ABS

.
1kg ABS Filament 2.90mm – Yellow

  • Engineer grade
  • Easy to use
  • Durable & tough
  • Impact & heat resistance
  • Indoor & outdoor uses
  • Compatible with most 3D printers on the market
  • Certified by SGS
  • Backed by our 60 days warranty

If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


Health Check

If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

  • Eye, nose and throat irritation
  • Headache, loss of concentration and nausea
  • Allergic skin reaction
  • Dizziness
    SETTINGS

    At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


    Our Recommendation Settings

    Extrusion temperature: 250 to 260 C
    Print bed temperature: 110 to 120 C
    Print speed: 30 to 90 mm/sec
    Layer thickness: 0.05 to 0.40 mm


    For more tricks and tips, please refer to our page: How to print with BotFeeder ABS?


    DELIVERY

    > View our full list of delivery rates to the USA and Canada.


    We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


    For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


    For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


    60 DAYS WARRANTY

    BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


    > View more information

      $24.99 CAD
      1kg ABS Filament 1.75mm – Yellow

      • Engineer grade
      • Easy to use
      • Durable & tough
      • Impact & heat resistance
      • Indoor & outdoor uses
      • Compatible with most 3D printers on the market
      • Certified by SGS
      • Backed by our 60 days warranty

      If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


      Health Check

      If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

      • Eye, nose and throat irritation
      • Headache, loss of concentration and nausea
      • Allergic skin reaction
      • Dizziness
        SETTINGS

        At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


        Our Recommendation Settings

        Extrusion temperature: 250 to 260 C
        Print bed temperature: 110 to 120 C
        Print speed: 30 to 90 mm/sec
        Layer thickness: 0.05 to 0.40 mm


        For more tricks and tips, please refer to our page: How to print with BotFeeder ABS?


        DELIVERY

        > View our full list of delivery rates to the USA and Canada.


        We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


        For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


        For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


        60 DAYS WARRANTY

        BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


        > View more information

          $24.99 CAD
          1kg ABS Filament 2.90mm – White

          • Engineer grade
          • Easy to use
          • Durable & tough
          • Impact & heat resistance
          • Indoor & outdoor uses
          • Compatible with most 3D printers on the market
          • Certified by SGS
          • Backed by our 60 days warranty

          If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


          Health Check

          If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

          • Eye, nose and throat irritation
          • Headache, loss of concentration and nausea
          • Allergic skin reaction
          • Dizziness
            SETTINGS

            At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


            Our Recommendation Settings

            Extrusion temperature: 250 to 260 C
            Print bed temperature: 110 to 120 C
            Print speed: 30 to 90 mm/sec
            Layer thickness: 0.05 to 0.40 mm


            For more tricks and tips, please refer to our page: How to print with BotFeeder ABS?


            DELIVERY

            > View our full list of delivery rates to the USA and Canada.


            We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


            For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


            For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


            60 DAYS WARRANTY

            BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


            > View more information

              $24.99 CAD
              1kg ABS Filament 1.75mm – White

              • Engineer grade
              • Easy to use
              • Durable & tough
              • Impact & heat resistance
              • Indoor & outdoor uses
              • Compatible with most 3D printers on the market
              • Certified by SGS
              • Backed by our 60 days warranty

              If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


              Health Check

              If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

              • Eye, nose and throat irritation
              • Headache, loss of concentration and nausea
              • Allergic skin reaction
              • Dizziness
                SETTINGS

                At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                Our Recommendation Settings

                Extrusion temperature: 250 to 260 C
                Print bed temperature: 110 to 120 C
                Print speed: 30 to 90 mm/sec
                Layer thickness: 0.05 to 0.40 mm


                For more tricks and tips, please refer to our page: How to print with BotFeeder ABS?


                DELIVERY

                > View our full list of delivery rates to the USA and Canada.


                We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                60 DAYS WARRANTY

                BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                > View more information

                  $24.99 CAD
                  1kg ABS Filament 2.90mm – Silver

                  • Engineer grade
                  • Easy to use
                  • Durable & tough
                  • Impact & heat resistance
                  • Indoor & outdoor uses
                  • Compatible with most 3D printers on the market
                  • Certified by SGS
                  • Backed by our 60 days warranty

                  If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                  Health Check

                  If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                  • Eye, nose and throat irritation
                  • Headache, loss of concentration and nausea
                  • Allergic skin reaction
                  • Dizziness
                    SETTINGS

                    At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                    Our Recommendation Settings

                    Extrusion temperature: 250 to 260 C
                    Print bed temperature: 110 to 120 C
                    Print speed: 30 to 90 mm/sec
                    Layer thickness: 0.05 to 0.40 mm


                    For more tricks and tips, please refer to our page: How to print with BotFeeder ABS?


                    DELIVERY

                    > View our full list of delivery rates to the USA and Canada.


                    We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                    For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                    For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                    60 DAYS WARRANTY

                    BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                    > View more information

                      $24.99 CAD
                      1kg ABS Filament 1.75mm – Silver

                      • Engineer grade
                      • Easy to use
                      • Durable & tough
                      • Impact & heat resistance
                      • Indoor & outdoor uses
                      • Compatible with most 3D printers on the market
                      • Certified by SGS
                      • Backed by our 60 days warranty

                      If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                      Health Check

                      If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                      • Eye, nose and throat irritation
                      • Headache, loss of concentration and nausea
                      • Allergic skin reaction
                      • Dizziness
                        SETTINGS

                        At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                        Our Recommendation Settings

                        Extrusion temperature: 250 to 260 C
                        Print bed temperature: 110 to 120 C
                        Print speed: 30 to 90 mm/sec
                        Layer thickness: 0.05 to 0.40 mm


                        For more tricks and tips, please refer to our page: How to print with BotFeeder ABS?


                        DELIVERY

                        > View our full list of delivery rates to the USA and Canada.


                        We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                        For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                        For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                        60 DAYS WARRANTY

                        BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                        > View more information

                          $24.99 CAD
                          1kg ABS Filament 2.90mm – Red

                          • Engineer grade
                          • Easy to use
                          • Durable & tough
                          • Impact & heat resistance
                          • Indoor & outdoor uses
                          • Compatible with most 3D printers on the market
                          • Certified by SGS
                          • Backed by our 60 days warranty

                          If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                          Health Check

                          If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                          • Eye, nose and throat irritation
                          • Headache, loss of concentration and nausea
                          • Allergic skin reaction
                          • Dizziness
                            SETTINGS

                            At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                            Our Recommendation Settings

                            Extrusion temperature: 250 to 260 C
                            Print bed temperature: 110 to 120 C
                            Print speed: 30 to 90 mm/sec
                            Layer thickness: 0.05 to 0.40 mm


                            For more tricks and tips, please refer to our page: How to print with BotFeeder ABS?


                            DELIVERY

                            > View our full list of delivery rates to the USA and Canada.


                            We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                            For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                            For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                            60 DAYS WARRANTY

                            BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                            > View more information

                              $24.99 CAD
                              1kg ABS Filament 1.75mm – Red

                              • Engineer grade
                              • Easy to use
                              • Durable & tough
                              • Impact & heat resistance
                              • Indoor & outdoor uses
                              • Compatible with most 3D printers on the market
                              • Certified by SGS
                              • Backed by our 60 days warranty

                              If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                              Health Check

                              If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                              • Eye, nose and throat irritation
                              • Headache, loss of concentration and nausea
                              • Allergic skin reaction
                              • Dizziness
                                SETTINGS

                                At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                Our Recommendation Settings

                                Extrusion temperature: 250 to 260 C
                                Print bed temperature: 110 to 120 C
                                Print speed: 30 to 90 mm/sec
                                Layer thickness: 0.05 to 0.40 mm


                                For more tricks and tips, please refer to our page: How to print with BotFeeder ABS?


                                DELIVERY

                                > View our full list of delivery rates to the USA and Canada.


                                We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                                For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                                For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                                60 DAYS WARRANTY

                                BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                                > View more information

                                  $24.99 CAD
                                  1kg ABS Filament 2.90mm – Purple

                                  • Engineer grade
                                  • Easy to use
                                  • Durable & tough
                                  • Impact & heat resistance
                                  • Indoor & outdoor uses
                                  • Compatible with most 3D printers on the market
                                  • Certified by SGS
                                  • Backed by our 60 days warranty

                                  If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                                  Health Check

                                  If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                                  • Eye, nose and throat irritation
                                  • Headache, loss of concentration and nausea
                                  • Allergic skin reaction
                                  • Dizziness
                                    SETTINGS

                                    At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                    Our Recommendation Settings

                                    Extrusion temperature: 250 to 260 C
                                    Print bed temperature: 110 to 120 C
                                    Print speed: 30 to 90 mm/sec
                                    Layer thickness: 0.05 to 0.40 mm


                                    For more tricks and tips, please refer to our page: How to print with BotFeeder ABS?


                                    DELIVERY

                                    > View our full list of delivery rates to the USA and Canada.


                                    We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                                    For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                                    For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                                    60 DAYS WARRANTY

                                    BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                                    > View more information

                                      $24.99 CAD
                                      1kg ABS Filament 1.75mm – Purple

                                      • Engineer grade
                                      • Easy to use
                                      • Durable & tough
                                      • Impact & heat resistance
                                      • Indoor & outdoor uses
                                      • Compatible with most 3D printers on the market
                                      • Certified by SGS
                                      • Backed by our 60 days warranty

                                      If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                                      Health Check

                                      If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                                      • Eye, nose and throat irritation
                                      • Headache, loss of concentration and nausea
                                      • Allergic skin reaction
                                      • Dizziness
                                        SETTINGS

                                        At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                        Our Recommendation Settings

                                        Extrusion temperature: 250 to 260 C
                                        Print bed temperature: 110 to 120 C
                                        Print speed: 30 to 90 mm/sec
                                        Layer thickness: 0.05 to 0.40 mm


                                        For more tricks and tips, please refer to our page: How to print with BotFeeder ABS?


                                        DELIVERY

                                        > View our full list of delivery rates to the USA and Canada.


                                        We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                                        For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                                        For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                                        60 DAYS WARRANTY

                                        BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                                        > View more information

                                          $24.99 CAD
                                          1kg ABS Filament 2.90mm – Orange

                                          • Engineer grade
                                          • Easy to use
                                          • Durable & tough
                                          • Impact & heat resistance
                                          • Indoor & outdoor uses
                                          • Compatible with most 3D printers on the market
                                          • Certified by SGS
                                          • Backed by our 60 days warranty

                                          If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                                          Health Check

                                          If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                                          • Eye, nose and throat irritation
                                          • Headache, loss of concentration and nausea
                                          • Allergic skin reaction
                                          • Dizziness
                                            SETTINGS

                                            At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                            Our Recommendation Settings

                                            Extrusion temperature: 250 to 260 C
                                            Print bed temperature: 110 to 120 C
                                            Print speed: 30 to 90 mm/sec
                                            Layer thickness: 0.05 to 0.40 mm


                                            For more tricks and tips, please refer to our page: How to print with BotFeeder ABS?


                                            DELIVERY

                                            > View our full list of delivery rates to the USA and Canada.


                                            We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                                            For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                                            For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                                            60 DAYS WARRANTY

                                            BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                                            > View more information

                                              $24.99 CAD
                                              1kg ABS Filament 1.75mm – Orange

                                              • Engineer grade
                                              • Easy to use
                                              • Durable & tough
                                              • Impact & heat resistance
                                              • Indoor & outdoor uses
                                              • Compatible with most 3D printers on the market
                                              • Certified by SGS
                                              • Backed by our 60 days warranty

                                              If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                                              Health Check

                                              If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                                              • Eye, nose and throat irritation
                                              • Headache, loss of concentration and nausea
                                              • Allergic skin reaction
                                              • Dizziness
                                                SETTINGS

                                                At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                                Our Recommendation Settings

                                                Extrusion temperature: 250 to 260 C
                                                Print bed temperature: 110 to 120 C
                                                Print speed: 30 to 90 mm/sec
                                                Layer thickness: 0.05 to 0.40 mm


                                                For more tricks and tips, please refer to our page: How to print with BotFeeder ABS?


                                                DELIVERY

                                                > View our full list of delivery rates to the USA and Canada.


                                                We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                                                For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                                                For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                                                60 DAYS WARRANTY

                                                BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                                                > View more information

                                                  $24.99 CAD
                                                  1kg ABS Filament 2.90mm – Green

                                                  • Engineer grade
                                                  • Easy to use
                                                  • Durable & tough
                                                  • Impact & heat resistance
                                                  • Indoor & outdoor uses
                                                  • Compatible with most 3D printers on the market
                                                  • Certified by SGS
                                                  • Backed by our 60 days warranty

                                                  If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                                                  Health Check

                                                  If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                                                  • Eye, nose and throat irritation
                                                  • Headache, loss of concentration and nausea
                                                  • Allergic skin reaction
                                                  • Dizziness
                                                    SETTINGS

                                                    At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                                    Our Recommendation Settings

                                                    Extrusion temperature: 250 to 260 C
                                                    Print bed temperature: 110 to 120 C
                                                    Print speed: 30 to 90 mm/sec
                                                    Layer thickness: 0.05 to 0.40 mm


                                                    For more tricks and tips, please refer to our page: How to print with BotFeeder ABS?


                                                    DELIVERY

                                                    > View our full list of delivery rates to the USA and Canada.


                                                    We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                                                    For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                                                    For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                                                    60 DAYS WARRANTY

                                                    BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                                                    > View more information

                                                      $24.99 CAD
                                                      1kg ABS Filament 1.75mm – Green

                                                      • Engineer grade
                                                      • Easy to use
                                                      • Durable & tough
                                                      • Impact & heat resistance
                                                      • Indoor & outdoor uses
                                                      • Compatible with most 3D printers on the market
                                                      • Certified by SGS
                                                      • Backed by our 60 days warranty

                                                      If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                                                      Health Check

                                                      If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                                                      • Eye, nose and throat irritation
                                                      • Headache, loss of concentration and nausea
                                                      • Allergic skin reaction
                                                      • Dizziness
                                                        SETTINGS

                                                        At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                                        Our Recommendation Settings

                                                        Extrusion temperature: 250 to 260 C
                                                        Print bed temperature: 110 to 120 C
                                                        Print speed: 30 to 90 mm/sec
                                                        Layer thickness: 0.05 to 0.40 mm


                                                        For more tricks and tips, please refer to our page: How to print with BotFeeder ABS?


                                                        DELIVERY

                                                        > View our full list of delivery rates to the USA and Canada.


                                                        We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                                                        For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                                                        For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                                                        60 DAYS WARRANTY

                                                        BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                                                        > View more information

                                                          $24.99 CAD
                                                          1kg ABS Filament 2.90mm – Gray

                                                          • Engineer grade
                                                          • Easy to use
                                                          • Durable & tough
                                                          • Impact & heat resistance
                                                          • Indoor & outdoor uses
                                                          • Compatible with most 3D printers on the market
                                                          • Certified by SGS
                                                          • Backed by our 60 days warranty

                                                          If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                                                          Health Check

                                                          If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                                                          • Eye, nose and throat irritation
                                                          • Headache, loss of concentration and nausea
                                                          • Allergic skin reaction
                                                          • Dizziness
                                                            SETTINGS

                                                            At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                                            Our Recommendation Settings

                                                            Extrusion temperature: 250 to 260 C
                                                            Print bed temperature: 110 to 120 C
                                                            Print speed: 30 to 90 mm/sec
                                                            Layer thickness: 0.05 to 0.40 mm


                                                            For more tricks and tips, please refer to our page: How to print with BotFeeder ABS?


                                                            DELIVERY

                                                            > View our full list of delivery rates to the USA and Canada.


                                                            We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                                                            For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                                                            For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                                                            60 DAYS WARRANTY

                                                            BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                                                            > View more information

                                                              $24.99 CAD
                                                              1kg ABS Filament 1.75mm – Gray

                                                              • Engineer grade
                                                              • Easy to use
                                                              • Durable & tough
                                                              • Impact & heat resistance
                                                              • Indoor & outdoor uses
                                                              • Compatible with most 3D printers on the market
                                                              • Certified by SGS
                                                              • Backed by our 60 days warranty

                                                              If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                                                              Health Check

                                                              If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                                                              • Eye, nose and throat irritation
                                                              • Headache, loss of concentration and nausea
                                                              • Allergic skin reaction
                                                              • Dizziness
                                                                SETTINGS

                                                                At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                                                Our Recommendation Settings

                                                                Extrusion temperature: 250 to 260 C
                                                                Print bed temperature: 110 to 120 C
                                                                Print speed: 30 to 90 mm/sec
                                                                Layer thickness: 0.05 to 0.40 mm


                                                                For more tricks and tips, please refer to our page: How to print with BotFeeder ABS?


                                                                DELIVERY

                                                                > View our full list of delivery rates to the USA and Canada.


                                                                We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                                                                For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                                                                For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                                                                60 DAYS WARRANTY

                                                                BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                                                                > View more information

                                                                  $24.99 CAD

                                                                  • Engineer grade
                                                                  • Easy to use
                                                                  • Durable & tough
                                                                  • Impact & heat resistance
                                                                  • Indoor & outdoor uses
                                                                  • Compatible with most 3D printers on the market
                                                                  • Certified by SGS
                                                                  • Backed by our 60 days warranty

                                                                  If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                                                                  Health Check

                                                                  If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                                                                  • Eye, nose and throat irritation
                                                                  • Headache, loss of concentration and nausea
                                                                  • Allergic skin reaction
                                                                  • Dizziness
                                                                    SETTINGS

                                                                    At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                                                    Our Recommendation Settings

                                                                    Extrusion temperature: 250 to 260 C
                                                                    Print bed temperature: 110 to 120 C
                                                                    Print speed: 30 to 90 mm/sec
                                                                    Layer thickness: 0.05 to 0.40 mm


                                                                    For more tricks and tips, please refer to our page: How to print with BotFeeder ABS?


                                                                    DELIVERY

                                                                    > View our full list of delivery rates to the USA and Canada.


                                                                    We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                                                                    For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                                                                    For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                                                                    60 DAYS WARRANTY

                                                                    BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                                                                    > View more information

                                                                      Sold Out
                                                                      1kg ABS Filament 1.75mm – Blue

                                                                      • Engineer grade
                                                                      • Easy to use
                                                                      • Durable & tough
                                                                      • Impact & heat resistance
                                                                      • Indoor & outdoor uses
                                                                      • Compatible with most 3D printers on the market
                                                                      • Certified by SGS
                                                                      • Backed by our 60 days warranty

                                                                      If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                                                                      Health Check

                                                                      If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                                                                      • Eye, nose and throat irritation
                                                                      • Headache, loss of concentration and nausea
                                                                      • Allergic skin reaction
                                                                      • Dizziness
                                                                        SETTINGS

                                                                        At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                                                        Our Recommendation Settings

                                                                        Extrusion temperature: 250 to 260 C
                                                                        Print bed temperature: 110 to 120 C
                                                                        Print speed: 30 to 90 mm/sec
                                                                        Layer thickness: 0.05 to 0.40 mm


                                                                        For more tricks and tips, please refer to our page: How to print with BotFeeder ABS?


                                                                        DELIVERY

                                                                        > View our full list of delivery rates to the USA and Canada.


                                                                        We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                                                                        For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                                                                        For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                                                                        60 DAYS WARRANTY

                                                                        BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                                                                        > View more information

                                                                          $24.99 CAD
                                                                          1kg ABS Filament 2.90mm  – Black

                                                                          • Engineer grade
                                                                          • Easy to use
                                                                          • Durable & tough
                                                                          • Impact & heat resistance
                                                                          • Indoor & outdoor uses
                                                                          • Compatible with most 3D printers on the market
                                                                          • Certified by SGS
                                                                          • Backed by our 60 days warranty

                                                                          If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                                                                          Health Check

                                                                          If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                                                                          • Eye, nose and throat irritation
                                                                          • Headache, loss of concentration and nausea
                                                                          • Allergic skin reaction
                                                                          • Dizziness
                                                                            SETTINGS

                                                                            At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                                                            Our Recommendation Settings

                                                                            Extrusion temperature: 250 to 260 C
                                                                            Print bed temperature: 110 to 120 C
                                                                            Print speed: 30 to 90 mm/sec
                                                                            Layer thickness: 0.05 to 0.40 mm


                                                                            For more tricks and tips, please refer to our page: How to print with BotFeeder ABS?


                                                                            DELIVERY

                                                                            > View our full list of delivery rates to the USA and Canada.


                                                                            We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                                                                            For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                                                                            For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                                                                            60 DAYS WARRANTY

                                                                            BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                                                                            > View more information

                                                                              $24.99 CAD
                                                                              1kg ABS Filament 1.75mm  – Black

                                                                              • Engineer grade
                                                                              • Easy to use
                                                                              • Durable & tough
                                                                              • Impact & heat resistance
                                                                              • Indoor & outdoor uses
                                                                              • Compatible with most 3D printers on the market
                                                                              • Certified by SGS
                                                                              • Backed by our 60 days warranty

                                                                              If you're interested in maintaining your filaments in top condition, check out our Filament Care page.


                                                                              Health Check

                                                                              If you are suffering from any of the symptoms below, you might be "overexposure to VOCs".

                                                                              • Eye, nose and throat irritation
                                                                              • Headache, loss of concentration and nausea
                                                                              • Allergic skin reaction
                                                                              • Dizziness
                                                                                SETTINGS

                                                                                At BotFeeder we have a well equipped 3D printing studio with a lot of popular 3D printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using BotFeeder 3D printing filament.


                                                                                Our Recommendation Settings

                                                                                Extrusion temperature: 250 to 260 C
                                                                                Print bed temperature: 110 to 120 C
                                                                                Print speed: 30 to 90 mm/sec
                                                                                Layer thickness: 0.05 to 0.40 mm


                                                                                For more tricks and tips, please refer to our page: How to print with BotFeeder ABS?


                                                                                DELIVERY

                                                                                > View our full list of delivery rates to the USA and Canada.


                                                                                We usually dispatch orders within 2 working days. Delivery time vary based on selected service and destination.


                                                                                For orders in Canada, we use Purolator Ground or Loomis Ground as our normal shipping service. It usually takes 2-5 business days with tracking.


                                                                                For orders in the USA, we use USPS service. It usually takes 4-7 business days with tracking if no delay in US customs.


                                                                                60 DAYS WARRANTY

                                                                                BotFeeder products are warranted to be free from defects in materials for sixty days from original date of purchase when used under normal conditions and for the purpose intended.


                                                                                > View more information

                                                                                  $24.99 CAD