator 2X
            • Lulzbot Mini
            • Original Pursa I3
            • Creality CR-10
            • Solidoodle 3
            • UFO Standard (Delta & E3D hot-end)
            • Rapidbot 2

            Companies who are interested in having their 3D printer(s) featured in our testlab can contact us at support@botfeeder.ca


            Care

            Storing Your Filament

            Please note that improper storage may damage your filament. To maintain its original quality, it's strongly recommended that the filament be stored in the following conditions:

            • A dehumidifier cabinet or a dry and circulated area
            • Room temperature
            • Avoid direct sunlight or heat source

            Selecting A Printer Location

            Please note poor printer location will have a negative effect on your print result and possible of damaging your filament. To select the most ideal location for your printer, please follow this guide.

            • Consistent temperature
            • Stable air flow
            • Away from furniture for safety

            Avoid Tangling Your Filament

            When unpacking, changing filament or unloading, It is strongly suggested to get a good grip at the end of the filament at all times in order to prevent tangling. The spool holder is specifically designed with 2 holes of each side, allowing you to secure the end of the filament by threading into it. or you can simply 3D print a "Filament clip" that is attached to the spool holder itself.


            BotFeeder PLA Colour Code & Filament Tracker


            If Filament Gets Damp

            Dry it slowly in room temperature. Please note that heat drying the filament will damages its quality by making it become brittle. The preferred method of drying your filament is to put in a dehumidifier cabinet or in an airtight bag with a few packs of desiccants. It's recommended to maintain a humidity level of 25% or less.

            Certifications

            To take an extra step for your safety, BotFeeder 3D Printer Filaments are being tested on an annually basis by SGS. On top of that, all our filaments are manufactured in compliance of RoHS (Restriction of Hazardous Substances).  Why is it important?  It basically means the filaments are free from lead and other potentially hazardous substances including cadmium, mercury and chromium VI, among others.


            SGS Certification


            Material Science

            BotFeeder was founded as a brand of Liing Shian Colorant Manufacturer which have been active in the masterbatch, and pigment & chemical auxiliaries for the plastics processing industry. Our knowhow, network and partnerships is driving material innovations and quality. You can expect BotFeeder to keep on developing interesting new materials, which will be tested on a variety of printers to make sure it’ll get the job done.

              $35.00 CAD
              700g PLA Filament 1.75mm – Silky Pearl Green

              BotFeeder Original PLA Filament

              Kids Friendly
              Minimized VOC Emissions
              0 Toxic Additive Added
              ~100% PLA
              Compatible with most 3D printers on the market


              Health Check

              If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

              • Eye, nose and throat irritation
              • Headache, loss of concentration and nausea
              • Allergic skin reaction
              • Dizziness
                Temp. & Tips

                At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                Our Setting Profile

                3D printer type: delta
                Nozzle size: 0.30 mm
                Resolution: 0.10 mm
                Extrusion temperature: 200 C
                Print bed temperature: 65 C
                Print speed: 65 mm/sec (default speed)
                Adhesion type: brim
                Retraction distance: 4.5 mm
                Retraction speed: 100 mm/sec
                Prime: no
                Support infill: 15%
                Support pattern: zig zag
                Support angle: 50 degree
                Dense support layer: 2
                Dense Infill: 60%
                Upper separation layer: 1 to 2 (or 0.20 mm)
                Lower separation layer: 1 to 2 (or 0.20 mm)


                Printing Notes

                1. Extrusion Temperature: 200 to 220C
                2. Print Bed Temperature: 60 to 70C (optional)
                3. If you are printing white at 200C, black will require ~5 degree more.
                4. Metallic should be printing with black setting.
                5. Transparent needs the less energy to extrude.
                6. Retraction settings: 4.5 mm @ 100 mm/sec.
                7. Let print bed cool down to room temperature before removing your print.
                8. Works great on glass platform, PEI, blue tape, buildtak, and kapton tape.
                9. Adhesion solution: hair spray, ABS juice, and glue stick.
                10. Can be printed without heated print bed.
                11. If wrapping occurs, print using raft.
                12. First layer usually 5 to 10 C higher than subsequent layers.
                13. First layer usually print at 35mm/sec or slower.
                14. PLA absorbs heat and so benefits from additional active cooling.
                15. PLA adsorbs moisture.  Un-used spool should store in container or plastic bag.
                16. Use sandpaper to smooth out the print.
                17. Can be painted with acrylic without post processing.
                18. Can also read our article on how to print with BotFeeder PLA

                Materials Quality

                Material Grade: NatureWorks 4032D
                Filament Diameter: 1.75mm
                Diameter Tolerance: +/- 0.03mm
                Roundness Tolerance: +/- 0.05mm
                Filament Weight: 1kg (700g for metallic & silky pearl)
                Spool Length x Width: 190mm x 85mm
                Spool Hole Diameter: 38mm
                Spool Weight: 500g

                BotFeeder PLA Black Filament Dimension


                BotFeeder Original PLA is Made to Perfection.


                Raw Material

                The premium PLA grade is selected based on providing the safest printing experience. All virgin PLA pellets are supplied by NatureWorks LLC, a globally well-known company manufactures Ingeo brand polylactic acid (PLA).


                Natural Color Pigment

                All color pigments are extracted from nature. NOT chemical engineered pigment.  During the process of 3D printing, you'll noticed a pleasant sweet scent in the air.


                Filtration Treatment

                Before production, all PLA pellets and color pigments undergo a filtration process to remove any larger particles that might clogged the nozzle during printing.


                Anti-Moist Treatment

                All raw materials have undergone dying treatment before production, as the practice of which prevents 'bubbles' occurrence during extrusion due to moisture content within the raw materials.


                Coloring Masterbatch

                Identical colors from spool to spool.


                Diameter Control

                An important machine in our production are the laser measurement systems used to check the diameter of our filament real time during production. It’s measured over 1000 times per second and helps us guarantee that each spool of BotFeeder 3d printing filament produced within tolerance. We can guarantee 0.03mm +/- on both 2.90mm and 1.75mm BotFeeder 3D Printer Filament, which means you can rest assured that your printer is extruding the exact amount of material.


                Enhanced Spool Holder

                In combination with a specially design spool and stronger material the BotFeeder spool is able to withstand the impact from dropping on the floor. From an in-house test, a typical 1kg spool of filament did not break/snap after 12 drops.


                Vacuum Sealed Packaging

                Within minutes of production a spool of BotFeeder 3d printing filament is wrapped with a protective film and then sealed airtight with a double barrier foil. To ensure minimal moisture, we upgraded to a large pack of desiccant.  To go the extra mile, we’ll also seal the fancy cardboard box that we use to ship our product. You can make sure BotFeeder 3d printing filament is fresh and ready for 3d printing when you’re done unboxing.


                BotFeeder Filament Packaging


                In-House Production

                All BotFeeder 3D Printer Filaments are produced in our own production facility, situated in the Taiwan. Since no external parties are involved in the making of BotFeeder filament we can ensure consistent quality on every order.


                In-House Testing

                The BotFeeder Testlab features a wide range of popular 3D printers. We’re continuously testing on our 3D printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community. If your not sure how to print with our materials on your 3D printer, please contact us at support@botfeeder.ca


                The following printers are used in our lab

                • Ultimaker Original
                • Ultimaker 2
                • Makerbot Replicator 2X
                • Lulzbot Mini
                • Original Pursa I3
                • Creality CR-10
                • Solidoodle 3
                • UFO Standard (Delta & E3D hot-end)
                • Rapidbot 2

                Companies who are interested in having their 3D printer(s) featured in our testlab can contact us at support@botfeeder.ca


                Care

                Storing Your Filament

                Please note that improper storage may damage your filament. To maintain its original quality, it's strongly recommended that the filament be stored in the following conditions:

                • A dehumidifier cabinet or a dry and circulated area
                • Room temperature
                • Avoid direct sunlight or heat source

                Selecting A Printer Location

                Please note poor printer location will have a negative effect on your print result and possible of damaging your filament. To select the most ideal location for your printer, please follow this guide.

                • Consistent temperature
                • Stable air flow
                • Away from furniture for safety

                Avoid Tangling Your Filament

                When unpacking, changing filament or unloading, It is strongly suggested to get a good grip at the end of the filament at all times in order to prevent tangling. The spool holder is specifically designed with 2 holes of each side, allowing you to secure the end of the filament by threading into it. or you can simply 3D print a "Filament clip" that is attached to the spool holder itself.


                BotFeeder PLA Colour Code & Filament Tracker


                If Filament Gets Damp

                Dry it slowly in room temperature. Please note that heat drying the filament will damages its quality by making it become brittle. The preferred method of drying your filament is to put in a dehumidifier cabinet or in an airtight bag with a few packs of desiccants. It's recommended to maintain a humidity level of 25% or less.

                Certifications

                To take an extra step for your safety, BotFeeder 3D Printer Filaments are being tested on an annually basis by SGS. On top of that, all our filaments are manufactured in compliance of RoHS (Restriction of Hazardous Substances).  Why is it important?  It basically means the filaments are free from lead and other potentially hazardous substances including cadmium, mercury and chromium VI, among others.


                SGS Certification


                Material Science

                BotFeeder was founded as a brand of Liing Shian Colorant Manufacturer which have been active in the masterbatch, and pigment & chemical auxiliaries for the plastics processing industry. Our knowhow, network and partnerships is driving material innovations and quality. You can expect BotFeeder to keep on developing interesting new materials, which will be tested on a variety of printers to make sure it’ll get the job done.

                  $35.00 CAD
                  1kg PLA Filament 1.75mm – Light Tan (Skin)

                  BotFeeder Original PLA Filament

                  Kids Friendly
                  Minimized VOC Emissions
                  0 Toxic Additive Added
                  ~100% PLA
                  Compatible with most 3D printers on the market


                  Health Check

                  If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                  • Eye, nose and throat irritation
                  • Headache, loss of concentration and nausea
                  • Allergic skin reaction
                  • Dizziness
                    Temp. & Tips

                    At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                    Our Setting Profile

                    3D printer type: delta
                    Nozzle size: 0.30 mm
                    Resolution: 0.10 mm
                    Extrusion temperature: 200 C
                    Print bed temperature: 65 C
                    Print speed: 65 mm/sec (default speed)
                    Adhesion type: brim
                    Retraction distance: 4.5 mm
                    Retraction speed: 100 mm/sec
                    Prime: no
                    Support infill: 15%
                    Support pattern: zig zag
                    Support angle: 50 degree
                    Dense support layer: 2
                    Dense Infill: 60%
                    Upper separation layer: 1 to 2 (or 0.20 mm)
                    Lower separation layer: 1 to 2 (or 0.20 mm)


                    Printing Notes

                    1. Extrusion Temperature: 200 to 220C
                    2. Print Bed Temperature: 60 to 70C (optional)
                    3. If you are printing white at 200C, black will require ~5 degree more.
                    4. Metallic should be printing with black setting.
                    5. Transparent needs the less energy to extrude.
                    6. Retraction settings: 4.5 mm @ 100 mm/sec.
                    7. Let print bed cool down to room temperature before removing your print.
                    8. Works great on glass platform, PEI, blue tape, buildtak, and kapton tape.
                    9. Adhesion solution: hair spray, ABS juice, and glue stick.
                    10. Can be printed without heated print bed.
                    11. If wrapping occurs, print using raft.
                    12. First layer usually 5 to 10 C higher than subsequent layers.
                    13. First layer usually print at 35mm/sec or slower.
                    14. PLA absorbs heat and so benefits from additional active cooling.
                    15. PLA adsorbs moisture.  Un-used spool should store in container or plastic bag.
                    16. Use sandpaper to smooth out the print.
                    17. Can be painted with acrylic without post processing.
                    18. Can also read our article on how to print with BotFeeder PLA

                    Materials Quality

                    Material Grade: NatureWorks 4032D
                    Filament Diameter: 1.75mm
                    Diameter Tolerance: +/- 0.03mm
                    Roundness Tolerance: +/- 0.05mm
                    Filament Weight: 1kg (700g for metallic & silky pearl)
                    Spool Length x Width: 190mm x 85mm
                    Spool Hole Diameter: 38mm
                    Spool Weight: 500g

                    BotFeeder PLA Black Filament Dimension


                    BotFeeder Original PLA is Made to Perfection.


                    Raw Material

                    The premium PLA grade is selected based on providing the safest printing experience. All virgin PLA pellets are supplied by NatureWorks LLC, a globally well-known company manufactures Ingeo brand polylactic acid (PLA).


                    Natural Color Pigment

                    All color pigments are extracted from nature. NOT chemical engineered pigment.  During the process of 3D printing, you'll noticed a pleasant sweet scent in the air.


                    Filtration Treatment

                    Before production, all PLA pellets and color pigments undergo a filtration process to remove any larger particles that might clogged the nozzle during printing.


                    Anti-Moist Treatment

                    All raw materials have undergone dying treatment before production, as the practice of which prevents 'bubbles' occurrence during extrusion due to moisture content within the raw materials.


                    Coloring Masterbatch

                    Identical colors from spool to spool.


                    Diameter Control

                    An important machine in our production are the laser measurement systems used to check the diameter of our filament real time during production. It’s measured over 1000 times per second and helps us guarantee that each spool of BotFeeder 3d printing filament produced within tolerance. We can guarantee 0.03mm +/- on both 2.90mm and 1.75mm BotFeeder 3D Printer Filament, which means you can rest assured that your printer is extruding the exact amount of material.


                    Enhanced Spool Holder

                    In combination with a specially design spool and stronger material the BotFeeder spool is able to withstand the impact from dropping on the floor. From an in-house test, a typical 1kg spool of filament did not break/snap after 12 drops.


                    Vacuum Sealed Packaging

                    Within minutes of production a spool of BotFeeder 3d printing filament is wrapped with a protective film and then sealed airtight with a double barrier foil. To ensure minimal moisture, we upgraded to a large pack of desiccant.  To go the extra mile, we’ll also seal the fancy cardboard box that we use to ship our product. You can make sure BotFeeder 3d printing filament is fresh and ready for 3d printing when you’re done unboxing.


                    BotFeeder Filament Packaging


                    In-House Production

                    All BotFeeder 3D Printer Filaments are produced in our own production facility, situated in the Taiwan. Since no external parties are involved in the making of BotFeeder filament we can ensure consistent quality on every order.


                    In-House Testing

                    The BotFeeder Testlab features a wide range of popular 3D printers. We’re continuously testing on our 3D printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community. If your not sure how to print with our materials on your 3D printer, please contact us at support@botfeeder.ca


                    The following printers are used in our lab

                    • Ultimaker Original
                    • Ultimaker 2
                    • Makerbot Replicator 2X
                    • Lulzbot Mini
                    • Original Pursa I3
                    • Creality CR-10
                    • Solidoodle 3
                    • UFO Standard (Delta & E3D hot-end)
                    • Rapidbot 2

                    Companies who are interested in having their 3D printer(s) featured in our testlab can contact us at support@botfeeder.ca


                    Care

                    Storing Your Filament

                    Please note that improper storage may damage your filament. To maintain its original quality, it's strongly recommended that the filament be stored in the following conditions:

                    • A dehumidifier cabinet or a dry and circulated area
                    • Room temperature
                    • Avoid direct sunlight or heat source

                    Selecting A Printer Location

                    Please note poor printer location will have a negative effect on your print result and possible of damaging your filament. To select the most ideal location for your printer, please follow this guide.

                    • Consistent temperature
                    • Stable air flow
                    • Away from furniture for safety

                    Avoid Tangling Your Filament

                    When unpacking, changing filament or unloading, It is strongly suggested to get a good grip at the end of the filament at all times in order to prevent tangling. The spool holder is specifically designed with 2 holes of each side, allowing you to secure the end of the filament by threading into it. or you can simply 3D print a "Filament clip" that is attached to the spool holder itself.


                    BotFeeder PLA Colour Code & Filament Tracker


                    If Filament Gets Damp

                    Dry it slowly in room temperature. Please note that heat drying the filament will damages its quality by making it become brittle. The preferred method of drying your filament is to put in a dehumidifier cabinet or in an airtight bag with a few packs of desiccants. It's recommended to maintain a humidity level of 25% or less.

                    Certifications

                    To take an extra step for your safety, BotFeeder 3D Printer Filaments are being tested on an annually basis by SGS. On top of that, all our filaments are manufactured in compliance of RoHS (Restriction of Hazardous Substances).  Why is it important?  It basically means the filaments are free from lead and other potentially hazardous substances including cadmium, mercury and chromium VI, among others.


                    SGS Certification


                    Material Science

                    BotFeeder was founded as a brand of Liing Shian Colorant Manufacturer which have been active in the masterbatch, and pigment & chemical auxiliaries for the plastics processing industry. Our knowhow, network and partnerships is driving material innovations and quality. You can expect BotFeeder to keep on developing interesting new materials, which will be tested on a variety of printers to make sure it’ll get the job done.

                      $35.00 CAD

                      BotFeeder Original PLA Filament

                      Kids Friendly
                      Minimized VOC Emissions
                      0 Toxic Additive Added
                      ~100% PLA
                      Compatible with most 3D printers on the market


                      Health Check

                      If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                      • Eye, nose and throat irritation
                      • Headache, loss of concentration and nausea
                      • Allergic skin reaction
                      • Dizziness
                        Temp. & Tips

                        At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                        Our Setting Profile

                        3D printer type: delta
                        Nozzle size: 0.30 mm
                        Resolution: 0.10 mm
                        Extrusion temperature: 200 C
                        Print bed temperature: 65 C
                        Print speed: 65 mm/sec (default speed)
                        Adhesion type: brim
                        Retraction distance: 4.5 mm
                        Retraction speed: 100 mm/sec
                        Prime: no
                        Support infill: 15%
                        Support pattern: zig zag
                        Support angle: 50 degree
                        Dense support layer: 2
                        Dense Infill: 60%
                        Upper separation layer: 1 to 2 (or 0.20 mm)
                        Lower separation layer: 1 to 2 (or 0.20 mm)


                        Printing Notes

                        1. Extrusion Temperature: 200 to 220C
                        2. Print Bed Temperature: 60 to 70C (optional)
                        3. If you are printing white at 200C, black will require ~5 degree more.
                        4. Metallic should be printing with black setting.
                        5. Transparent needs the less energy to extrude.
                        6. Retraction settings: 4.5 mm @ 100 mm/sec.
                        7. Let print bed cool down to room temperature before removing your print.
                        8. Works great on glass platform, PEI, blue tape, buildtak, and kapton tape.
                        9. Adhesion solution: hair spray, ABS juice, and glue stick.
                        10. Can be printed without heated print bed.
                        11. If wrapping occurs, print using raft.
                        12. First layer usually 5 to 10 C higher than subsequent layers.
                        13. First layer usually print at 35mm/sec or slower.
                        14. PLA absorbs heat and so benefits from additional active cooling.
                        15. PLA adsorbs moisture.  Un-used spool should store in container or plastic bag.
                        16. Use sandpaper to smooth out the print.
                        17. Can be painted with acrylic without post processing.
                        18. Can also read our article on how to print with BotFeeder PLA

                        Materials Quality

                        Material Grade: NatureWorks 4032D
                        Filament Diameter: 1.75mm
                        Diameter Tolerance: +/- 0.03mm
                        Roundness Tolerance: +/- 0.05mm
                        Filament Weight: 1kg (700g for metallic & silky pearl)
                        Spool Length x Width: 190mm x 85mm
                        Spool Hole Diameter: 38mm
                        Spool Weight: 500g

                        BotFeeder PLA Black Filament Dimension


                        BotFeeder Original PLA is Made to Perfection.


                        Raw Material

                        The premium PLA grade is selected based on providing the safest printing experience. All virgin PLA pellets are supplied by NatureWorks LLC, a globally well-known company manufactures Ingeo brand polylactic acid (PLA).


                        Natural Color Pigment

                        All color pigments are extracted from nature. NOT chemical engineered pigment.  During the process of 3D printing, you'll noticed a pleasant sweet scent in the air.


                        Filtration Treatment

                        Before production, all PLA pellets and color pigments undergo a filtration process to remove any larger particles that might clogged the nozzle during printing.


                        Anti-Moist Treatment

                        All raw materials have undergone dying treatment before production, as the practice of which prevents 'bubbles' occurrence during extrusion due to moisture content within the raw materials.


                        Coloring Masterbatch

                        Identical colors from spool to spool.


                        Diameter Control

                        An important machine in our production are the laser measurement systems used to check the diameter of our filament real time during production. It’s measured over 1000 times per second and helps us guarantee that each spool of BotFeeder 3d printing filament produced within tolerance. We can guarantee 0.03mm +/- on both 2.90mm and 1.75mm BotFeeder 3D Printer Filament, which means you can rest assured that your printer is extruding the exact amount of material.


                        Enhanced Spool Holder

                        In combination with a specially design spool and stronger material the BotFeeder spool is able to withstand the impact from dropping on the floor. From an in-house test, a typical 1kg spool of filament did not break/snap after 12 drops.


                        Vacuum Sealed Packaging

                        Within minutes of production a spool of BotFeeder 3d printing filament is wrapped with a protective film and then sealed airtight with a double barrier foil. To ensure minimal moisture, we upgraded to a large pack of desiccant.  To go the extra mile, we’ll also seal the fancy cardboard box that we use to ship our product. You can make sure BotFeeder 3d printing filament is fresh and ready for 3d printing when you’re done unboxing.


                        BotFeeder Filament Packaging


                        In-House Production

                        All BotFeeder 3D Printer Filaments are produced in our own production facility, situated in the Taiwan. Since no external parties are involved in the making of BotFeeder filament we can ensure consistent quality on every order.


                        In-House Testing

                        The BotFeeder Testlab features a wide range of popular 3D printers. We’re continuously testing on our 3D printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community. If your not sure how to print with our materials on your 3D printer, please contact us at support@botfeeder.ca


                        The following printers are used in our lab

                        • Ultimaker Original
                        • Ultimaker 2
                        • Makerbot Replicator 2X
                        • Lulzbot Mini
                        • Original Pursa I3
                        • Creality CR-10
                        • Solidoodle 3
                        • UFO Standard (Delta & E3D hot-end)
                        • Rapidbot 2

                        Companies who are interested in having their 3D printer(s) featured in our testlab can contact us at support@botfeeder.ca


                        Care

                        Storing Your Filament

                        Please note that improper storage may damage your filament. To maintain its original quality, it's strongly recommended that the filament be stored in the following conditions:

                        • A dehumidifier cabinet or a dry and circulated area
                        • Room temperature
                        • Avoid direct sunlight or heat source

                        Selecting A Printer Location

                        Please note poor printer location will have a negative effect on your print result and possible of damaging your filament. To select the most ideal location for your printer, please follow this guide.

                        • Consistent temperature
                        • Stable air flow
                        • Away from furniture for safety

                        Avoid Tangling Your Filament

                        When unpacking, changing filament or unloading, It is strongly suggested to get a good grip at the end of the filament at all times in order to prevent tangling. The spool holder is specifically designed with 2 holes of each side, allowing you to secure the end of the filament by threading into it. or you can simply 3D print a "Filament clip" that is attached to the spool holder itself.


                        BotFeeder PLA Colour Code & Filament Tracker


                        If Filament Gets Damp

                        Dry it slowly in room temperature. Please note that heat drying the filament will damages its quality by making it become brittle. The preferred method of drying your filament is to put in a dehumidifier cabinet or in an airtight bag with a few packs of desiccants. It's recommended to maintain a humidity level of 25% or less.

                        Certifications

                        To take an extra step for your safety, BotFeeder 3D Printer Filaments are being tested on an annually basis by SGS. On top of that, all our filaments are manufactured in compliance of RoHS (Restriction of Hazardous Substances).  Why is it important?  It basically means the filaments are free from lead and other potentially hazardous substances including cadmium, mercury and chromium VI, among others.


                        SGS Certification


                        Material Science

                        BotFeeder was founded as a brand of Liing Shian Colorant Manufacturer which have been active in the masterbatch, and pigment & chemical auxiliaries for the plastics processing industry. Our knowhow, network and partnerships is driving material innovations and quality. You can expect BotFeeder to keep on developing interesting new materials, which will be tested on a variety of printers to make sure it’ll get the job done.

                          Sold Out
                          BotFeeder Filaglow Glow in the Dark Filament

                          BotFeeder Filaglow Glow in the Dark Filament

                          Emits an Ultra Green-Glow in the Dark
                          Kids Friendly
                          Minimized VOC Emissions
                          0 Toxic Additive Added
                          ~100% PLA
                          Compatible with most 3D printers on the market


                          Health Check

                          If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                          • Eye, nose and throat irritation
                          • Headache, loss of concentration and nausea
                          • Allergic skin reaction
                          • Dizziness
                            Temp. & Tips

                            At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                            Our Setting Profile

                            3D printer type: delta
                            Nozzle size: 0.30 mm
                            Resolution: 0.10 mm
                            Extrusion temperature: 205 C
                            Print bed temperature: 70 C
                            Print speed: 65 mm/sec (default speed)
                            Adhesion type: brim
                            Retraction distance: 4.5 mm
                            Retraction speed: 100 mm/sec
                            Prime: no
                            Support infill: 15%
                            Support pattern: zig zag
                            Support angle: 50 degree
                            Dense support layer: 2
                            Dense Infill: 60%
                            Upper separation layer: 1 to 2 (or 0.20 mm)
                            Lower separation layer: 1 to 2 (or 0.20 mm)


                            Printing Notes

                            1. Extrusion Temperature: 205 to 225C
                            2. Print Bed Temperature: 70 to 80C (optional)
                            3. Filaglow is Original PLA based material.
                            4. It is an abrasive material, please clean nozzle after usage.
                            5. Prints around 5 degree more than PLA.
                            6. Let print bed cool down to room temperature before removing your print.
                            7. Works great on glass platform, PEI, blue tape, buildtak, and kapton tape.
                            8. Adhesion solution: hair spray, ABS juice, and glue stick.
                            9. Can be printed without heated print bed.
                            10. If wrapping occurs, print using raft.
                            11. First layer usually 5 to 10 C higher than subsequent layers.
                            12. First layer usually print at 35mm/sec or slower.
                            13. PLA absorbs heat and so benefits from additional active cooling.
                            14. PLA adsorbs moisture.  Un-used spool should store in container or plastic bag.
                            15. Use sandpaper to smooth out the print.
                            16. Can be painted with acrylic without post processing.

                            Materials Quality

                            Material Grade: NatureWorks 4032D
                            Filament Diameter: 1.75mm
                            Diameter Tolerance: +/- 0.03mm
                            Roundness Tolerance: +/- 0.05mm
                            Filament Weight: 700g
                            Spool Length x Width: 190mm x 85mm
                            Spool Hole Diameter: 38mm
                            Spool Weight: 500g

                            BotFeeder PLA Black Filament Dimension


                            BotFeeder Original PLA is Made to Perfection.


                            Raw Material

                            The premium PLA grade is selected based on providing the safest printing experience. All virgin PLA pellets are supplied by NatureWorks LLC, a globally well-known company manufactures Ingeo brand polylactic acid (PLA).


                            Natural Color Pigment

                            All color pigments are extracted from nature. NOT chemical engineered pigment.  During the process of 3D printing, you'll noticed a pleasant sweet scent in the air.


                            Filtration Treatment

                            Before production, all PLA pellets and color pigments undergo a filtration process to remove any larger particles that might clogged the nozzle during printing.


                            Anti-Moist Treatment

                            All raw materials have undergone dying treatment before production, as the practice of which prevents 'bubbles' occurrence during extrusion due to moisture content within the raw materials.


                            Coloring Masterbatch

                            Identical colors from spool to spool.


                            Diameter Control

                            An important machine in our production are the laser measurement systems used to check the diameter of our filament real time during production. It’s measured over 1000 times per second and helps us guarantee that each spool of BotFeeder 3d printing filament produced within tolerance. We can guarantee 0.03mm +/- on both 2.90mm and 1.75mm BotFeeder 3D Printer Filament, which means you can rest assured that your printer is extruding the exact amount of material.


                            Enhanced Spool Holder

                            In combination with a specially design spool and stronger material the BotFeeder spool is able to withstand the impact from dropping on the floor. From an in-house test, a typical 1kg spool of filament did not break/snap after 12 drops.


                            Vacuum Sealed Packaging

                            Within minutes of production a spool of BotFeeder 3d printing filament is wrapped with a protective film and then sealed airtight with a double barrier foil. To ensure minimal moisture, we upgraded to a large pack of desiccant.  To go the extra mile, we’ll also seal the fancy cardboard box that we use to ship our product. You can make sure BotFeeder 3d printing filament is fresh and ready for 3d printing when you’re done unboxing.


                            BotFeeder Filament Packaging


                            In-House Production

                            All BotFeeder 3D Printer Filaments are produced in our own production facility, situated in the Taiwan. Since no external parties are involved in the making of BotFeeder filament we can ensure consistent quality on every order.


                            In-House Testing

                            The BotFeeder Testlab features a wide range of popular 3D printers. We’re continuously testing on our 3D printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community. If your not sure how to print with our materials on your 3D printer, please contact us at support@botfeeder.ca


                            The following printers are used in our lab

                            • Ultimaker Original
                            • Ultimaker 2
                            • Makerbot Replicator 2X
                            • Lulzbot Mini
                            • Original Pursa I3
                            • Creality CR-10
                            • Solidoodle 3
                            • UFO Standard (Delta & E3D hot-end)
                            • Rapidbot 2

                            Companies who are interested in having their 3D printer(s) featured in our testlab can contact us at support@botfeeder.ca


                            Care

                            Storing Your Filament

                            Please note that improper storage may damage your filament. To maintain its original quality, it's strongly recommended that the filament be stored in the following conditions:

                            • A dehumidifier cabinet or a dry and circulated area
                            • Room temperature
                            • Avoid direct sunlight or heat source

                            Selecting A Printer Location

                            Please note poor printer location will have a negative effect on your print result and possible of damaging your filament. To select the most ideal location for your printer, please follow this guide.

                            • Consistent temperature
                            • Stable air flow
                            • Away from furniture for safety

                            Avoid Tangling Your Filament

                            When unpacking, changing filament or unloading, It is strongly suggested to get a good grip at the end of the filament at all times in order to prevent tangling. The spool holder is specifically designed with 2 holes of each side, allowing you to secure the end of the filament by threading into it. or you can simply 3D print a "Filament clip" that is attached to the spool holder itself.


                            BotFeeder PLA Colour Code & Filament Tracker


                            If Filament Gets Damp

                            Dry it slowly in room temperature. Please note that heat drying the filament will damages its quality by making it become brittle. The preferred method of drying your filament is to put in a dehumidifier cabinet or in an airtight bag with a few packs of desiccants. It's recommended to maintain a humidity level of 25% or less.

                            Certifications

                            To take an extra step for your safety, BotFeeder 3D Printer Filaments are being tested on an annually basis by SGS. On top of that, all our filaments are manufactured in compliance of RoHS (Restriction of Hazardous Substances).  Why is it important?  It basically means the filaments are free from lead and other potentially hazardous substances including cadmium, mercury and chromium VI, among others.


                            SGS Certification


                            Material Science

                            BotFeeder was founded as a brand of Liing Shian Colorant Manufacturer which have been active in the masterbatch, and pigment & chemical auxiliaries for the plastics processing industry. Our knowhow, network and partnerships is driving material innovations and quality. You can expect BotFeeder to keep on developing interesting new materials, which will be tested on a variety of printers to make sure it’ll get the job done.

                              $35.00 CAD

                              BotFeeder Original PLA Filament

                              Kids Friendly
                              Minimized VOC Emissions
                              0 Toxic Additive Added
                              ~100% PLA
                              Compatible with most 3D printers on the market


                              Health Check

                              If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                              • Eye, nose and throat irritation
                              • Headache, loss of concentration and nausea
                              • Allergic skin reaction
                              • Dizziness
                                Temp. & Tips

                                At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                Our Setting Profile

                                3D printer type: delta
                                Nozzle size: 0.30 mm
                                Resolution: 0.10 mm
                                Extrusion temperature: 200 C
                                Print bed temperature: 65 C
                                Print speed: 65 mm/sec (default speed)
                                Adhesion type: brim
                                Retraction distance: 4.5 mm
                                Retraction speed: 100 mm/sec
                                Prime: no
                                Support infill: 15%
                                Support pattern: zig zag
                                Support angle: 50 degree
                                Dense support layer: 2
                                Dense Infill: 60%
                                Upper separation layer: 1 to 2 (or 0.20 mm)
                                Lower separation layer: 1 to 2 (or 0.20 mm)


                                Printing Notes

                                1. Extrusion Temperature: 200 to 220C
                                2. Print Bed Temperature: 60 to 70C (optional)
                                3. If you are printing white at 200C, black will require ~5 degree more.
                                4. Metallic should be printing with black setting.
                                5. Transparent needs the less energy to extrude.
                                6. Retraction settings: 4.5 mm @ 100 mm/sec.
                                7. Let print bed cool down to room temperature before removing your print.
                                8. Works great on glass platform, PEI, blue tape, buildtak, and kapton tape.
                                9. Adhesion solution: hair spray, ABS juice, and glue stick.
                                10. Can be printed without heated print bed.
                                11. If wrapping occurs, print using raft.
                                12. First layer usually 5 to 10 C higher than subsequent layers.
                                13. First layer usually print at 35mm/sec or slower.
                                14. PLA absorbs heat and so benefits from additional active cooling.
                                15. PLA adsorbs moisture.  Un-used spool should store in container or plastic bag.
                                16. Use sandpaper to smooth out the print.
                                17. Can be painted with acrylic without post processing.
                                18. Can also read our article on how to print with BotFeeder PLA

                                Materials Quality

                                Material Grade: NatureWorks 4032D
                                Filament Diameter: 1.75mm
                                Diameter Tolerance: +/- 0.03mm
                                Roundness Tolerance: +/- 0.05mm
                                Filament Weight: 1kg (700g for metallic & silky pearl)
                                Spool Length x Width: 190mm x 85mm
                                Spool Hole Diameter: 38mm
                                Spool Weight: 500g

                                BotFeeder PLA Black Filament Dimension


                                BotFeeder Original PLA is Made to Perfection.


                                Raw Material

                                The premium PLA grade is selected based on providing the safest printing experience. All virgin PLA pellets are supplied by NatureWorks LLC, a globally well-known company manufactures Ingeo brand polylactic acid (PLA).


                                Natural Color Pigment

                                All color pigments are extracted from nature. NOT chemical engineered pigment.  During the process of 3D printing, you'll noticed a pleasant sweet scent in the air.


                                Filtration Treatment

                                Before production, all PLA pellets and color pigments undergo a filtration process to remove any larger particles that might clogged the nozzle during printing.


                                Anti-Moist Treatment

                                All raw materials have undergone dying treatment before production, as the practice of which prevents 'bubbles' occurrence during extrusion due to moisture content within the raw materials.


                                Coloring Masterbatch

                                Identical colors from spool to spool.


                                Diameter Control

                                An important machine in our production are the laser measurement systems used to check the diameter of our filament real time during production. It’s measured over 1000 times per second and helps us guarantee that each spool of BotFeeder 3d printing filament produced within tolerance. We can guarantee 0.03mm +/- on both 2.90mm and 1.75mm BotFeeder 3D Printer Filament, which means you can rest assured that your printer is extruding the exact amount of material.


                                Enhanced Spool Holder

                                In combination with a specially design spool and stronger material the BotFeeder spool is able to withstand the impact from dropping on the floor. From an in-house test, a typical 1kg spool of filament did not break/snap after 12 drops.


                                Vacuum Sealed Packaging

                                Within minutes of production a spool of BotFeeder 3d printing filament is wrapped with a protective film and then sealed airtight with a double barrier foil. To ensure minimal moisture, we upgraded to a large pack of desiccant.  To go the extra mile, we’ll also seal the fancy cardboard box that we use to ship our product. You can make sure BotFeeder 3d printing filament is fresh and ready for 3d printing when you’re done unboxing.


                                BotFeeder Filament Packaging


                                In-House Production

                                All BotFeeder 3D Printer Filaments are produced in our own production facility, situated in the Taiwan. Since no external parties are involved in the making of BotFeeder filament we can ensure consistent quality on every order.


                                In-House Testing

                                The BotFeeder Testlab features a wide range of popular 3D printers. We’re continuously testing on our 3D printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community. If your not sure how to print with our materials on your 3D printer, please contact us at support@botfeeder.ca


                                The following printers are used in our lab

                                • Ultimaker Original
                                • Ultimaker 2
                                • Makerbot Replicator 2X
                                • Lulzbot Mini
                                • Original Pursa I3
                                • Creality CR-10
                                • Solidoodle 3
                                • UFO Standard (Delta & E3D hot-end)
                                • Rapidbot 2

                                Companies who are interested in having their 3D printer(s) featured in our testlab can contact us at support@botfeeder.ca


                                Care

                                Storing Your Filament

                                Please note that improper storage may damage your filament. To maintain its original quality, it's strongly recommended that the filament be stored in the following conditions:

                                • A dehumidifier cabinet or a dry and circulated area
                                • Room temperature
                                • Avoid direct sunlight or heat source

                                Selecting A Printer Location

                                Please note poor printer location will have a negative effect on your print result and possible of damaging your filament. To select the most ideal location for your printer, please follow this guide.

                                • Consistent temperature
                                • Stable air flow
                                • Away from furniture for safety

                                Avoid Tangling Your Filament

                                When unpacking, changing filament or unloading, It is strongly suggested to get a good grip at the end of the filament at all times in order to prevent tangling. The spool holder is specifically designed with 2 holes of each side, allowing you to secure the end of the filament by threading into it. or you can simply 3D print a "Filament clip" that is attached to the spool holder itself.


                                BotFeeder PLA Colour Code & Filament Tracker


                                If Filament Gets Damp

                                Dry it slowly in room temperature. Please note that heat drying the filament will damages its quality by making it become brittle. The preferred method of drying your filament is to put in a dehumidifier cabinet or in an airtight bag with a few packs of desiccants. It's recommended to maintain a humidity level of 25% or less.

                                Certifications

                                To take an extra step for your safety, BotFeeder 3D Printer Filaments are being tested on an annually basis by SGS. On top of that, all our filaments are manufactured in compliance of RoHS (Restriction of Hazardous Substances).  Why is it important?  It basically means the filaments are free from lead and other potentially hazardous substances including cadmium, mercury and chromium VI, among others.


                                SGS Certification


                                Material Science

                                BotFeeder was founded as a brand of Liing Shian Colorant Manufacturer which have been active in the masterbatch, and pigment & chemical auxiliaries for the plastics processing industry. Our knowhow, network and partnerships is driving material innovations and quality. You can expect BotFeeder to keep on developing interesting new materials, which will be tested on a variety of printers to make sure it’ll get the job done.

                                  Sold Out
                                  Items 1 to 8 of 8 total
                                  Safe Minimized VOCs & UFPs that poses health risks during 3D printing.
                                  Ultra Precision Tight tolerance to ensure highest quality print achievement with no down time.
                                  Innovative Strive to continue developing world-class products.
                                  Vibrant Colours Over 50 attractive colours for all of your amazing creations.
                                  Need Help? Our filament specialist team is ready to answer your questions.
                                  Hot Items
                                  700g PLA Filament 1.75mm – Silky Pearl White
                                  700g PLA Filament 1.75mm – Metallic Copper
                                  1kg PLA Filament 1.75mm – Light Tan (Skin)
                                  1kg ABS Filament 1.75mm – Gray
                                  1kg PLA Filament 1.75mm – Caramel