Products

.
1kg PLA Filament 1.75mm – White

Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.


  • Kids-friendly; low VOC
  • Easy to use
  • More brittle than ABS
  • Smooth with sandpaper
  • Paints with acrylic
  • Compatible with most desktop 3D printers
  • Certified by SGS
  • Backed by our 60 days warranty

If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


Health Check

If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

  • Eye, nose and throat irritation
  • Headache, loss of concentration and nausea
  • Allergic skin reaction
  • Dizziness
    SETTINGS

    At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


    Our Recommendation Settings

    Extrusion temperature: 200 to 220 C
    Print bed temperature: 66 to 70 C (optional)
    Print speed: 30 to 90 mm/sec
    Layer thickness: 0.05 to 0.40 mm


    Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?


    DELIVERY

    > View our full list of delivery rates to the USA and Canada.


    We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


    For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


    For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


    60 DAYS WARRANTY

    BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


    > View more information

      $24.99 CAD
      700g PLA Filament 1.75mm – Metallic Karat Gold

      Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.


      • Kids-friendly; low VOC
      • Easy to use
      • More brittle than ABS
      • Smooth with sandpaper
      • Paints with acrylic
      • Compatible with most desktop 3D printers
      • Certified by SGS
      • Backed by our 60 days warranty

      If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


      Health Check

      If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

      • Eye, nose and throat irritation
      • Headache, loss of concentration and nausea
      • Allergic skin reaction
      • Dizziness
        SETTINGS

        At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


        Our Recommendation Settings

        Extrusion temperature: 200 to 220 C
        Print bed temperature: 66 to 70 C (optional)
        Print speed: 30 to 90 mm/sec
        Layer thickness: 0.05 to 0.40 mm


        Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?


        DELIVERY

        > View our full list of delivery rates to the USA and Canada.


        We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


        For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


        For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


        60 DAYS WARRANTY

        BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


        > View more information

          $24.99 CAD
          1kg PLA Filament 1.75mm – Black

          Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.


          • Kids-friendly; low VOC
          • Easy to use
          • More brittle than ABS
          • Smooth with sandpaper
          • Paints with acrylic
          • Compatible with most desktop 3D printers
          • Certified by SGS
          • Backed by our 60 days warranty

          If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


          Health Check

          If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

          • Eye, nose and throat irritation
          • Headache, loss of concentration and nausea
          • Allergic skin reaction
          • Dizziness
            SETTINGS

            At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


            Our Recommendation Settings

            Extrusion temperature: 200 to 220 C
            Print bed temperature: 66 to 70 C (optional)
            Print speed: 30 to 90 mm/sec
            Layer thickness: 0.05 to 0.40 mm


            Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?


            DELIVERY

            > View our full list of delivery rates to the USA and Canada.


            We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


            For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


            For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


            60 DAYS WARRANTY

            BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


            > View more information

              $24.99 CAD
              1kg PLA Filament 1.75mm – Transparent Red

              Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.


              • Kids-friendly; low VOC
              • Easy to use
              • More brittle than ABS
              • Smooth with sandpaper
              • Paints with acrylic
              • Compatible with most desktop 3D printers
              • Certified by SGS
              • Backed by our 60 days warranty

              If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


              Health Check

              If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

              • Eye, nose and throat irritation
              • Headache, loss of concentration and nausea
              • Allergic skin reaction
              • Dizziness
                SETTINGS

                At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                Our Recommendation Settings

                Extrusion temperature: 200 to 220 C
                Print bed temperature: 66 to 70 C (optional)
                Print speed: 30 to 90 mm/sec
                Layer thickness: 0.05 to 0.40 mm


                Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?


                DELIVERY

                > View our full list of delivery rates to the USA and Canada.


                We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                60 DAYS WARRANTY

                BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                > View more information

                  $24.99 CAD
                  1kg PLA Filament 1.75mm – Blue

                  Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.


                  • Kids-friendly; low VOC
                  • Easy to use
                  • More brittle than ABS
                  • Smooth with sandpaper
                  • Paints with acrylic
                  • Compatible with most desktop 3D printers
                  • Certified by SGS
                  • Backed by our 60 days warranty

                  If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                  Health Check

                  If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                  • Eye, nose and throat irritation
                  • Headache, loss of concentration and nausea
                  • Allergic skin reaction
                  • Dizziness
                    SETTINGS

                    At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                    Our Recommendation Settings

                    Extrusion temperature: 200 to 220 C
                    Print bed temperature: 66 to 70 C (optional)
                    Print speed: 30 to 90 mm/sec
                    Layer thickness: 0.05 to 0.40 mm


                    Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?


                    DELIVERY

                    > View our full list of delivery rates to the USA and Canada.


                    We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                    For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                    For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                    60 DAYS WARRANTY

                    BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                    > View more information

                      $24.99 CAD
                      700g PLA Filament 1.75mm – Metallic Copper

                      Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.


                      • Kids-friendly; low VOC
                      • Easy to use
                      • More brittle than ABS
                      • Smooth with sandpaper
                      • Paints with acrylic
                      • Compatible with most desktop 3D printers
                      • Certified by SGS
                      • Backed by our 60 days warranty

                      If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                      Health Check

                      If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                      • Eye, nose and throat irritation
                      • Headache, loss of concentration and nausea
                      • Allergic skin reaction
                      • Dizziness
                        SETTINGS

                        At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                        Our Recommendation Settings

                        Extrusion temperature: 200 to 220 C
                        Print bed temperature: 66 to 70 C (optional)
                        Print speed: 30 to 90 mm/sec
                        Layer thickness: 0.05 to 0.40 mm


                        Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?


                        DELIVERY

                        > View our full list of delivery rates to the USA and Canada.


                        We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                        For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                        For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                        60 DAYS WARRANTY

                        BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                        > View more information

                          $24.99 CAD
                          700g PLA Filament 1.75mm – Silky Pearl White

                          Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.


                          • Kids-friendly; low VOC
                          • Easy to use
                          • More brittle than ABS
                          • Smooth with sandpaper
                          • Paints with acrylic
                          • Compatible with most desktop 3D printers
                          • Certified by SGS
                          • Backed by our 60 days warranty

                          If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                          Health Check

                          If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                          • Eye, nose and throat irritation
                          • Headache, loss of concentration and nausea
                          • Allergic skin reaction
                          • Dizziness
                            SETTINGS

                            At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                            Our Recommendation Settings

                            Extrusion temperature: 200 to 220 C
                            Print bed temperature: 66 to 70 C (optional)
                            Print speed: 30 to 90 mm/sec
                            Layer thickness: 0.05 to 0.40 mm


                            Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?


                            DELIVERY

                            > View our full list of delivery rates to the USA and Canada.


                            We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                            For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                            For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                            60 DAYS WARRANTY

                            BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                            > View more information

                              $24.99 CAD
                              1kg PLA Filament 1.75mm – Light Tan (Skin)

                              Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.


                              • Kids-friendly; low VOC
                              • Easy to use
                              • More brittle than ABS
                              • Smooth with sandpaper
                              • Paints with acrylic
                              • Compatible with most desktop 3D printers
                              • Certified by SGS
                              • Backed by our 60 days warranty

                              If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                              Health Check

                              If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                              • Eye, nose and throat irritation
                              • Headache, loss of concentration and nausea
                              • Allergic skin reaction
                              • Dizziness
                                SETTINGS

                                At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                Our Recommendation Settings

                                Extrusion temperature: 200 to 220 C
                                Print bed temperature: 66 to 70 C (optional)
                                Print speed: 30 to 90 mm/sec
                                Layer thickness: 0.05 to 0.40 mm


                                Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?


                                DELIVERY

                                > View our full list of delivery rates to the USA and Canada.


                                We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                                For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                                For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                                60 DAYS WARRANTY

                                BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                                > View more information

                                  $24.99 CAD
                                  1kg PLA Filament 1.75mm – Caramel

                                  Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.


                                  • Kids-friendly; low VOC
                                  • Easy to use
                                  • More brittle than ABS
                                  • Smooth with sandpaper
                                  • Paints with acrylic
                                  • Compatible with most desktop 3D printers
                                  • Certified by SGS
                                  • Backed by our 60 days warranty

                                  If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                                  Health Check

                                  If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                                  • Eye, nose and throat irritation
                                  • Headache, loss of concentration and nausea
                                  • Allergic skin reaction
                                  • Dizziness
                                    SETTINGS

                                    At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                    Our Recommendation Settings

                                    Extrusion temperature: 200 to 220 C
                                    Print bed temperature: 66 to 70 C (optional)
                                    Print speed: 30 to 90 mm/sec
                                    Layer thickness: 0.05 to 0.40 mm


                                    Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?


                                    DELIVERY

                                    > View our full list of delivery rates to the USA and Canada.


                                    We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                                    For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                                    For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                                    60 DAYS WARRANTY

                                    BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                                    > View more information

                                      $24.99 CAD
                                      1kg PLA Filament 1.75mm – Apple Green

                                      Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.


                                      • Kids-friendly; low VOC
                                      • Easy to use
                                      • More brittle than ABS
                                      • Smooth with sandpaper
                                      • Paints with acrylic
                                      • Compatible with most desktop 3D printers
                                      • Certified by SGS
                                      • Backed by our 60 days warranty

                                      If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                                      Health Check

                                      If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                                      • Eye, nose and throat irritation
                                      • Headache, loss of concentration and nausea
                                      • Allergic skin reaction
                                      • Dizziness
                                        SETTINGS

                                        At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                        Our Recommendation Settings

                                        Extrusion temperature: 200 to 220 C
                                        Print bed temperature: 66 to 70 C (optional)
                                        Print speed: 30 to 90 mm/sec
                                        Layer thickness: 0.05 to 0.40 mm


                                        Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?


                                        DELIVERY

                                        > View our full list of delivery rates to the USA and Canada.


                                        We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                                        For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                                        For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                                        60 DAYS WARRANTY

                                        BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                                        > View more information

                                          $24.99 CAD
                                          1kg PLA Filament 1.75mm – Red

                                          Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.


                                          • Kids-friendly; low VOC
                                          • Easy to use
                                          • More brittle than ABS
                                          • Smooth with sandpaper
                                          • Paints with acrylic
                                          • Compatible with most desktop 3D printers
                                          • Certified by SGS
                                          • Backed by our 60 days warranty

                                          If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                                          Health Check

                                          If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                                          • Eye, nose and throat irritation
                                          • Headache, loss of concentration and nausea
                                          • Allergic skin reaction
                                          • Dizziness
                                            SETTINGS

                                            At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                            Our Recommendation Settings

                                            Extrusion temperature: 200 to 220 C
                                            Print bed temperature: 66 to 70 C (optional)
                                            Print speed: 30 to 90 mm/sec
                                            Layer thickness: 0.05 to 0.40 mm


                                            Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?


                                            DELIVERY

                                            > View our full list of delivery rates to the USA and Canada.


                                            We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                                            For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                                            For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                                            60 DAYS WARRANTY

                                            BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                                            > View more information

                                              $24.99 CAD
                                              1kg PLA Filament 1.75mm – Transparent Green

                                              Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.


                                              • Kids-friendly; low VOC
                                              • Easy to use
                                              • More brittle than ABS
                                              • Smooth with sandpaper
                                              • Paints with acrylic
                                              • Compatible with most desktop 3D printers
                                              • Certified by SGS
                                              • Backed by our 60 days warranty

                                              If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                                              Health Check

                                              If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                                              • Eye, nose and throat irritation
                                              • Headache, loss of concentration and nausea
                                              • Allergic skin reaction
                                              • Dizziness
                                                SETTINGS

                                                At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                                Our Recommendation Settings

                                                Extrusion temperature: 200 to 220 C
                                                Print bed temperature: 66 to 70 C (optional)
                                                Print speed: 30 to 90 mm/sec
                                                Layer thickness: 0.05 to 0.40 mm


                                                Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?


                                                DELIVERY

                                                > View our full list of delivery rates to the USA and Canada.


                                                We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                                                For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                                                For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                                                60 DAYS WARRANTY

                                                BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                                                > View more information

                                                  $24.99 CAD
                                                  700g PLA Filament 1.75mm – Metallic Gold

                                                  Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.


                                                  • Kids-friendly; low VOC
                                                  • Easy to use
                                                  • More brittle than ABS
                                                  • Smooth with sandpaper
                                                  • Paints with acrylic
                                                  • Compatible with most desktop 3D printers
                                                  • Certified by SGS
                                                  • Backed by our 60 days warranty

                                                  If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                                                  Health Check

                                                  If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                                                  • Eye, nose and throat irritation
                                                  • Headache, loss of concentration and nausea
                                                  • Allergic skin reaction
                                                  • Dizziness
                                                    SETTINGS

                                                    At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                                    Our Recommendation Settings

                                                    Extrusion temperature: 200 to 220 C
                                                    Print bed temperature: 66 to 70 C (optional)
                                                    Print speed: 30 to 90 mm/sec
                                                    Layer thickness: 0.05 to 0.40 mm


                                                    Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?


                                                    DELIVERY

                                                    > View our full list of delivery rates to the USA and Canada.


                                                    We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                                                    For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                                                    For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                                                    60 DAYS WARRANTY

                                                    BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                                                    > View more information

                                                      $24.99 CAD
                                                      1kg PLA Filament 1.75mm – Yellow

                                                      Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.


                                                      • Kids-friendly; low VOC
                                                      • Easy to use
                                                      • More brittle than ABS
                                                      • Smooth with sandpaper
                                                      • Paints with acrylic
                                                      • Compatible with most desktop 3D printers
                                                      • Certified by SGS
                                                      • Backed by our 60 days warranty

                                                      If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                                                      Health Check

                                                      If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                                                      • Eye, nose and throat irritation
                                                      • Headache, loss of concentration and nausea
                                                      • Allergic skin reaction
                                                      • Dizziness
                                                        SETTINGS

                                                        At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                                        Our Recommendation Settings

                                                        Extrusion temperature: 200 to 220 C
                                                        Print bed temperature: 66 to 70 C (optional)
                                                        Print speed: 30 to 90 mm/sec
                                                        Layer thickness: 0.05 to 0.40 mm


                                                        Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?


                                                        DELIVERY

                                                        > View our full list of delivery rates to the USA and Canada.


                                                        We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                                                        For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                                                        For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                                                        60 DAYS WARRANTY

                                                        BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                                                        > View more information

                                                          $24.99 CAD
                                                          1kg PLA Filament 1.75mm – Macaron Pink

                                                          Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.


                                                          • Kids-friendly; low VOC
                                                          • Easy to use
                                                          • More brittle than ABS
                                                          • Smooth with sandpaper
                                                          • Paints with acrylic
                                                          • Compatible with most desktop 3D printers
                                                          • Certified by SGS
                                                          • Backed by our 60 days warranty

                                                          If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                                                          Health Check

                                                          If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                                                          • Eye, nose and throat irritation
                                                          • Headache, loss of concentration and nausea
                                                          • Allergic skin reaction
                                                          • Dizziness
                                                            SETTINGS

                                                            At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                                            Our Recommendation Settings

                                                            Extrusion temperature: 200 to 220 C
                                                            Print bed temperature: 66 to 70 C (optional)
                                                            Print speed: 30 to 90 mm/sec
                                                            Layer thickness: 0.05 to 0.40 mm


                                                            Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?


                                                            DELIVERY

                                                            > View our full list of delivery rates to the USA and Canada.


                                                            We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                                                            For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                                                            For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                                                            60 DAYS WARRANTY

                                                            BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                                                            > View more information

                                                              $24.99 CAD
                                                              700g PLA Filament 1.75mm – Silky Pearl Green

                                                              Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.


                                                              • Kids-friendly; low VOC
                                                              • Easy to use
                                                              • More brittle than ABS
                                                              • Smooth with sandpaper
                                                              • Paints with acrylic
                                                              • Compatible with most desktop 3D printers
                                                              • Certified by SGS
                                                              • Backed by our 60 days warranty

                                                              If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                                                              Health Check

                                                              If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                                                              • Eye, nose and throat irritation
                                                              • Headache, loss of concentration and nausea
                                                              • Allergic skin reaction
                                                              • Dizziness
                                                                SETTINGS

                                                                At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                                                Our Recommendation Settings

                                                                Extrusion temperature: 200 to 220 C
                                                                Print bed temperature: 66 to 70 C (optional)
                                                                Print speed: 30 to 90 mm/sec
                                                                Layer thickness: 0.05 to 0.40 mm


                                                                Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?


                                                                DELIVERY

                                                                > View our full list of delivery rates to the USA and Canada.


                                                                We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                                                                For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                                                                For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                                                                60 DAYS WARRANTY

                                                                BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                                                                > View more information

                                                                  $24.99 CAD
                                                                  1kg PLA Filament 1.75mm – Macaron Purple

                                                                  Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.


                                                                  • Kids-friendly; low VOC
                                                                  • Easy to use
                                                                  • More brittle than ABS
                                                                  • Smooth with sandpaper
                                                                  • Paints with acrylic
                                                                  • Compatible with most desktop 3D printers
                                                                  • Certified by SGS
                                                                  • Backed by our 60 days warranty

                                                                  If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                                                                  Health Check

                                                                  If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                                                                  • Eye, nose and throat irritation
                                                                  • Headache, loss of concentration and nausea
                                                                  • Allergic skin reaction
                                                                  • Dizziness
                                                                    SETTINGS

                                                                    At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                                                    Our Recommendation Settings

                                                                    Extrusion temperature: 200 to 220 C
                                                                    Print bed temperature: 66 to 70 C (optional)
                                                                    Print speed: 30 to 90 mm/sec
                                                                    Layer thickness: 0.05 to 0.40 mm


                                                                    Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?


                                                                    DELIVERY

                                                                    > View our full list of delivery rates to the USA and Canada.


                                                                    We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                                                                    For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                                                                    For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                                                                    60 DAYS WARRANTY

                                                                    BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                                                                    > View more information

                                                                      $24.99 CAD
                                                                      1kg PLA Filament 1.75mm – Macaron Yellow

                                                                      Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.


                                                                      • Kids-friendly; low VOC
                                                                      • Easy to use
                                                                      • More brittle than ABS
                                                                      • Smooth with sandpaper
                                                                      • Paints with acrylic
                                                                      • Compatible with most desktop 3D printers
                                                                      • Certified by SGS
                                                                      • Backed by our 60 days warranty

                                                                      If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                                                                      Health Check

                                                                      If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                                                                      • Eye, nose and throat irritation
                                                                      • Headache, loss of concentration and nausea
                                                                      • Allergic skin reaction
                                                                      • Dizziness
                                                                        SETTINGS

                                                                        At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                                                        Our Recommendation Settings

                                                                        Extrusion temperature: 200 to 220 C
                                                                        Print bed temperature: 66 to 70 C (optional)
                                                                        Print speed: 30 to 90 mm/sec
                                                                        Layer thickness: 0.05 to 0.40 mm


                                                                        Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?


                                                                        DELIVERY

                                                                        > View our full list of delivery rates to the USA and Canada.


                                                                        We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                                                                        For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                                                                        For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                                                                        60 DAYS WARRANTY

                                                                        BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                                                                        > View more information

                                                                          $24.99 CAD
                                                                          1kg PLA Filament 1.75mm – Macaron Green

                                                                          Are you suffering from eye, nose and throat irritation or headache? You're overexpose to VOCs and could have serious damage to your health. Pure PLA is made for one purpose: safety. There's nothing more important than your healthy.


                                                                          • Kids-friendly; low VOC
                                                                          • Easy to use
                                                                          • More brittle than ABS
                                                                          • Smooth with sandpaper
                                                                          • Paints with acrylic
                                                                          • Compatible with most desktop 3D printers
                                                                          • Certified by SGS
                                                                          • Backed by our 60 days warranty

                                                                          If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                                                                          Health Check

                                                                          If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                                                                          • Eye, nose and throat irritation
                                                                          • Headache, loss of concentration and nausea
                                                                          • Allergic skin reaction
                                                                          • Dizziness
                                                                            SETTINGS

                                                                            At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                                                            Our Recommendation Settings

                                                                            Extrusion temperature: 200 to 220 C
                                                                            Print bed temperature: 66 to 70 C (optional)
                                                                            Print speed: 30 to 90 mm/sec
                                                                            Layer thickness: 0.05 to 0.40 mm


                                                                            Access our full printing setting profile, and tricks & tips on printing Pure PLA, check out: How to print with BotFeeder Pure PLA?


                                                                            DELIVERY

                                                                            > View our full list of delivery rates to the USA and Canada.


                                                                            We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.