Products

BotFeeder Original ABS Filament

Engineer Grade
Toughness
Durable
Impact Resistance
Heat Resistance
Weatherproof
Outdoor & Indoor
Compatible with most 3D printers on the market

Temp. & Tips

At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


This profile is optimized based on UFO 3D Printer. A good reference point of where to start.
3D printer type: delta
Nozzle size: 0.30 mm
Resolution: 0.10 mm
Extrusion temperature: 250 C
Print bed temperature: 110 C
Print speed: 65 mm/sec (default speed)
Adhesion type: brim
Retraction distance: 4.5 mm
Retraction speed: 100 mm/sec
Prime: no
Support infill: 15%
Support pattern: zig zag
Support angle: 50 degree
Dense support layer: 2
Dense Infill: 60%
Upper separation layer: 1 to 2 (or 0.20 mm)
Lower separation layer: 1 to 2 (or 0.20 mm)


Printing Notes

  1. Extrusion Temperature: 250 to 260C
  2. Print Bed Temperature: 110 to 120C
  3. If you are printing white at 250C, black will require ~5 degree more.
  4. Let print bed cool down to room temperature before removing your print.
  5. Must print with heated print bed.
  6. Works great on glass platform, PEI, blue tape, buildtak, and kapton tape.
  7. Adhesion solution: hair spray, ABS juice, and glue stick
  8. If wrapping occurs, print using raft.
  9. Enclosure improves print quality.
  10. First layer usually 5 to 10 C higher than subsequent layers.
  11. First layer usually print at 35mm/sec or slower.
  12. ABS absorbs heat and so benefits from additional active cooling.
  13. ABS adsorbs ~5% of moisture.  Un-used spool should store in container or plastic bag.
  14. Use Acetone to smooth out the print.
  15. Sand the print down with 300-grit sandpaper before acrylic painting.
  16. Longer life span compared to PLA.
  17. More flexible compared to PLA.
  18. Can also read article on how to print with BotFeeder ABS
Materials Quality

Material Grade: Chi Mei Polylac PA-747
Filament Diameter: 1.75mm or 2.90mm
Diameter Tolerance: +/- 0.03mm
Roundness Tolerance: +/- 0.05mm
Filament Weight: 1kg
Spool Length x Width: 190mm x 85mm
Spool Hole Diameter: 38mm
Spool Weight: 500g


BotFeeder Original ABS is Made to Perfection.


Raw Material

The premium ABS grade is selected based on providing engineering needs. All virgin ABS pellets are supplied by Chi Mei Corp. a globally well-known company manufactures polylac (ABS).


Natural Color Pigment

All color pigments are extracted from nature. NOT chemical engineered pigment.  During the process of 3D printing, you'll noticed a pleasant sweet scent in the air.


Filtration Treatment

Before production, all ABS pellets and color pigments undergo a filtration process to remove any larger particles that might clogged the nozzle during printing.


Anti-Moist Treatment

All raw materials have undergone dying treatment before production, as the practice of which prevents 'bubbles' occurrence during extrusion due to moisture content within the raw materials.


Coloring Masterbatch

Identical colors from spool to spool.


Diameter Control

An important machine in our production are the laser measurement systems used to check the diameter of our filament real time during production. It’s measured over 1000 times per second and helps us guarantee that each spool of BotFeeder 3d printing filament produced within tolerance. We can guarantee 0.03mm +/- on both 2.90mm and 1.75mm BotFeeder 3D Printer Filament, which means you can rest assured that your printer is extruding the exact amount of material.


Enhanced Spool Holder

In combination with a specially design spool and stronger material the BotFeeder spool is able to withstand the impact from dropping on the floor. From an in-house test, a typical 1kg spool of filament did not break/snap after 12 drops.


Vacuum Sealed Packaging

Within minutes of production a spool of BotFeeder 3d printing filament is wrapped with a protective film and then sealed airtight with a double barrier foil. To ensure minimal moisture, we upgraded to a large pack of desiccant.  To go the extra mile, we’ll also seal the fancy cardboard box that we use to ship our product. You can make sure BotFeeder 3d printing filament is fresh and ready for 3d printing when you’re done unboxing.


BotFeeder Filament Packaging


In-House Production

All BotFeeder 3D Printer Filaments are produced in our own production facility, situated in the Taiwan. Since no external parties are involved in the making of BotFeeder filament we can ensure consistent quality on every order.


In-House Testing

The BotFeeder Testlab features a wide range of popular 3D printers. We’re continuously testing on our 3D printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community. If your not sure how to print with our materials on your 3D printer, please contact us at support@botfeeder.ca


The following printers are used in our lab

  • Ultimaker Original
  • Ultimaker 2
  • Makerbot Replicator 2X
  • Lulzbot Mini
  • Original Pursa I3
  • Creality CR-10
  • Solidoodle 3
  • UFO Standard (Delta & E3D hot-end)
  • Rapidbot 2

Companies who are interested in having their 3D printer(s) featured in our testlab can contact us at support@botfeeder.ca


Care

Storing Your Filament

Please note that improper storage may damage your filament. To maintain its original quality, it's strongly recommended that the filament be stored in the following conditions:

  • A dehumidifier cabinet or a dry and circulated area
  • Room temperature
  • Avoid direct sunlight or heat source

Selecting A Printer Location

Please note poor printer location will have a negative effect on your print result and possible of damaging your filament. To select the most ideal location for your printer, please follow this guide.

  • Consistent temperature
  • Stable air flow
  • Away from furniture for safety

Avoid Tangling Your Filament

When unpacking, changing filament or unloading, It is strongly suggested to get a good grip at the end of the filament at all times in order to prevent tangling. The spool holder is specifically designed with 2 holes of each side, allowing you to secure the end of the filament by threading into it. or you can simply 3D print a "Filament clip" that is attached to the spool holder itself.


BotFeeder PLA Colour Code & Filament Tracker


If Filament Gets Damp

Dry it slowly in room temperature. Please note that heat drying the filament will damages its quality by making it become brittle. The preferred method of drying your filament is to put in a dehumidifier cabinet or in an airtight bag with a few packs of desiccants. It's recommended to maintain a humidity level of 25% or less.

Certifications

To take an extra step for your safety, BotFeeder 3D Printer Filaments are being tested on an annually basis by SGS. On top of that, all our filaments are manufactured in compliance of RoHS (Restriction of Hazardous Substances).  Why is it important?  It basically means the filaments are free from lead and other potentially hazardous substances including cadmium, mercury and chromium VI, among others.


SGS Certification


Material Science

BotFeeder was founded as a brand of Liing Shian Colorant Manufacturer which have been active in the masterbatch, and pigment & chemical auxiliaries for the plastics processing industry. Our knowhow, network and partnerships is driving material innovations and quality. You can expect BotFeeder to keep on developing interesting new materials, which will be tested on a variety of printers to make sure it’ll get the job done.

    Sold Out
    1kg ABS Filament 1.75mm – Blue

    BotFeeder Original ABS Filament

    Engineer Grade
    Toughness
    Durable
    Impact Resistance
    Heat Resistance
    Weatherproof
    Outdoor & Indoor
    Compatible with most 3D printers on the market

    Temp. & Tips

    At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


    This profile is optimized based on UFO 3D Printer. A good reference point of where to start.
    3D printer type: delta
    Nozzle size: 0.30 mm
    Resolution: 0.10 mm
    Extrusion temperature: 250 C
    Print bed temperature: 110 C
    Print speed: 65 mm/sec (default speed)
    Adhesion type: brim
    Retraction distance: 4.5 mm
    Retraction speed: 100 mm/sec
    Prime: no
    Support infill: 15%
    Support pattern: zig zag
    Support angle: 50 degree
    Dense support layer: 2
    Dense Infill: 60%
    Upper separation layer: 1 to 2 (or 0.20 mm)
    Lower separation layer: 1 to 2 (or 0.20 mm)


    Printing Notes

    1. Extrusion Temperature: 250 to 260C
    2. Print Bed Temperature: 110 to 120C
    3. If you are printing white at 250C, black will require ~5 degree more.
    4. Let print bed cool down to room temperature before removing your print.
    5. Must print with heated print bed.
    6. Works great on glass platform, PEI, blue tape, buildtak, and kapton tape.
    7. Adhesion solution: hair spray, ABS juice, and glue stick
    8. If wrapping occurs, print using raft.
    9. Enclosure improves print quality.
    10. First layer usually 5 to 10 C higher than subsequent layers.
    11. First layer usually print at 35mm/sec or slower.
    12. ABS absorbs heat and so benefits from additional active cooling.
    13. ABS adsorbs ~5% of moisture.  Un-used spool should store in container or plastic bag.
    14. Use Acetone to smooth out the print.
    15. Sand the print down with 300-grit sandpaper before acrylic painting.
    16. Longer life span compared to PLA.
    17. More flexible compared to PLA.
    18. Can also read article on how to print with BotFeeder ABS
    Materials Quality

    Material Grade: Chi Mei Polylac PA-747
    Filament Diameter: 1.75mm or 2.90mm
    Diameter Tolerance: +/- 0.03mm
    Roundness Tolerance: +/- 0.05mm
    Filament Weight: 1kg
    Spool Length x Width: 190mm x 85mm
    Spool Hole Diameter: 38mm
    Spool Weight: 500g


    BotFeeder Original ABS is Made to Perfection.


    Raw Material

    The premium ABS grade is selected based on providing engineering needs. All virgin ABS pellets are supplied by Chi Mei Corp. a globally well-known company manufactures polylac (ABS).


    Natural Color Pigment

    All color pigments are extracted from nature. NOT chemical engineered pigment.  During the process of 3D printing, you'll noticed a pleasant sweet scent in the air.


    Filtration Treatment

    Before production, all ABS pellets and color pigments undergo a filtration process to remove any larger particles that might clogged the nozzle during printing.


    Anti-Moist Treatment

    All raw materials have undergone dying treatment before production, as the practice of which prevents 'bubbles' occurrence during extrusion due to moisture content within the raw materials.


    Coloring Masterbatch

    Identical colors from spool to spool.


    Diameter Control

    An important machine in our production are the laser measurement systems used to check the diameter of our filament real time during production. It’s measured over 1000 times per second and helps us guarantee that each spool of BotFeeder 3d printing filament produced within tolerance. We can guarantee 0.03mm +/- on both 2.90mm and 1.75mm BotFeeder 3D Printer Filament, which means you can rest assured that your printer is extruding the exact amount of material.


    Enhanced Spool Holder

    In combination with a specially design spool and stronger material the BotFeeder spool is able to withstand the impact from dropping on the floor. From an in-house test, a typical 1kg spool of filament did not break/snap after 12 drops.


    Vacuum Sealed Packaging

    Within minutes of production a spool of BotFeeder 3d printing filament is wrapped with a protective film and then sealed airtight with a double barrier foil. To ensure minimal moisture, we upgraded to a large pack of desiccant.  To go the extra mile, we’ll also seal the fancy cardboard box that we use to ship our product. You can make sure BotFeeder 3d printing filament is fresh and ready for 3d printing when you’re done unboxing.


    BotFeeder Filament Packaging


    In-House Production

    All BotFeeder 3D Printer Filaments are produced in our own production facility, situated in the Taiwan. Since no external parties are involved in the making of BotFeeder filament we can ensure consistent quality on every order.


    In-House Testing

    The BotFeeder Testlab features a wide range of popular 3D printers. We’re continuously testing on our 3D printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community. If your not sure how to print with our materials on your 3D printer, please contact us at support@botfeeder.ca


    The following printers are used in our lab

    • Ultimaker Original
    • Ultimaker 2
    • Makerbot Replicator 2X
    • Lulzbot Mini
    • Original Pursa I3
    • Creality CR-10
    • Solidoodle 3
    • UFO Standard (Delta & E3D hot-end)
    • Rapidbot 2

    Companies who are interested in having their 3D printer(s) featured in our testlab can contact us at support@botfeeder.ca


    Care

    Storing Your Filament

    Please note that improper storage may damage your filament. To maintain its original quality, it's strongly recommended that the filament be stored in the following conditions:

    • A dehumidifier cabinet or a dry and circulated area
    • Room temperature
    • Avoid direct sunlight or heat source

    Selecting A Printer Location

    Please note poor printer location will have a negative effect on your print result and possible of damaging your filament. To select the most ideal location for your printer, please follow this guide.

    • Consistent temperature
    • Stable air flow
    • Away from furniture for safety

    Avoid Tangling Your Filament

    When unpacking, changing filament or unloading, It is strongly suggested to get a good grip at the end of the filament at all times in order to prevent tangling. The spool holder is specifically designed with 2 holes of each side, allowing you to secure the end of the filament by threading into it. or you can simply 3D print a "Filament clip" that is attached to the spool holder itself.


    BotFeeder PLA Colour Code & Filament Tracker


    If Filament Gets Damp

    Dry it slowly in room temperature. Please note that heat drying the filament will damages its quality by making it become brittle. The preferred method of drying your filament is to put in a dehumidifier cabinet or in an airtight bag with a few packs of desiccants. It's recommended to maintain a humidity level of 25% or less.

    Certifications

    To take an extra step for your safety, BotFeeder 3D Printer Filaments are being tested on an annually basis by SGS. On top of that, all our filaments are manufactured in compliance of RoHS (Restriction of Hazardous Substances).  Why is it important?  It basically means the filaments are free from lead and other potentially hazardous substances including cadmium, mercury and chromium VI, among others.


    SGS Certification


    Material Science

    BotFeeder was founded as a brand of Liing Shian Colorant Manufacturer which have been active in the masterbatch, and pigment & chemical auxiliaries for the plastics processing industry. Our knowhow, network and partnerships is driving material innovations and quality. You can expect BotFeeder to keep on developing interesting new materials, which will be tested on a variety of printers to make sure it’ll get the job done.

      $35.00 CAD

      BotFeeder Original ABS Filament

      Engineer Grade
      Toughness
      Durable
      Impact Resistance
      Heat Resistance
      Weatherproof
      Outdoor & Indoor
      Compatible with most 3D printers on the market

      Temp. & Tips

      At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


      This profile is optimized based on UFO 3D Printer. A good reference point of where to start.
      3D printer type: delta
      Nozzle size: 0.30 mm
      Resolution: 0.10 mm
      Extrusion temperature: 250 C
      Print bed temperature: 110 C
      Print speed: 65 mm/sec (default speed)
      Adhesion type: brim
      Retraction distance: 4.5 mm
      Retraction speed: 100 mm/sec
      Prime: no
      Support infill: 15%
      Support pattern: zig zag
      Support angle: 50 degree
      Dense support layer: 2
      Dense Infill: 60%
      Upper separation layer: 1 to 2 (or 0.20 mm)
      Lower separation layer: 1 to 2 (or 0.20 mm)


      Printing Notes

      1. Extrusion Temperature: 250 to 260C
      2. Print Bed Temperature: 110 to 120C
      3. If you are printing white at 250C, black will require ~5 degree more.
      4. Let print bed cool down to room temperature before removing your print.
      5. Must print with heated print bed.
      6. Works great on glass platform, PEI, blue tape, buildtak, and kapton tape.
      7. Adhesion solution: hair spray, ABS juice, and glue stick
      8. If wrapping occurs, print using raft.
      9. Enclosure improves print quality.
      10. First layer usually 5 to 10 C higher than subsequent layers.
      11. First layer usually print at 35mm/sec or slower.
      12. ABS absorbs heat and so benefits from additional active cooling.
      13. ABS adsorbs ~5% of moisture.  Un-used spool should store in container or plastic bag.
      14. Use Acetone to smooth out the print.
      15. Sand the print down with 300-grit sandpaper before acrylic painting.
      16. Longer life span compared to PLA.
      17. More flexible compared to PLA.
      18. Can also read article on how to print with BotFeeder ABS
      Materials Quality

      Material Grade: Chi Mei Polylac PA-747
      Filament Diameter: 1.75mm or 2.90mm
      Diameter Tolerance: +/- 0.03mm
      Roundness Tolerance: +/- 0.05mm
      Filament Weight: 1kg
      Spool Length x Width: 190mm x 85mm
      Spool Hole Diameter: 38mm
      Spool Weight: 500g


      BotFeeder Original ABS is Made to Perfection.


      Raw Material

      The premium ABS grade is selected based on providing engineering needs. All virgin ABS pellets are supplied by Chi Mei Corp. a globally well-known company manufactures polylac (ABS).


      Natural Color Pigment

      All color pigments are extracted from nature. NOT chemical engineered pigment.  During the process of 3D printing, you'll noticed a pleasant sweet scent in the air.


      Filtration Treatment

      Before production, all ABS pellets and color pigments undergo a filtration process to remove any larger particles that might clogged the nozzle during printing.


      Anti-Moist Treatment

      All raw materials have undergone dying treatment before production, as the practice of which prevents 'bubbles' occurrence during extrusion due to moisture content within the raw materials.


      Coloring Masterbatch

      Identical colors from spool to spool.


      Diameter Control

      An important machine in our production are the laser measurement systems used to check the diameter of our filament real time during production. It’s measured over 1000 times per second and helps us guarantee that each spool of BotFeeder 3d printing filament produced within tolerance. We can guarantee 0.03mm +/- on both 2.90mm and 1.75mm BotFeeder 3D Printer Filament, which means you can rest assured that your printer is extruding the exact amount of material.


      Enhanced Spool Holder

      In combination with a specially design spool and stronger material the BotFeeder spool is able to withstand the impact from dropping on the floor. From an in-house test, a typical 1kg spool of filament did not break/snap after 12 drops.


      Vacuum Sealed Packaging

      Within minutes of production a spool of BotFeeder 3d printing filament is wrapped with a protective film and then sealed airtight with a double barrier foil. To ensure minimal moisture, we upgraded to a large pack of desiccant.  To go the extra mile, we’ll also seal the fancy cardboard box that we use to ship our product. You can make sure BotFeeder 3d printing filament is fresh and ready for 3d printing when you’re done unboxing.


      BotFeeder Filament Packaging


      In-House Production

      All BotFeeder 3D Printer Filaments are produced in our own production facility, situated in the Taiwan. Since no external parties are involved in the making of BotFeeder filament we can ensure consistent quality on every order.


      In-House Testing

      The BotFeeder Testlab features a wide range of popular 3D printers. We’re continuously testing on our 3D printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community. If your not sure how to print with our materials on your 3D printer, please contact us at support@botfeeder.ca


      The following printers are used in our lab

      • Ultimaker Original
      • Ultimaker 2
      • Makerbot Replicator 2X
      • Lulzbot Mini
      • Original Pursa I3
      • Creality CR-10
      • Solidoodle 3
      • UFO Standard (Delta & E3D hot-end)
      • Rapidbot 2

      Companies who are interested in having their 3D printer(s) featured in our testlab can contact us at support@botfeeder.ca


      Care

      Storing Your Filament

      Please note that improper storage may damage your filament. To maintain its original quality, it's strongly recommended that the filament be stored in the following conditions:

      • A dehumidifier cabinet or a dry and circulated area
      • Room temperature
      • Avoid direct sunlight or heat source

      Selecting A Printer Location

      Please note poor printer location will have a negative effect on your print result and possible of damaging your filament. To select the most ideal location for your printer, please follow this guide.

      • Consistent temperature
      • Stable air flow
      • Away from furniture for safety

      Avoid Tangling Your Filament

      When unpacking, changing filament or unloading, It is strongly suggested to get a good grip at the end of the filament at all times in order to prevent tangling. The spool holder is specifically designed with 2 holes of each side, allowing you to secure the end of the filament by threading into it. or you can simply 3D print a "Filament clip" that is attached to the spool holder itself.


      BotFeeder PLA Colour Code & Filament Tracker


      If Filament Gets Damp

      Dry it slowly in room temperature. Please note that heat drying the filament will damages its quality by making it become brittle. The preferred method of drying your filament is to put in a dehumidifier cabinet or in an airtight bag with a few packs of desiccants. It's recommended to maintain a humidity level of 25% or less.

      Certifications

      To take an extra step for your safety, BotFeeder 3D Printer Filaments are being tested on an annually basis by SGS. On top of that, all our filaments are manufactured in compliance of RoHS (Restriction of Hazardous Substances).  Why is it important?  It basically means the filaments are free from lead and other potentially hazardous substances including cadmium, mercury and chromium VI, among others.


      SGS Certification


      Material Science

      BotFeeder was founded as a brand of Liing Shian Colorant Manufacturer which have been active in the masterbatch, and pigment & chemical auxiliaries for the plastics processing industry. Our knowhow, network and partnerships is driving material innovations and quality. You can expect BotFeeder to keep on developing interesting new materials, which will be tested on a variety of printers to make sure it’ll get the job done.

        Sold Out
        1kg ABS Filament 1.75mm – Fluorescent Orange

        BotFeeder Original ABS Filament

        Engineer Grade
        Toughness
        Durable
        Impact Resistance
        Heat Resistance
        Weatherproof
        Outdoor & Indoor
        Compatible with most 3D printers on the market

        Temp. & Tips

        At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


        This profile is optimized based on UFO 3D Printer. A good reference point of where to start.
        3D printer type: delta
        Nozzle size: 0.30 mm
        Resolution: 0.10 mm
        Extrusion temperature: 250 C
        Print bed temperature: 110 C
        Print speed: 65 mm/sec (default speed)
        Adhesion type: brim
        Retraction distance: 4.5 mm
        Retraction speed: 100 mm/sec
        Prime: no
        Support infill: 15%
        Support pattern: zig zag
        Support angle: 50 degree
        Dense support layer: 2
        Dense Infill: 60%
        Upper separation layer: 1 to 2 (or 0.20 mm)
        Lower separation layer: 1 to 2 (or 0.20 mm)


        Printing Notes

        1. Extrusion Temperature: 250 to 260C
        2. Print Bed Temperature: 110 to 120C
        3. If you are printing white at 250C, black will require ~5 degree more.
        4. Let print bed cool down to room temperature before removing your print.
        5. Must print with heated print bed.
        6. Works great on glass platform, PEI, blue tape, buildtak, and kapton tape.
        7. Adhesion solution: hair spray, ABS juice, and glue stick
        8. If wrapping occurs, print using raft.
        9. Enclosure improves print quality.
        10. First layer usually 5 to 10 C higher than subsequent layers.
        11. First layer usually print at 35mm/sec or slower.
        12. ABS absorbs heat and so benefits from additional active cooling.
        13. ABS adsorbs ~5% of moisture.  Un-used spool should store in container or plastic bag.
        14. Use Acetone to smooth out the print.
        15. Sand the print down with 300-grit sandpaper before acrylic painting.
        16. Longer life span compared to PLA.
        17. More flexible compared to PLA.
        18. Can also read article on how to print with BotFeeder ABS
        Materials Quality

        Material Grade: Chi Mei Polylac PA-747
        Filament Diameter: 1.75mm or 2.90mm
        Diameter Tolerance: +/- 0.03mm
        Roundness Tolerance: +/- 0.05mm
        Filament Weight: 1kg
        Spool Length x Width: 190mm x 85mm
        Spool Hole Diameter: 38mm
        Spool Weight: 500g


        BotFeeder Original ABS is Made to Perfection.


        Raw Material

        The premium ABS grade is selected based on providing engineering needs. All virgin ABS pellets are supplied by Chi Mei Corp. a globally well-known company manufactures polylac (ABS).


        Natural Color Pigment

        All color pigments are extracted from nature. NOT chemical engineered pigment.  During the process of 3D printing, you'll noticed a pleasant sweet scent in the air.


        Filtration Treatment

        Before production, all ABS pellets and color pigments undergo a filtration process to remove any larger particles that might clogged the nozzle during printing.


        Anti-Moist Treatment

        All raw materials have undergone dying treatment before production, as the practice of which prevents 'bubbles' occurrence during extrusion due to moisture content within the raw materials.


        Coloring Masterbatch

        Identical colors from spool to spool.


        Diameter Control

        An important machine in our production are the laser measurement systems used to check the diameter of our filament real time during production. It’s measured over 1000 times per second and helps us guarantee that each spool of BotFeeder 3d printing filament produced within tolerance. We can guarantee 0.03mm +/- on both 2.90mm and 1.75mm BotFeeder 3D Printer Filament, which means you can rest assured that your printer is extruding the exact amount of material.


        Enhanced Spool Holder

        In combination with a specially design spool and stronger material the BotFeeder spool is able to withstand the impact from dropping on the floor. From an in-house test, a typical 1kg spool of filament did not break/snap after 12 drops.


        Vacuum Sealed Packaging

        Within minutes of production a spool of BotFeeder 3d printing filament is wrapped with a protective film and then sealed airtight with a double barrier foil. To ensure minimal moisture, we upgraded to a large pack of desiccant.  To go the extra mile, we’ll also seal the fancy cardboard box that we use to ship our product. You can make sure BotFeeder 3d printing filament is fresh and ready for 3d printing when you’re done unboxing.


        BotFeeder Filament Packaging


        In-House Production

        All BotFeeder 3D Printer Filaments are produced in our own production facility, situated in the Taiwan. Since no external parties are involved in the making of BotFeeder filament we can ensure consistent quality on every order.


        In-House Testing

        The BotFeeder Testlab features a wide range of popular 3D printers. We’re continuously testing on our 3D printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community. If your not sure how to print with our materials on your 3D printer, please contact us at support@botfeeder.ca


        The following printers are used in our lab

        • Ultimaker Original
        • Ultimaker 2
        • Makerbot Replicator 2X
        • Lulzbot Mini
        • Original Pursa I3
        • Creality CR-10
        • Solidoodle 3
        • UFO Standard (Delta & E3D hot-end)
        • Rapidbot 2

        Companies who are interested in having their 3D printer(s) featured in our testlab can contact us at support@botfeeder.ca


        Care

        Storing Your Filament

        Please note that improper storage may damage your filament. To maintain its original quality, it's strongly recommended that the filament be stored in the following conditions:

        • A dehumidifier cabinet or a dry and circulated area
        • Room temperature
        • Avoid direct sunlight or heat source

        Selecting A Printer Location

        Please note poor printer location will have a negative effect on your print result and possible of damaging your filament. To select the most ideal location for your printer, please follow this guide.

        • Consistent temperature
        • Stable air flow
        • Away from furniture for safety

        Avoid Tangling Your Filament

        When unpacking, changing filament or unloading, It is strongly suggested to get a good grip at the end of the filament at all times in order to prevent tangling. The spool holder is specifically designed with 2 holes of each side, allowing you to secure the end of the filament by threading into it. or you can simply 3D print a "Filament clip" that is attached to the spool holder itself.


        BotFeeder PLA Colour Code & Filament Tracker


        If Filament Gets Damp

        Dry it slowly in room temperature. Please note that heat drying the filament will damages its quality by making it become brittle. The preferred method of drying your filament is to put in a dehumidifier cabinet or in an airtight bag with a few packs of desiccants. It's recommended to maintain a humidity level of 25% or less.

        Certifications

        To take an extra step for your safety, BotFeeder 3D Printer Filaments are being tested on an annually basis by SGS. On top of that, all our filaments are manufactured in compliance of RoHS (Restriction of Hazardous Substances).  Why is it important?  It basically means the filaments are free from lead and other potentially hazardous substances including cadmium, mercury and chromium VI, among others.


        SGS Certification


        Material Science

        BotFeeder was founded as a brand of Liing Shian Colorant Manufacturer which have been active in the masterbatch, and pigment & chemical auxiliaries for the plastics processing industry. Our knowhow, network and partnerships is driving material innovations and quality. You can expect BotFeeder to keep on developing interesting new materials, which will be tested on a variety of printers to make sure it’ll get the job done.

          $35.00 CAD
          1kg ABS Filament 1.75mm – Fluorescent Pink

          BotFeeder Original ABS Filament

          Engineer Grade
          Toughness
          Durable
          Impact Resistance
          Heat Resistance
          Weatherproof
          Outdoor & Indoor
          Compatible with most 3D printers on the market

          Temp. & Tips

          At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


          This profile is optimized based on UFO 3D Printer. A good reference point of where to start.
          3D printer type: delta
          Nozzle size: 0.30 mm
          Resolution: 0.10 mm
          Extrusion temperature: 250 C
          Print bed temperature: 110 C
          Print speed: 65 mm/sec (default speed)
          Adhesion type: brim
          Retraction distance: 4.5 mm
          Retraction speed: 100 mm/sec
          Prime: no
          Support infill: 15%
          Support pattern: zig zag
          Support angle: 50 degree
          Dense support layer: 2
          Dense Infill: 60%
          Upper separation layer: 1 to 2 (or 0.20 mm)
          Lower separation layer: 1 to 2 (or 0.20 mm)


          Printing Notes

          1. Extrusion Temperature: 250 to 260C
          2. Print Bed Temperature: 110 to 120C
          3. If you are printing white at 250C, black will require ~5 degree more.
          4. Let print bed cool down to room temperature before removing your print.
          5. Must print with heated print bed.
          6. Works great on glass platform, PEI, blue tape, buildtak, and kapton tape.
          7. Adhesion solution: hair spray, ABS juice, and glue stick
          8. If wrapping occurs, print using raft.
          9. Enclosure improves print quality.
          10. First layer usually 5 to 10 C higher than subsequent layers.
          11. First layer usually print at 35mm/sec or slower.
          12. ABS absorbs heat and so benefits from additional active cooling.
          13. ABS adsorbs ~5% of moisture.  Un-used spool should store in container or plastic bag.
          14. Use Acetone to smooth out the print.
          15. Sand the print down with 300-grit sandpaper before acrylic painting.
          16. Longer life span compared to PLA.
          17. More flexible compared to PLA.
          18. Can also read article on how to print with BotFeeder ABS
          Materials Quality

          Material Grade: Chi Mei Polylac PA-747
          Filament Diameter: 1.75mm or 2.90mm
          Diameter Tolerance: +/- 0.03mm
          Roundness Tolerance: +/- 0.05mm
          Filament Weight: 1kg
          Spool Length x Width: 190mm x 85mm
          Spool Hole Diameter: 38mm
          Spool Weight: 500g


          BotFeeder Original ABS is Made to Perfection.


          Raw Material

          The premium ABS grade is selected based on providing engineering needs. All virgin ABS pellets are supplied by Chi Mei Corp. a globally well-known company manufactures polylac (ABS).


          Natural Color Pigment

          All color pigments are extracted from nature. NOT chemical engineered pigment.  During the process of 3D printing, you'll noticed a pleasant sweet scent in the air.


          Filtration Treatment

          Before production, all ABS pellets and color pigments undergo a filtration process to remove any larger particles that might clogged the nozzle during printing.


          Anti-Moist Treatment

          All raw materials have undergone dying treatment before production, as the practice of which prevents 'bubbles' occurrence during extrusion due to moisture content within the raw materials.


          Coloring Masterbatch

          Identical colors from spool to spool.


          Diameter Control

          An important machine in our production are the laser measurement systems used to check the diameter of our filament real time during production. It’s measured over 1000 times per second and helps us guarantee that each spool of BotFeeder 3d printing filament produced within tolerance. We can guarantee 0.03mm +/- on both 2.90mm and 1.75mm BotFeeder 3D Printer Filament, which means you can rest assured that your printer is extruding the exact amount of material.


          Enhanced Spool Holder

          In combination with a specially design spool and stronger material the BotFeeder spool is able to withstand the impact from dropping on the floor. From an in-house test, a typical 1kg spool of filament did not break/snap after 12 drops.


          Vacuum Sealed Packaging

          Within minutes of production a spool of BotFeeder 3d printing filament is wrapped with a protective film and then sealed airtight with a double barrier foil. To ensure minimal moisture, we upgraded to a large pack of desiccant.  To go the extra mile, we’ll also seal the fancy cardboard box that we use to ship our product. You can make sure BotFeeder 3d printing filament is fresh and ready for 3d printing when you’re done unboxing.


          BotFeeder Filament Packaging


          In-House Production

          All BotFeeder 3D Printer Filaments are produced in our own production facility, situated in the Taiwan. Since no external parties are involved in the making of BotFeeder filament we can ensure consistent quality on every order.


          In-House Testing

          The BotFeeder Testlab features a wide range of popular 3D printers. We’re continuously testing on our 3D printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community. If your not sure how to print with our materials on your 3D printer, please contact us at support@botfeeder.ca


          The following printers are used in our lab

          • Ultimaker Original
          • Ultimaker 2
          • Makerbot Replicator 2X
          • Lulzbot Mini
          • Original Pursa I3
          • Creality CR-10
          • Solidoodle 3
          • UFO Standard (Delta & E3D hot-end)
          • Rapidbot 2

          Companies who are interested in having their 3D printer(s) featured in our testlab can contact us at support@botfeeder.ca


          Care

          Storing Your Filament

          Please note that improper storage may damage your filament. To maintain its original quality, it's strongly recommended that the filament be stored in the following conditions:

          • A dehumidifier cabinet or a dry and circulated area
          • Room temperature
          • Avoid direct sunlight or heat source

          Selecting A Printer Location

          Please note poor printer location will have a negative effect on your print result and possible of damaging your filament. To select the most ideal location for your printer, please follow this guide.

          • Consistent temperature
          • Stable air flow
          • Away from furniture for safety

          Avoid Tangling Your Filament

          When unpacking, changing filament or unloading, It is strongly suggested to get a good grip at the end of the filament at all times in order to prevent tangling. The spool holder is specifically designed with 2 holes of each side, allowing you to secure the end of the filament by threading into it. or you can simply 3D print a "Filament clip" that is attached to the spool holder itself.


          BotFeeder PLA Colour Code & Filament Tracker


          If Filament Gets Damp

          Dry it slowly in room temperature. Please note that heat drying the filament will damages its quality by making it become brittle. The preferred method of drying your filament is to put in a dehumidifier cabinet or in an airtight bag with a few packs of desiccants. It's recommended to maintain a humidity level of 25% or less.

          Certifications

          To take an extra step for your safety, BotFeeder 3D Printer Filaments are being tested on an annually basis by SGS. On top of that, all our filaments are manufactured in compliance of RoHS (Restriction of Hazardous Substances).  Why is it important?  It basically means the filaments are free from lead and other potentially hazardous substances including cadmium, mercury and chromium VI, among others.


          SGS Certification


          Material Science

          BotFeeder was founded as a brand of Liing Shian Colorant Manufacturer which have been active in the masterbatch, and pigment & chemical auxiliaries for the plastics processing industry. Our knowhow, network and partnerships is driving material innovations and quality. You can expect BotFeeder to keep on developing interesting new materials, which will be tested on a variety of printers to make sure it’ll get the job done.

            $35.00 CAD
            1kg ABS Filament 1.75mm – Gray

            BotFeeder Original ABS Filament

            Engineer Grade
            Toughness
            Durable
            Impact Resistance
            Heat Resistance
            Weatherproof
            Outdoor & Indoor
            Compatible with most 3D printers on the market

            Temp. & Tips

            At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


            This profile is optimized based on UFO 3D Printer. A good reference point of where to start.
            3D printer type: delta
            Nozzle size: 0.30 mm
            Resolution: 0.10 mm
            Extrusion temperature: 250 C
            Print bed temperature: 110 C
            Print speed: 65 mm/sec (default speed)
            Adhesion type: brim
            Retraction distance: 4.5 mm
            Retraction speed: 100 mm/sec
            Prime: no
            Support infill: 15%
            Support pattern: zig zag
            Support angle: 50 degree
            Dense support layer: 2
            Dense Infill: 60%
            Upper separation layer: 1 to 2 (or 0.20 mm)
            Lower separation layer: 1 to 2 (or 0.20 mm)


            Printing Notes

            1. Extrusion Temperature: 250 to 260C
            2. Print Bed Temperature: 110 to 120C
            3. If you are printing white at 250C, black will require ~5 degree more.
            4. Let print bed cool down to room temperature before removing your print.
            5. Must print with heated print bed.
            6. Works great on glass platform, PEI, blue tape, buildtak, and kapton tape.
            7. Adhesion solution: hair spray, ABS juice, and glue stick
            8. If wrapping occurs, print using raft.
            9. Enclosure improves print quality.
            10. First layer usually 5 to 10 C higher than subsequent layers.
            11. First layer usually print at 35mm/sec or slower.
            12. ABS absorbs heat and so benefits from additional active cooling.
            13. ABS adsorbs ~5% of moisture.  Un-used spool should store in container or plastic bag.
            14. Use Acetone to smooth out the print.
            15. Sand the print down with 300-grit sandpaper before acrylic painting.
            16. Longer life span compared to PLA.
            17. More flexible compared to PLA.
            18. Can also read article on how to print with BotFeeder ABS
            Materials Quality

            Material Grade: Chi Mei Polylac PA-747
            Filament Diameter: 1.75mm or 2.90mm
            Diameter Tolerance: +/- 0.03mm
            Roundness Tolerance: +/- 0.05mm
            Filament Weight: 1kg
            Spool Length x Width: 190mm x 85mm
            Spool Hole Diameter: 38mm
            Spool Weight: 500g


            BotFeeder Original ABS is Made to Perfection.


            Raw Material

            The premium ABS grade is selected based on providing engineering needs. All virgin ABS pellets are supplied by Chi Mei Corp. a globally well-known company manufactures polylac (ABS).


            Natural Color Pigment

            All color pigments are extracted from nature. NOT chemical engineered pigment.  During the process of 3D printing, you'll noticed a pleasant sweet scent in the air.


            Filtration Treatment

            Before production, all ABS pellets and color pigments undergo a filtration process to remove any larger particles that might clogged the nozzle during printing.


            Anti-Moist Treatment

            All raw materials have undergone dying treatment before production, as the practice of which prevents 'bubbles' occurrence during extrusion due to moisture content within the raw materials.


            Coloring Masterbatch

            Identical colors from spool to spool.


            Diameter Control

            An important machine in our production are the laser measurement systems used to check the diameter of our filament real time during production. It’s measured over 1000 times per second and helps us guarantee that each spool of BotFeeder 3d printing filament produced within tolerance. We can guarantee 0.03mm +/- on both 2.90mm and 1.75mm BotFeeder 3D Printer Filament, which means you can rest assured that your printer is extruding the exact amount of material.


            Enhanced Spool Holder

            In combination with a specially design spool and stronger material the BotFeeder spool is able to withstand the impact from dropping on the floor. From an in-house test, a typical 1kg spool of filament did not break/snap after 12 drops.


            Vacuum Sealed Packaging

            Within minutes of production a spool of BotFeeder 3d printing filament is wrapped with a protective film and then sealed airtight with a double barrier foil. To ensure minimal moisture, we upgraded to a large pack of desiccant.  To go the extra mile, we’ll also seal the fancy cardboard box that we use to ship our product. You can make sure BotFeeder 3d printing filament is fresh and ready for 3d printing when you’re done unboxing.


            BotFeeder Filament Packaging


            In-House Production

            All BotFeeder 3D Printer Filaments are produced in our own production facility, situated in the Taiwan. Since no external parties are involved in the making of BotFeeder filament we can ensure consistent quality on every order.


            In-House Testing

            The BotFeeder Testlab features a wide range of popular 3D printers. We’re continuously testing on our 3D printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community. If your not sure how to print with our materials on your 3D printer, please contact us at support@botfeeder.ca


            The following printers are used in our lab

            • Ultimaker Original
            • Ultimaker 2
            • Makerbot Replicator 2X
            • Lulzbot Mini
            • Original Pursa I3
            • Creality CR-10
            • Solidoodle 3
            • UFO Standard (Delta & E3D hot-end)
            • Rapidbot 2

            Companies who are interested in having their 3D printer(s) featured in our testlab can contact us at support@botfeeder.ca


            Care

            Storing Your Filament

            Please note that improper storage may damage your filament. To maintain its original quality, it's strongly recommended that the filament be stored in the following conditions:

            • A dehumidifier cabinet or a dry and circulated area
            • Room temperature
            • Avoid direct sunlight or heat source

            Selecting A Printer Location

            Please note poor printer location will have a negative effect on your print result and possible of damaging your filament. To select the most ideal location for your printer, please follow this guide.

            • Consistent temperature
            • Stable air flow
            • Away from furniture for safety

            Avoid Tangling Your Filament

            When unpacking, changing filament or unloading, It is strongly suggested to get a good grip at the end of the filament at all times in order to prevent tangling. The spool holder is specifically designed with 2 holes of each side, allowing you to secure the end of the filament by threading into it. or you can simply 3D print a "Filament clip" that is attached to the spool holder itself.


            BotFeeder PLA Colour Code & Filament Tracker


            If Filament Gets Damp

            Dry it slowly in room temperature. Please note that heat drying the filament will damages its quality by making it become brittle. The preferred method of drying your filament is to put in a dehumidifier cabinet or in an airtight bag with a few packs of desiccants. It's recommended to maintain a humidity level of 25% or less.

            Certifications

            To take an extra step for your safety, BotFeeder 3D Printer Filaments are being tested on an annually basis by SGS. On top of that, all our filaments are manufactured in compliance of RoHS (Restriction of Hazardous Substances).  Why is it important?  It basically means the filaments are free from lead and other potentially hazardous substances including cadmium, mercury and chromium VI, among others.


            SGS Certification


            Material Science

            BotFeeder was founded as a brand of Liing Shian Colorant Manufacturer which have been active in the masterbatch, and pigment & chemical auxiliaries for the plastics processing industry. Our knowhow, network and partnerships is driving material innovations and quality. You can expect BotFeeder to keep on developing interesting new materials, which will be tested on a variety of printers to make sure it’ll get the job done.

              $35.00 CAD
              1kg ABS Filament 1.75mm – Green

              BotFeeder Original ABS Filament

              Engineer Grade
              Toughness
              Durable
              Impact Resistance
              Heat Resistance
              Weatherproof
              Outdoor & Indoor
              Compatible with most 3D printers on the market

              Temp. & Tips

              At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


              This profile is optimized based on UFO 3D Printer. A good reference point of where to start.
              3D printer type: delta
              Nozzle size: 0.30 mm
              Resolution: 0.10 mm
              Extrusion temperature: 250 C
              Print bed temperature: 110 C
              Print speed: 65 mm/sec (default speed)
              Adhesion type: brim
              Retraction distance: 4.5 mm
              Retraction speed: 100 mm/sec
              Prime: no
              Support infill: 15%
              Support pattern: zig zag
              Support angle: 50 degree
              Dense support layer: 2
              Dense Infill: 60%
              Upper separation layer: 1 to 2 (or 0.20 mm)
              Lower separation layer: 1 to 2 (or 0.20 mm)


              Printing Notes

              1. Extrusion Temperature: 250 to 260C
              2. Print Bed Temperature: 110 to 120C
              3. If you are printing white at 250C, black will require ~5 degree more.
              4. Let print bed cool down to room temperature before removing your print.
              5. Must print with heated print bed.
              6. Works great on glass platform, PEI, blue tape, buildtak, and kapton tape.
              7. Adhesion solution: hair spray, ABS juice, and glue stick
              8. If wrapping occurs, print using raft.
              9. Enclosure improves print quality.
              10. First layer usually 5 to 10 C higher than subsequent layers.
              11. First layer usually print at 35mm/sec or slower.
              12. ABS absorbs heat and so benefits from additional active cooling.
              13. ABS adsorbs ~5% of moisture.  Un-used spool should store in container or plastic bag.
              14. Use Acetone to smooth out the print.
              15. Sand the print down with 300-grit sandpaper before acrylic painting.
              16. Longer life span compared to PLA.
              17. More flexible compared to PLA.
              18. Can also read article on how to print with BotFeeder ABS
              Materials Quality

              Material Grade: Chi Mei Polylac PA-747
              Filament Diameter: 1.75mm or 2.90mm
              Diameter Tolerance: +/- 0.03mm
              Roundness Tolerance: +/- 0.05mm
              Filament Weight: 1kg
              Spool Length x Width: 190mm x 85mm
              Spool Hole Diameter: 38mm
              Spool Weight: 500g


              BotFeeder Original ABS is Made to Perfection.


              Raw Material

              The premium ABS grade is selected based on providing engineering needs. All virgin ABS pellets are supplied by Chi Mei Corp. a globally well-known company manufactures polylac (ABS).


              Natural Color Pigment

              All color pigments are extracted from nature. NOT chemical engineered pigment.  During the process of 3D printing, you'll noticed a pleasant sweet scent in the air.


              Filtration Treatment

              Before production, all ABS pellets and color pigments undergo a filtration process to remove any larger particles that might clogged the nozzle during printing.


              Anti-Moist Treatment

              All raw materials have undergone dying treatment before production, as the practice of which prevents 'bubbles' occurrence during extrusion due to moisture content within the raw materials.


              Coloring Masterbatch

              Identical colors from spool to spool.


              Diameter Control

              An important machine in our production are the laser measurement systems used to check the diameter of our filament real time during production. It’s measured over 1000 times per second and helps us guarantee that each spool of BotFeeder 3d printing filament produced within tolerance. We can guarantee 0.03mm +/- on both 2.90mm and 1.75mm BotFeeder 3D Printer Filament, which means you can rest assured that your printer is extruding the exact amount of material.


              Enhanced Spool Holder

              In combination with a specially design spool and stronger material the BotFeeder spool is able to withstand the impact from dropping on the floor. From an in-house test, a typical 1kg spool of filament did not break/snap after 12 drops.


              Vacuum Sealed Packaging

              Within minutes of production a spool of BotFeeder 3d printing filament is wrapped with a protective film and then sealed airtight with a double barrier foil. To ensure minimal moisture, we upgraded to a large pack of desiccant.  To go the extra mile, we’ll also seal the fancy cardboard box that we use to ship our product. You can make sure BotFeeder 3d printing filament is fresh and ready for 3d printing when you’re done unboxing.


              BotFeeder Filament Packaging


              In-House Production

              All BotFeeder 3D Printer Filaments are produced in our own production facility, situated in the Taiwan. Since no external parties are involved in the making of BotFeeder filament we can ensure consistent quality on every order.


              In-House Testing

              The BotFeeder Testlab features a wide range of popular 3D printers. We’re continuously testing on our 3D printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community. If your not sure how to print with our materials on your 3D printer, please contact us at support@botfeeder.ca


              The following printers are used in our lab

              • Ultimaker Original
              • Ultimaker 2
              • Makerbot Replicator 2X
              • Lulzbot Mini
              • Original Pursa I3
              • Creality CR-10
              • Solidoodle 3
              • UFO Standard (Delta & E3D hot-end)
              • Rapidbot 2

              Companies who are interested in having their 3D printer(s) featured in our testlab can contact us at support@botfeeder.ca


              Care

              Storing Your Filament

              Please note that improper storage may damage your filament. To maintain its original quality, it's strongly recommended that the filament be stored in the following conditions:

              • A dehumidifier cabinet or a dry and circulated area
              • Room temperature
              • Avoid direct sunlight or heat source

              Selecting A Printer Location

              Please note poor printer location will have a negative effect on your print result and possible of damaging your filament. To select the most ideal location for your printer, please follow this guide.

              • Consistent temperature
              • Stable air flow
              • Away from furniture for safety

              Avoid Tangling Your Filament

              When unpacking, changing filament or unloading, It is strongly suggested to get a good grip at the end of the filament at all times in order to prevent tangling. The spool holder is specifically designed with 2 holes of each side, allowing you to secure the end of the filament by threading into it. or you can simply 3D print a "Filament clip" that is attached to the spool holder itself.


              BotFeeder PLA Colour Code & Filament Tracker


              If Filament Gets Damp

              Dry it slowly in room temperature. Please note that heat drying the filament will damages its quality by making it become brittle. The preferred method of drying your filament is to put in a dehumidifier cabinet or in an airtight bag with a few packs of desiccants. It's recommended to maintain a humidity level of 25% or less.

              Certifications

              To take an extra step for your safety, BotFeeder 3D Printer Filaments are being tested on an annually basis by SGS. On top of that, all our filaments are manufactured in compliance of RoHS (Restriction of Hazardous Substances).  Why is it important?  It basically means the filaments are free from lead and other potentially hazardous substances including cadmium, mercury and chromium VI, among others.


              SGS Certification


              Material Science

              BotFeeder was founded as a brand of Liing Shian Colorant Manufacturer which have been active in the masterbatch, and pigment & chemical auxiliaries for the plastics processing industry. Our knowhow, network and partnerships is driving material innovations and quality. You can expect BotFeeder to keep on developing interesting new materials, which will be tested on a variety of printers to make sure it’ll get the job done.

                $35.00 CAD
                1kg ABS Filament 1.75mm – Orange

                BotFeeder Original ABS Filament

                Engineer Grade
                Toughness
                Durable
                Impact Resistance
                Heat Resistance
                Weatherproof
                Outdoor & Indoor
                Compatible with most 3D printers on the market

                Temp. & Tips

                At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                This profile is optimized based on UFO 3D Printer. A good reference point of where to start.
                3D printer type: delta
                Nozzle size: 0.30 mm
                Resolution: 0.10 mm
                Extrusion temperature: 250 C
                Print bed temperature: 110 C
                Print speed: 65 mm/sec (default speed)
                Adhesion type: brim
                Retraction distance: 4.5 mm
                Retraction speed: 100 mm/sec
                Prime: no
                Support infill: 15%
                Support pattern: zig zag
                Support angle: 50 degree
                Dense support layer: 2
                Dense Infill: 60%
                Upper separation layer: 1 to 2 (or 0.20 mm)
                Lower separation layer: 1 to 2 (or 0.20 mm)


                Printing Notes

                1. Extrusion Temperature: 250 to 260C
                2. Print Bed Temperature: 110 to 120C
                3. If you are printing white at 250C, black will require ~5 degree more.
                4. Let print bed cool down to room temperature before removing your print.
                5. Must print with heated print bed.
                6. Works great on glass platform, PEI, blue tape, buildtak, and kapton tape.
                7. Adhesion solution: hair spray, ABS juice, and glue stick
                8. If wrapping occurs, print using raft.
                9. Enclosure improves print quality.
                10. First layer usually 5 to 10 C higher than subsequent layers.
                11. First layer usually print at 35mm/sec or slower.
                12. ABS absorbs heat and so benefits from additional active cooling.
                13. ABS adsorbs ~5% of moisture.  Un-used spool should store in container or plastic bag.
                14. Use Acetone to smooth out the print.
                15. Sand the print down with 300-grit sandpaper before acrylic painting.
                16. Longer life span compared to PLA.
                17. More flexible compared to PLA.
                18. Can also read article on how to print with BotFeeder ABS
                Materials Quality

                Material Grade: Chi Mei Polylac PA-747
                Filament Diameter: 1.75mm or 2.90mm
                Diameter Tolerance: +/- 0.03mm
                Roundness Tolerance: +/- 0.05mm
                Filament Weight: 1kg
                Spool Length x Width: 190mm x 85mm
                Spool Hole Diameter: 38mm
                Spool Weight: 500g


                BotFeeder Original ABS is Made to Perfection.


                Raw Material

                The premium ABS grade is selected based on providing engineering needs. All virgin ABS pellets are supplied by Chi Mei Corp. a globally well-known company manufactures polylac (ABS).


                Natural Color Pigment

                All color pigments are extracted from nature. NOT chemical engineered pigment.  During the process of 3D printing, you'll noticed a pleasant sweet scent in the air.


                Filtration Treatment

                Before production, all ABS pellets and color pigments undergo a filtration process to remove any larger particles that might clogged the nozzle during printing.


                Anti-Moist Treatment

                All raw materials have undergone dying treatment before production, as the practice of which prevents 'bubbles' occurrence during extrusion due to moisture content within the raw materials.


                Coloring Masterbatch

                Identical colors from spool to spool.


                Diameter Control

                An important machine in our production are the laser measurement systems used to check the diameter of our filament real time during production. It’s measured over 1000 times per second and helps us guarantee that each spool of BotFeeder 3d printing filament produced within tolerance. We can guarantee 0.03mm +/- on both 2.90mm and 1.75mm BotFeeder 3D Printer Filament, which means you can rest assured that your printer is extruding the exact amount of material.


                Enhanced Spool Holder

                In combination with a specially design spool and stronger material the BotFeeder spool is able to withstand the impact from dropping on the floor. From an in-house test, a typical 1kg spool of filament did not break/snap after 12 drops.


                Vacuum Sealed Packaging

                Within minutes of production a spool of BotFeeder 3d printing filament is wrapped with a protective film and then sealed airtight with a double barrier foil. To ensure minimal moisture, we upgraded to a large pack of desiccant.  To go the extra mile, we’ll also seal the fancy cardboard box that we use to ship our product. You can make sure BotFeeder 3d printing filament is fresh and ready for 3d printing when you’re done unboxing.


                BotFeeder Filament Packaging


                In-House Production

                All BotFeeder 3D Printer Filaments are produced in our own production facility, situated in the Taiwan. Since no external parties are involved in the making of BotFeeder filament we can ensure consistent quality on every order.


                In-House Testing

                The BotFeeder Testlab features a wide range of popular 3D printers. We’re continuously testing on our 3D printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community. If your not sure how to print with our materials on your 3D printer, please contact us at support@botfeeder.ca


                The following printers are used in our lab

                • Ultimaker Original
                • Ultimaker 2
                • Makerbot Replicator 2X
                • Lulzbot Mini
                • Original Pursa I3
                • Creality CR-10
                • Solidoodle 3
                • UFO Standard (Delta & E3D hot-end)
                • Rapidbot 2

                Companies who are interested in having their 3D printer(s) featured in our testlab can contact us at support@botfeeder.ca


                Care

                Storing Your Filament

                Please note that improper storage may damage your filament. To maintain its original quality, it's strongly recommended that the filament be stored in the following conditions:

                • A dehumidifier cabinet or a dry and circulated area
                • Room temperature
                • Avoid direct sunlight or heat source

                Selecting A Printer Location

                Please note poor printer location will have a negative effect on your print result and possible of damaging your filament. To select the most ideal location for your printer, please follow this guide.

                • Consistent temperature
                • Stable air flow
                • Away from furniture for safety

                Avoid Tangling Your Filament

                When unpacking, changing filament or unloading, It is strongly suggested to get a good grip at the end of the filament at all times in order to prevent tangling. The spool holder is specifically designed with 2 holes of each side, allowing you to secure the end of the filament by threading into it. or you can simply 3D print a "Filament clip" that is attached to the spool holder itself.


                BotFeeder PLA Colour Code & Filament Tracker


                If Filament Gets Damp

                Dry it slowly in room temperature. Please note that heat drying the filament will damages its quality by making it become brittle. The preferred method of drying your filament is to put in a dehumidifier cabinet or in an airtight bag with a few packs of desiccants. It's recommended to maintain a humidity level of 25% or less.

                Certifications

                To take an extra step for your safety, BotFeeder 3D Printer Filaments are being tested on an annually basis by SGS. On top of that, all our filaments are manufactured in compliance of RoHS (Restriction of Hazardous Substances).  Why is it important?  It basically means the filaments are free from lead and other potentially hazardous substances including cadmium, mercury and chromium VI, among others.


                SGS Certification


                Material Science

                BotFeeder was founded as a brand of Liing Shian Colorant Manufacturer which have been active in the masterbatch, and pigment & chemical auxiliaries for the plastics processing industry. Our knowhow, network and partnerships is driving material innovations and quality. You can expect BotFeeder to keep on developing interesting new materials, which will be tested on a variety of printers to make sure it’ll get the job done.

                  $35.00 CAD
                  1kg ABS Filament 1.75mm – Purple

                  BotFeeder Original ABS Filament

                  Engineer Grade
                  Toughness
                  Durable
                  Impact Resistance
                  Heat Resistance
                  Weatherproof
                  Outdoor & Indoor
                  Compatible with most 3D printers on the market

                  Temp. & Tips

                  At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                  This profile is optimized based on UFO 3D Printer. A good reference point of where to start.
                  3D printer type: delta
                  Nozzle size: 0.30 mm
                  Resolution: 0.10 mm
                  Extrusion temperature: 250 C
                  Print bed temperature: 110 C
                  Print speed: 65 mm/sec (default speed)
                  Adhesion type: brim
                  Retraction distance: 4.5 mm
                  Retraction speed: 100 mm/sec
                  Prime: no
                  Support infill: 15%
                  Support pattern: zig zag
                  Support angle: 50 degree
                  Dense support layer: 2
                  Dense Infill: 60%
                  Upper separation layer: 1 to 2 (or 0.20 mm)
                  Lower separation layer: 1 to 2 (or 0.20 mm)


                  Printing Notes

                  1. Extrusion Temperature: 250 to 260C
                  2. Print Bed Temperature: 110 to 120C
                  3. If you are printing white at 250C, black will require ~5 degree more.
                  4. Let print bed cool down to room temperature before removing your print.
                  5. Must print with heated print bed.
                  6. Works great on glass platform, PEI, blue tape, buildtak, and kapton tape.
                  7. Adhesion solution: hair spray, ABS juice, and glue stick
                  8. If wrapping occurs, print using raft.
                  9. Enclosure improves print quality.
                  10. First layer usually 5 to 10 C higher than subsequent layers.
                  11. First layer usually print at 35mm/sec or slower.
                  12. ABS absorbs heat and so benefits from additional active cooling.
                  13. ABS adsorbs ~5% of moisture.  Un-used spool should store in container or plastic bag.
                  14. Use Acetone to smooth out the print.
                  15. Sand the print down with 300-grit sandpaper before acrylic painting.
                  16. Longer life span compared to PLA.
                  17. More flexible compared to PLA.
                  18. Can also read article on how to print with BotFeeder ABS
                  Materials Quality

                  Material Grade: Chi Mei Polylac PA-747
                  Filament Diameter: 1.75mm or 2.90mm
                  Diameter Tolerance: +/- 0.03mm
                  Roundness Tolerance: +/- 0.05mm
                  Filament Weight: 1kg
                  Spool Length x Width: 190mm x 85mm
                  Spool Hole Diameter: 38mm
                  Spool Weight: 500g


                  BotFeeder Original ABS is Made to Perfection.


                  Raw Material

                  The premium ABS grade is selected based on providing engineering needs. All virgin ABS pellets are supplied by Chi Mei Corp. a globally well-known company manufactures polylac (ABS).


                  Natural Color Pigment

                  All color pigments are extracted from nature. NOT chemical engineered pigment.  During the process of 3D printing, you'll noticed a pleasant sweet scent in the air.


                  Filtration Treatment

                  Before production, all ABS pellets and color pigments undergo a filtration process to remove any larger particles that might clogged the nozzle during printing.


                  Anti-Moist Treatment

                  All raw materials have undergone dying treatment before production, as the practice of which prevents 'bubbles' occurrence during extrusion due to moisture content within the raw materials.


                  Coloring Masterbatch

                  Identical colors from spool to spool.


                  Diameter Control

                  An important machine in our production are the laser measurement systems used to check the diameter of our filament real time during production. It’s measured over 1000 times per second and helps us guarantee that each spool of BotFeeder 3d printing filament produced within tolerance. We can guarantee 0.03mm +/- on both 2.90mm and 1.75mm BotFeeder 3D Printer Filament, which means you can rest assured that your printer is extruding the exact amount of material.


                  Enhanced Spool Holder

                  In combination with a specially design spool and stronger material the BotFeeder spool is able to withstand the impact from dropping on the floor. From an in-house test, a typical 1kg spool of filament did not break/snap after 12 drops.


                  Vacuum Sealed Packaging

                  Within minutes of production a spool of BotFeeder 3d printing filament is wrapped with a protective film and then sealed airtight with a double barrier foil. To ensure minimal moisture, we upgraded to a large pack of desiccant.  To go the extra mile, we’ll also seal the fancy cardboard box that we use to ship our product. You can make sure BotFeeder 3d printing filament is fresh and ready for 3d printing when you’re done unboxing.


                  BotFeeder Filament Packaging


                  In-House Production

                  All BotFeeder 3D Printer Filaments are produced in our own production facility, situated in the Taiwan. Since no external parties are involved in the making of BotFeeder filament we can ensure consistent quality on every order.


                  In-House Testing

                  The BotFeeder Testlab features a wide range of popular 3D printers. We’re continuously testing on our 3D printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community. If your not sure how to print with our materials on your 3D printer, please contact us at support@botfeeder.ca


                  The following printers are used in our lab

                  • Ultimaker Original
                  • Ultimaker 2
                  • Makerbot Replicator 2X
                  • Lulzbot Mini
                  • Original Pursa I3
                  • Creality CR-10
                  • Solidoodle 3
                  • UFO Standard (Delta & E3D hot-end)
                  • Rapidbot 2

                  Companies who are interested in having their 3D printer(s) featured in our testlab can contact us at support@botfeeder.ca


                  Care

                  Storing Your Filament

                  Please note that improper storage may damage your filament. To maintain its original quality, it's strongly recommended that the filament be stored in the following conditions:

                  • A dehumidifier cabinet or a dry and circulated area
                  • Room temperature
                  • Avoid direct sunlight or heat source

                  Selecting A Printer Location

                  Please note poor printer location will have a negative effect on your print result and possible of damaging your filament. To select the most ideal location for your printer, please follow this guide.

                  • Consistent temperature
                  • Stable air flow
                  • Away from furniture for safety

                  Avoid Tangling Your Filament

                  When unpacking, changing filament or unloading, It is strongly suggested to get a good grip at the end of the filament at all times in order to prevent tangling. The spool holder is specifically designed with 2 holes of each side, allowing you to secure the end of the filament by threading into it. or you can simply 3D print a "Filament clip" that is attached to the spool holder itself.


                  BotFeeder PLA Colour Code & Filament Tracker


                  If Filament Gets Damp

                  Dry it slowly in room temperature. Please note that heat drying the filament will damages its quality by making it become brittle. The preferred method of drying your filament is to put in a dehumidifier cabinet or in an airtight bag with a few packs of desiccants. It's recommended to maintain a humidity level of 25% or less.

                  Certifications

                  To take an extra step for your safety, BotFeeder 3D Printer Filaments are being tested on an annually basis by SGS. On top of that, all our filaments are manufactured in compliance of RoHS (Restriction of Hazardous Substances).  Why is it important?  It basically means the filaments are free from lead and other potentially hazardous substances including cadmium, mercury and chromium VI, among others.


                  SGS Certification


                  Material Science

                  BotFeeder was founded as a brand of Liing Shian Colorant Manufacturer which have been active in the masterbatch, and pigment & chemical auxiliaries for the plastics processing industry. Our knowhow, network and partnerships is driving material innovations and quality. You can expect BotFeeder to keep on developing interesting new materials, which will be tested on a variety of printers to make sure it’ll get the job done.

                    $35.00 CAD
                    1kg ABS Filament 1.75mm – Red

                    BotFeeder Original ABS Filament

                    Engineer Grade
                    Toughness
                    Durable
                    Impact Resistance
                    Heat Resistance
                    Weatherproof
                    Outdoor & Indoor
                    Compatible with most 3D printers on the market

                    Temp. & Tips

                    At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                    This profile is optimized based on UFO 3D Printer. A good reference point of where to start.
                    3D printer type: delta
                    Nozzle size: 0.30 mm
                    Resolution: 0.10 mm
                    Extrusion temperature: 250 C
                    Print bed temperature: 110 C
                    Print speed: 65 mm/sec (default speed)
                    Adhesion type: brim
                    Retraction distance: 4.5 mm
                    Retraction speed: 100 mm/sec
                    Prime: no
                    Support infill: 15%
                    Support pattern: zig zag
                    Support angle: 50 degree
                    Dense support layer: 2
                    Dense Infill: 60%
                    Upper separation layer: 1 to 2 (or 0.20 mm)
                    Lower separation layer: 1 to 2 (or 0.20 mm)


                    Printing Notes

                    1. Extrusion Temperature: 250 to 260C
                    2. Print Bed Temperature: 110 to 120C
                    3. If you are printing white at 250C, black will require ~5 degree more.
                    4. Let print bed cool down to room temperature before removing your print.
                    5. Must print with heated print bed.
                    6. Works great on glass platform, PEI, blue tape, buildtak, and kapton tape.
                    7. Adhesion solution: hair spray, ABS juice, and glue stick
                    8. If wrapping occurs, print using raft.
                    9. Enclosure improves print quality.
                    10. First layer usually 5 to 10 C higher than subsequent layers.
                    11. First layer usually print at 35mm/sec or slower.
                    12. ABS absorbs heat and so benefits from additional active cooling.
                    13. ABS adsorbs ~5% of moisture.  Un-used spool should store in container or plastic bag.
                    14. Use Acetone to smooth out the print.
                    15. Sand the print down with 300-grit sandpaper before acrylic painting.
                    16. Longer life span compared to PLA.
                    17. More flexible compared to PLA.
                    18. Can also read article on how to print with BotFeeder ABS
                    Materials Quality

                    Material Grade: Chi Mei Polylac PA-747
                    Filament Diameter: 1.75mm or 2.90mm
                    Diameter Tolerance: +/- 0.03mm
                    Roundness Tolerance: +/- 0.05mm
                    Filament Weight: 1kg
                    Spool Length x Width: 190mm x 85mm
                    Spool Hole Diameter: 38mm
                    Spool Weight: 500g


                    BotFeeder Original ABS is Made to Perfection.


                    Raw Material

                    The premium ABS grade is selected based on providing engineering needs. All virgin ABS pellets are supplied by Chi Mei Corp. a globally well-known company manufactures polylac (ABS).


                    Natural Color Pigment

                    All color pigments are extracted from nature. NOT chemical engineered pigment.  During the process of 3D printing, you'll noticed a pleasant sweet scent in the air.


                    Filtration Treatment

                    Before production, all ABS pellets and color pigments undergo a filtration process to remove any larger particles that might clogged the nozzle during printing.


                    Anti-Moist Treatment

                    All raw materials have undergone dying treatment before production, as the practice of which prevents 'bubbles' occurrence during extrusion due to moisture content within the raw materials.


                    Coloring Masterbatch

                    Identical colors from spool to spool.


                    Diameter Control

                    An important machine in our production are the laser measurement systems used to check the diameter of our filament real time during production. It’s measured over 1000 times per second and helps us guarantee that each spool of BotFeeder 3d printing filament produced within tolerance. We can guarantee 0.03mm +/- on both 2.90mm and 1.75mm BotFeeder 3D Printer Filament, which means you can rest assured that your printer is extruding the exact amount of material.


                    Enhanced Spool Holder

                    In combination with a specially design spool and stronger material the BotFeeder spool is able to withstand the impact from dropping on the floor. From an in-house test, a typical 1kg spool of filament did not break/snap after 12 drops.


                    Vacuum Sealed Packaging

                    Within minutes of production a spool of BotFeeder 3d printing filament is wrapped with a protective film and then sealed airtight with a double barrier foil. To ensure minimal moisture, we upgraded to a large pack of desiccant.  To go the extra mile, we’ll also seal the fancy cardboard box that we use to ship our product. You can make sure BotFeeder 3d printing filament is fresh and ready for 3d printing when you’re done unboxing.


                    BotFeeder Filament Packaging


                    In-House Production

                    All BotFeeder 3D Printer Filaments are produced in our own production facility, situated in the Taiwan. Since no external parties are involved in the making of BotFeeder filament we can ensure consistent quality on every order.


                    In-House Testing

                    The BotFeeder Testlab features a wide range of popular 3D printers. We’re continuously testing on our 3D printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community. If your not sure how to print with our materials on your 3D printer, please contact us at support@botfeeder.ca


                    The following printers are used in our lab

                    • Ultimaker Original
                    • Ultimaker 2
                    • Makerbot Replicator 2X
                    • Lulzbot Mini
                    • Original Pursa I3
                    • Creality CR-10
                    • Solidoodle 3
                    • UFO Standard (Delta & E3D hot-end)
                    • Rapidbot 2

                    Companies who are interested in having their 3D printer(s) featured in our testlab can contact us at support@botfeeder.ca


                    Care

                    Storing Your Filament

                    Please note that improper storage may damage your filament. To maintain its original quality, it's strongly recommended that the filament be stored in the following conditions:

                    • A dehumidifier cabinet or a dry and circulated area
                    • Room temperature
                    • Avoid direct sunlight or heat source

                    Selecting A Printer Location

                    Please note poor printer location will have a negative effect on your print result and possible of damaging your filament. To select the most ideal location for your printer, please follow this guide.

                    • Consistent temperature
                    • Stable air flow
                    • Away from furniture for safety

                    Avoid Tangling Your Filament

                    When unpacking, changing filament or unloading, It is strongly suggested to get a good grip at the end of the filament at all times in order to prevent tangling. The spool holder is specifically designed with 2 holes of each side, allowing you to secure the end of the filament by threading into it. or you can simply 3D print a "Filament clip" that is attached to the spool holder itself.


                    BotFeeder PLA Colour Code & Filament Tracker


                    If Filament Gets Damp

                    Dry it slowly in room temperature. Please note that heat drying the filament will damages its quality by making it become brittle. The preferred method of drying your filament is to put in a dehumidifier cabinet or in an airtight bag with a few packs of desiccants. It's recommended to maintain a humidity level of 25% or less.

                    Certifications

                    To take an extra step for your safety, BotFeeder 3D Printer Filaments are being tested on an annually basis by SGS. On top of that, all our filaments are manufactured in compliance of RoHS (Restriction of Hazardous Substances).  Why is it important?  It basically means the filaments are free from lead and other potentially hazardous substances including cadmium, mercury and chromium VI, among others.


                    SGS Certification


                    Material Science

                    BotFeeder was founded as a brand of Liing Shian Colorant Manufacturer which have been active in the masterbatch, and pigment & chemical auxiliaries for the plastics processing industry. Our knowhow, network and partnerships is driving material innovations and quality. You can expect BotFeeder to keep on developing interesting new materials, which will be tested on a variety of printers to make sure it’ll get the job done.

                      $35.00 CAD
                      1kg ABS Filament 1.75mm – Silver